Max Motorcycle Hitch Carrier
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
MotoTote Warranty
At a glance: 1-year limited warranty against defects in materials and workmanship
This is MotoTote's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| MotoTote-branded carriers and parts | 1 year from retail purchase date |
| Non-MotoTote products sold with or by MotoTote | Their own manufacturer's warranty |
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Parts that are defective in materials or workmanship are repaired or replaced
- Applies when the carrier was used as instructed, for its intended purpose, and within weight and size limits
- Spare parts remain available to buy after the warranty ends
What's not covered
- Misuse, abuse, or neglect
- Commercial use
- Modifications
- Improper installation or maintenance
- Accidents, off-road damage, or other outside forces
How to make a MotoTote warranty claim
- Email contact@mototote.com
- Include your order receipt, a clear description of the defect, and photos or video
- MotoTote reviews it and decides on repair, replacement, or replacement parts
MotoTote contact: Phone: 888-333-4621 · Email: contact@mototote.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to MotoTote, and help it along either way.
Shop MotoTote at NVMOS
See all MotoTote products, lead times and FAQs →
Disclaimer: The information on this page describes MotoTote's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: MotoTote official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
MotoTote (sometimes searched as Moto Tote) builds hitch-mounted motorcycle carriers in Texas for dirt bikes, dual-sports, scooters and sport bikes. NVMOS carries the Max, Max+, m3, Sport and dual carriers, Mini e-bike racks, and the ramps, tie-downs and light kits that go with them, for anyone with a 2-inch receiver and a bike to haul.
Based in: Coppell, Texas · Made in: Texas (some imported parts) · Since: 1997 · Lead time: In stock: ships in 24–48 hours
Shop all 104 MotoToteWarrantyAll brands
Warranty terms are set by MotoTote, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
MotoTote Max Motorcycle Hitch Carrier
The Max is MotoTote's maximum-stability single carrier for bikes up to 600 lbs: dirt bikes, scooters, vintage bikes and similar machines. It mounts in a standard 2 in. receiver and uses a laser-cut MaxHold track for the rear tire and a StableStop chock up front.
It's built from powder-coated steel with black zinc-coated hardware, and MotoTote designs and assembles it in Texas.
| Spec | Detail |
|---|---|
| Capacity | 600 lbs (272 kg) |
| Carrier weight | 59 lbs (27 kg) |
| Front tire width | Up to 4.75 in. (120 mm) |
| Rear tire width | Up to 6 in. (152 mm) |
| Wheelbase | MaxHold track adjusts to 62 in. (157 cm) |
| Total length | 72.5–78.5 in. (184–199 cm) |
| Loading ramp | 56 in. (142 cm); average slope about 17 degrees |
| Track distance from vehicle | Adjustable: 16, 18 or 20 in. |
| Hitch | Standard 2 in. receiver with enough tongue weight capacity for bike and carrier |
| Construction | Powder-coated steel, textured black finish, black zinc-coated hardware |
| Assembly | About 30–60 minutes with basic tools |
| Tie-down straps | Sold separately; MotoTote lists them in its Tie Downs collection |
| Made in | Designed and assembled in Texas |
What kind of bikes is the Max made for?
Bikes up to 600 lbs with front tires up to 4.75 in. and rear tires up to 6 in. wide. MotoTote lists dirt bikes, scooters and vintage bikes.
What hitch does it need?
A standard 2 in. receiver whose tongue weight rating covers the bike plus the 59 lb carrier. MotoTote has a fit calculator for checking your vehicle.
Are tie-downs included?
Tie-down straps aren't listed with the carrier. It has BroadPull+ arms for strap points, and MotoTote sells straps separately.
How long does it take to assemble?
MotoTote puts it at about 30 to 60 minutes with a few basic tools.
Videos
Install guides & documents
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
