C4 Fabrication 4Runner Overland Series Front Bumper / 4th Gen / 2003-2009
This product is made to order and is non-refundable. Please review current lead-times prior to placing your order.
Warranty Information
Vendor warranty summary
C4 Fabrication Warranty
At a glance: 1 year from ship date on welds, hardware and mechanical parts; powder coat not covered
This is C4 Fabrication's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Welds, hardware and mechanical parts (manufacturing defects) | 1 year from the ship date |
| Powder coat finish | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Factory defects such as failed or broken welds
- Failed or broken hardware and mechanical parts
- C4 decides whether to send replacement parts or give a full or partial refund
What's not covered
- Powder coat on any part shipped coated or offered with a coating option
- Normal wear, rust and scratches
- Accidents, trail damage and highway damage
- Racing or competition use
- Overloading, wrong assembly or poor maintenance
- Acts of nature
- Parts the customer has modified, or not installed per C4's instructions
- Any damage to your vehicle, cargo, other people or property
How to make a C4 Fabrication warranty claim
- Contact C4 Fabrication by email or phone with your order details
- Describe and photograph the defect
- C4 reviews the claim and chooses the remedy
C4 Fabrication contact: Phone: 1-605-721-2911 · Email: sales@c4fabrication.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to C4 Fabrication, and help it along either way.
Shop C4 Fabrication at NVMOS
C4 Fabrication Tacoma Rock Runner Sliders / 3rd Gen / 2016-2023
C4 Fabrication Tacoma Rock Runner High Clearance Rear Bumper / 3rd Gen / 2016-2023
C4 Fabrication Tacoma High Clearance Fender Liners / 2nd Gen / 2005-2015
See all C4 Fabrication products, lead times and FAQs →
Disclaimer: The information on this page describes C4 Fabrication's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: C4 Fabrication official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
C4 Fabrication builds overland armor for Toyota and Lexus in Chandler, Arizona. NVMOS carries C4 front and rear bumpers, rock sliders, skid plates, body mount relocation kits and MOLLE storage for Tacoma, 4Runner, Tundra, Land Cruiser 250 and Lexus GX. It's for Toyota owners who want armor that fits right and looks the part.
Based in: Chandler, Arizona · Made in: USA (Chandler, Arizona) · Lead time: Bumpers ~8–14 weeks; sliders ~8–10; skids ~2
Shop all 146 C4 FabricationWarrantyAll brands
Warranty terms are set by C4 Fabrication, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Upgrade your 4th Gen 4Runner (2003–2009) with the Overland Series Front Bumper, engineered for clearance, strength, and off-road capability. Designed to improve approach angles and make room for larger tires, this bumper is built from 3/16″ laser-cut P&O steel with 1/4″ thick frame and winch plates for uncompromising durability. Frame support brackets and a washer tank skid come standard, while fully welded 3/4″ D-ring tabs provide dependable recovery points.
The bumper is winch-ready, fitting most 8k-12k winches, with the best performance from synthetic rope and a hawse fairlead. For lighting, the bumper accepts 30″ single-row light bars such as the Baja Designs S8. Pre-drilled turn signal holes are included, with signals or caps supplied depending on year range, and a bolt-on top fill plate is provided for 2003-2005 models.
The Overland Series Front Bumper is available in multiple bull bar options. Bull bar tubing is made from .120 wall 1-3/4″ diameter HREW tubing for added protection. Unless ordered with a powder coat finish, the bumper must be painted or powder coated before installation to prevent rust.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
