Camburg 2.5 in. Spring Kit w/ Dominator 2.0 R/R Shocks for Jeep Gladiator JT (2020-2026)
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Camburg Engineering Warranty
At a glance: Suspension products are covered while the original purchaser owns the vehicle, wear items for 60 days and coatings for 12 months. Racing use, labor and alignment are not covered.
This is Camburg Engineering's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: November 4, 2026.
Coverage by product line
| Camburg Engineering product | Coverage |
|---|---|
| Camburg suspension products | Against defects in material and workmanship for as long as the original purchaser owns the vehicle the part was first installed on |
| Non-wearable Camburg-made items | Limited lifetime from purchase, original owner, under normal use and maintenance |
| Wearable items (bushings, bump stops, rubber or plastic parts, bearings, tie rod ends, uniballs, heims, ball joints) | 60 days from purchase, manufacturing defects only |
| Coatings and finish | 12 months, structural corrosion and manufacturing defects |
| Non-Camburg products sold by Camburg (shocks and other brands) | The original manufacturer's warranty |
What's covered
- Defects in material and workmanship, for the original purchaser
- Exchange of the defective part for a new product of the same part number
- Structural corrosion and manufacturing defects in coatings for 12 months
- Manufacturing defects in wear items for 60 days from purchase
What's not covered
- Normal wear and tear
- Racing or competitive event use
- Commercial vehicle installations
- Improper installation, or installation on a vehicle the part was not designed for
- Altered parts, misuse, neglect, improper maintenance, accidents and collisions
- Scratches, fading, surface corrosion and other cosmetic issues
- Labor, alignment, shipping, towing, rental vehicles, downtime and inconvenience
- Damage to other components and other consequential damages
- Apparel and other merchandise
How to make a Camburg Engineering warranty claim
- Contact Camburg customer service, or the dealer you bought from, to start the claim.
- Present the warranty certificate along with proof of purchase.
- Return the original product; Camburg exchanges it for a new product of the same part number.
- Camburg reviews each claim case by case and decides at its discretion.
Camburg Engineering contact: Camburg customer service: (714) 848-8880 or 800-990-0905, Monday through Friday, 9 am to 5 pm Pacific; contact form at https://camburg.com/pages/contact-us; returns to Camburg Engineering, 7409 Slater Ave, Huntington Beach, CA 92647 · Warranty page
Bought it from NVMOS? Start with us.
Camburg's terms split structural parts, wear items and coatings, coverage ends if you sell the vehicle, and a claim needs proof of purchase and the original part back. Contact NVMOS first: we have your receipt, can help you tell a defect from normal uniball or bushing wear and will work with Camburg on the exchange. Have your order number and a few photos of the issue ready, then call or text us at (920) 249-7744 or send us a message.
Shop Camburg Engineering at NVMOS
Camburg King 3.0 Performance Kit with KINETIK Billet Uniball Upper Arms for Toyota Tacoma (2005-2023)
Camburg FOX 2.5 Performance Elite DSC KINETIK Series Kit for Ford Bronco (2021-2025, Non-Raptor)
Camburg Trail Series Long Travel Kit with Axles & Slapper Mounts for Toyota Land Cruiser (2024-2025)
See all Camburg Engineering products, lead times and FAQs →
Disclaimer: The information on this page describes Camburg Engineering's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Sources: Camburg warranty policy (official) and Camburg contact page: hours, phone, return address (official) and Camburg FAQ: uniballs, upper arms and long travel (official) and Camburg order processing and shipping policy (official). Last updated on nvmos.com: November 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Camburg Engineering is a Southern California off-road suspension company with more than 25 years in off-road racing, now part of the MagnaFlow Group. At NVMOS we carry Camburg uniball and X-Joint upper control arms, long travel kits, KINETIK billet parts, bump stops, brake lines, axles, hubs and the hardware that keeps them serviceable for the trucks, 4Runners and Broncos we support.
Based in: Huntington Beach, California · Lead time: In-stock parts ship in 1-3 business days; parts stocked at the manufacturer take about 1-2 weeks.
Shop all 565 Camburg EngineeringWarrantyAll brands
Warranty terms are set by Camburg Engineering, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Camburg 2.5 in. Spring Kit w/ Dominator 2.0 R/R Shocks for Jeep Gladiator JT (2020-2026)
Camburg's Gladiator kit takes the factory rake out of a JT and makes room for 35 to 37 in. tires. It lifts the front 2.5 in. with Camburg dual-rate coil springs, keeps the factory rear coils, and replaces all four dampers with Dominator 2.0 remote reservoir shocks valved and sized for the new ride height. Longer sway bar end links and bump stop extensions round it out.
Keeping the stock rear springs is a deliberate call: the Gladiator already sits higher in the rear, so Camburg matched the front spring to it rather than adding rear height you do not need. That keeps the cost down and the bed loaded or empty behavior closer to stock, while the shocks do the work of controlling the extra travel. Camburg arms and track bars can be added later.
| Spec | Detail |
|---|---|
| Fitment | Jeep Gladiator JT (2020-2026) |
| Lift | 2.5 in. front, 0 in. rear (uses factory rear coils) |
| Springs | Camburg dual-rate front coil springs (gray) |
| Shocks | Camburg Dominator 2.0 remote reservoir, front and rear |
| Tire size | 35-37 in. per Camburg |
| Included | Front coil springs (2), shocks (4), sway bar end links (4), front bump stop spacers (2), rear bump stop base plates (2), rear strike pads (2), hardware kit |
| Part number | 30300-0025-007 |
This is a front lift that levels the truck; the rear stays at factory height on the stock coils. If you tow or carry heavy loads in the bed often, ask us about rear spring options first. Plan on an alignment after install. Mojave trucks use different factory suspension, so confirm fitment with us before ordering for one. Not sure it fits your build? Call or text us at (920) 249-7744 with your year, trim and setup and we will confirm it.
Why are there no rear springs?
Camburg designed the Gladiator kit around the factory rear coils, which already match the new front ride height. The kit lifts the front 2.5 in. and the rear stays at stock height.
What is included?
Front coil springs, four Dominator 2.0 remote reservoir shocks, front and rear sway bar end links, bump stop extensions and a hardware kit.
What tire size will fit?
Camburg says 35 to 37 in. tires, depending on wheel offset and bump stop setup.
Will it fit the Mojave?
Camburg lists 2020-2026 Gladiator without trim exclusions, but the Mojave runs different factory suspension. Call us with your trim before ordering.
What is the warranty?
See our Camburg warranty page for the current terms.
Complete your Jeep Gladiator build
More parts that fit your Jeep Gladiator and pair well with this one — matched and ready to install.
$2,055.00
$89.00
$579.00
$444.00
$119.00
More for your Jeep Gladiator
Picked from the 1730 parts we carry for the Jeep Gladiator, matched to 2020–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
Camburg 2.5 in. Spring Kit w/ Dominator 2.0 R/R Shocks for Jeep Gladiator JT (2020-2026) FAQs
Why are there no rear springs?
Camburg designed the Gladiator kit around the factory rear coils, which already match the new front ride height. The kit lifts the front 2.5 in. and the rear stays at stock height.
What is included?
Front coil springs, four Dominator 2.0 remote reservoir shocks, front and rear sway bar end links, bump stop extensions and a hardware kit.
What tire size will fit?
Camburg says 35 to 37 in. tires, depending on wheel offset and bump stop setup.
Will it fit the Mojave?
Camburg lists 2020-2026 Gladiator without trim exclusions, but the Mojave runs different factory suspension. Call us with your trim before ordering.
What is the warranty?
See our Camburg warranty page for the current terms.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
