C4 Fabrication 4Runner Lo-Pro Winch Bumper / 5th Gen / 2014-2024
Warranty Information
Vendor warranty summary
C4 Fabrication Warranty
At a glance: 1 year from ship date on welds, hardware and mechanical parts; powder coat not covered
This is C4 Fabrication's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Welds, hardware and mechanical parts (manufacturing defects) | 1 year from the ship date |
| Powder coat finish | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Factory defects such as failed or broken welds
- Failed or broken hardware and mechanical parts
- C4 decides whether to send replacement parts or give a full or partial refund
What's not covered
- Powder coat on any part shipped coated or offered with a coating option
- Normal wear, rust and scratches
- Accidents, trail damage and highway damage
- Racing or competition use
- Overloading, wrong assembly or poor maintenance
- Acts of nature
- Parts the customer has modified, or not installed per C4's instructions
- Any damage to your vehicle, cargo, other people or property
How to make a C4 Fabrication warranty claim
- Contact C4 Fabrication by email or phone with your order details
- Describe and photograph the defect
- C4 reviews the claim and chooses the remedy
C4 Fabrication contact: Phone: 1-605-721-2911 · Email: sales@c4fabrication.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to C4 Fabrication, and help it along either way.
Shop C4 Fabrication at NVMOS
C4 Fabrication Tacoma Rock Runner Sliders / 3rd Gen / 2016-2023
C4 Fabrication Tacoma Rock Runner High Clearance Rear Bumper / 3rd Gen / 2016-2023
C4 Fabrication Tacoma High Clearance Fender Liners / 2nd Gen / 2005-2015
See all C4 Fabrication products, lead times and FAQs →
Disclaimer: The information on this page describes C4 Fabrication's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: C4 Fabrication official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
C4 Fabrication builds overland armor for Toyota and Lexus in Chandler, Arizona. NVMOS carries C4 front and rear bumpers, rock sliders, skid plates, body mount relocation kits and MOLLE storage for Tacoma, 4Runner, Tundra, Land Cruiser 250 and Lexus GX. It's for Toyota owners who want armor that fits right and looks the part.
Based in: Chandler, Arizona · Made in: USA (Chandler, Arizona) · Lead time: Bumpers ~8–14 weeks; sliders ~8–10; skids ~2
Shop all 146 C4 FabricationWarrantyAll brands
Warranty terms are set by C4 Fabrication, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The 5th Gen 4Runner Lo-Pro Front Bumper brings low-profile styling and hardcore off-road capability to your rig. Designed with sensor compatibility and aftermarket integration in mind, this bumper is compatible with TSS on 2020+ models, and Multi-Terrain Monitoring (MTM) systems on 2022+ vehicles. The Full Height Bull Bar does NOT interfere with TSS, however, the Mid Height Bull Bar DOES block the TSS sensor. The 2022+ TRD Sport and the 2014+ Limited trims are NOT compatible with the Lo Pro Bumper.
Engineered to accept most 8K–12K winches, the Lo-Pro makes recovery-ready look clean and purposeful. Winches with relocatable control boxes fit best, while some integrated models may require minor trimming. We recommend synthetic rope with a hawse fairlead for optimal fitment in the recessed fairlead plate. We have confirmed fitment with ComeUp, Smittybilt X20, Warn Zeon and VR series winches.
This bumper is purpose-built for 30” single-row light bars, with a fit dialed in for the Baja Designs S8, RIGID 30” SR series, and Extreme LED 30” 5D. Other light bars may vary in fitment. All required brackets and hardware are included for a seamless install. Please note that some cutting of the factory bumper is required. Whether you're building for weekend trails or daily utility, the C4 Lo-Pro Front Bumper brings the strength, style, and reliability you demand. Please note that unless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.
Guides from the NVMOS crew
Your article title
Your article title
Your article title
Featured Collaborators
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with PayPal Credit at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
