Coachbuilder Strut/Coilover Shim | .50" Front Lift | Fits Toyota Tacoma & Land Cruiser 2024+ & 4Runner 2025+ | Ekstrom Design
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Coachbuilder by Ekstrom Design Warranty
At a glance: No-hassle limited lifetime warranty on Ekstrom-made parts; wear items excluded
This is Coachbuilder by Ekstrom Design's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Products made by Ekstrom Design (e.g., Coachbuilder shackle kits) | Limited lifetime |
| Wear items (leaf spring bushings, heim joints and boots, moving/pivoting parts) | Not covered |
| Third-party brands sold by Ekstrom (e.g., BORA wheel spacers) | Not covered by Ekstrom's warranty |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials and workmanship on parts manufactured by Ekstrom Design and Fabrication Corporation
- Coverage lasts for the life of the product for the original buyer
What's not covered
- Leaf spring bushings
- Heim joints and heim joint boots
- Any moving or pivoting parts
- Products Ekstrom resells but does not make, such as BORA wheel spacers
How to make a Coachbuilder by Ekstrom Design warranty claim
- Contact Ekstrom Design by phone or email to describe the issue
- Follow their instructions for returning the part
Coachbuilder by Ekstrom Design contact: Phone: (801) 635-4872 · Email: ekstrom_design@yahoo.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Coachbuilder by Ekstrom Design, and help it along either way.
Shop Coachbuilder by Ekstrom Design at NVMOS
Coachbuilder Strut/Coilover Shim | .50" Front Lift | Fits Toyota Tacoma, 4Runner & FJ Cruiser 2005–2023 Including TRD Pro | Ekstrom Design
Coachbuilder Strut/Coilover Shim | .250" Front Lift | Fits Toyota Tacoma, 4Runner & FJ Cruiser 2005–2023 Including TRD Pro | Ekstrom Design
Coachbuilder Coilover Bolt Kit | Metric M10x1.50 for Eibach & Old Man Emu BP51 Coilovers | Fits Toyota Tacoma, 4Runner, FJ Cruiser 2005+ & Tundra 1999–2006 | Ekstrom Design
See all Coachbuilder by Ekstrom Design products, lead times and FAQs →
Disclaimer: The information on this page describes Coachbuilder by Ekstrom Design's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Coachbuilder by Ekstrom Design official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Coachbuilder by Ekstrom Design
Coachbuilder is Ekstrom Design's Toyota-only line of billet aluminum suspension and driveline parts, built out of Salt Lake City, Utah. NVMOS carries Coachbuilder lift shackles, strut shims, steering kits, carrier bearing and diff drops, and bump stops for Tundra, Tacoma, 4Runner, FJ Cruiser and more. It's for Toyota owners fine-tuning a lift.
Based in: Salt Lake City, Utah · Founded: 1998 (Coachbuilder line since 2009) · Lead time: Brand ships in 1–2 business days
Shop all 43 Coachbuilder by Ekstrom DesignWarrantyAll brands
Warranty terms are set by Coachbuilder by Ekstrom Design, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Toyota's newest trucks still leave the factory with the familiar stance problem: the front driver-side corner usually sits about .50" lower than the passenger side. This Coachbuilder strut/coilover shim adds .50" of lift to the 2024+ Toyota Tacoma, 2024+ Land Cruiser, and 2025+ 4Runner, so a single shim on the driver side squares the truck up without touching coilover preload. It is CNC machined from T6 6061 billet aluminum, hard black anodized, and made in the USA by Ekstrom Design & Fabrication. Want height as well as correction? Run two shims on the driver side and one on the passenger side, or go up to two per side for a full 1.00" of front lift.
Features
- Provides .50" of front lift per shim — 1:2 ratio, .250" actual thickness
- One shim on the driver side corrects the typical .50" factory lean
- Two shims driver side plus one passenger side adds height while keeping the truck level
- Up to two shims per side for a maximum of 1.00" of lift
- Eliminates the need to add preload to the coilover
- CNC machined from T6 6061 billet aluminum, hard black anodized
- Made in the USA by Ekstrom Design & Fabrication Corporation
This version fits the 2024+ Tacoma and Land Cruiser and the 2025+ 4Runner; each listing includes one shim. If you are running ADS, Fox 2.5 Series, Icon 2.5 Series, or King coilovers, add the Coachbuilder Shim Bolt Kit (SAE 3/8"). Earlier trucks are covered too — browse our coil spacers and shims or the full Coachbuilder lineup.
Complete your Toyota 4Runner build
More parts that fit your Toyota 4Runner and pair well with this one — matched and ready to install.
$20.70
$9.90
$113.75
$4.95
$9.90
More for your Toyota 4Runner
Picked from the 1846 parts we carry for the Toyota 4Runner, matched to 2024+ model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
Coachbuilder Strut/Coilover Shim | .50" Front Lift | Fits Toyota Tacoma & Land Cruiser 2024+ & 4Runner 2025+ | Ekstrom Design FAQs
Which vehicles does this shim fit?
This version is machined for Toyota's newest platforms: the 2024+ Tacoma, the 2024+ Land Cruiser, and the 2025+ 4Runner. If you drive a 2005-2023 Tacoma, 4Runner, or FJ Cruiser — or a Tundra — Coachbuilder makes dedicated shims for those trucks, so pick the listing that matches your model years.
How do I fix the driver-side lean on my truck?
These trucks usually sit about .50" lower at the front driver-side corner. Installing one shim on the driver side raises that corner .50" and squares the stance. If you would rather gain height too, run two shims on the driver side and one on the passenger side — up to two shims per side for a maximum of 1.00" of lift.
Do I need the bolt kit?
Only with certain coilovers. ADS, Fox 2.5 Series, Icon 2.5 Series, and King coilovers require the Coachbuilder Shim Bolt Kit (SKU CBSBK), sold separately. The shim itself is a single piece of CNC machined T6 6061 billet aluminum with a hard black anodized finish.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
