In-stock parts ship in 24–48 hours · Questions? Real humans: (920) 249-7744

Shop by Vehicle Pick your rig and see everything that fits
1
2
3
Browse popular rigs & all vehicles Hide vehicles
SKU: 870086

Baja Designs sPOD Touchscreen BantamX Kit - 2021-2026 Ford F-150 & Raptor

$1,217.95

180-Day ReturnsOn uninstalled, unused parts Real humans who wheel(920) 249-7744 PayPal Credit acceptedFinancing option at checkout Secure checkoutEncrypted payment
Confirmed fit: 2021–2026 Ford F-150
Verified to fit the 2021–2026 Ford F-150.
Warranty Information

Vendor warranty summary

Baja Designs Warranty

At a glance: Limited lifetime (or 49,930 hours) on lights for recreational use; 5 years for commercial use

This is Baja Designs's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.

Coverage by product

Product or component Coverage
Light bars & auxiliary lights (recreational use) Limited lifetime or 49,930 hours of operation, whichever comes first
Lights in commercial use (agriculture, industrial, mining, public safety) 5 years or 49,930 hours, whichever comes first
sPOD electronics (bought after 4/1/23) 5 years limited
Third-party brackets, harnesses, switches Original manufacturer's warranty only
  • Original purchaser only — coverage does not transfer if you sell it.
  • Keep your NVMOS order confirmation — proof of purchase is required.

What's covered

  • Defects in design and manufacturing only
  • Baja Designs pays return freight if the defective item is sent back within 90 days of delivery

What's not covered

  • Installation errors and installation labor
  • Wear and tear, accidents, collisions, acts of God
  • Misuse, abuse, or modifications not done by Baja Designs
  • sPOD: water damage, reverse polarity, improper install
  • Full warranty does not apply to items bought from unauthorized Amazon, eBay or Walmart resellers
  • After 90 days from delivery, customer prepays freight to Baja Designs

How to make a Baja Designs warranty claim

  • Call Baja Designs technical support to troubleshoot
  • If inspection is needed, Baja issues an RMA form and number
  • Ship the item marked with the RMA# to Baja Designs - Warranty, 2950 Norman Strasse Rd., San Marcos, CA 92069

Baja Designs contact: Phone: (760) 560-2252 · Email: bdwarranty@bajadesigns.com · Claim page / support

Bought it from NVMOS? Start with us.

Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Baja Designs, and help it along either way.

Shop Baja Designs at NVMOS

See all Baja Designs products, lead times and FAQs →

Disclaimer: The information on this page describes Baja Designs's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Baja Designs official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.

About the brand

Baja Designs

Baja Designs is the San Marcos, California lighting company that built the first forward-projecting LED light bar. NVMOS carries their pods, light bars and vehicle-specific bumper, fog and reverse kits for Ford, Toyota, Jeep, RAM and GM trucks, for drivers who want to actually see the trail at night.

Based in: San Marcos, California · Founded: 1992 · Lead time: In-stock ships in 24–48 hrs

Baja Designs warranty: Limited lifetime (or 49,930 hours) on lights for recreational use; 5 years for commercial use. Read the full summary

Warranty terms are set by Baja Designs, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.


This kit puts the sPOD touchscreen into the 2021-on F-150 and F-150 Raptor, in place of the in-cab sunglass holder. A BantamX module does the work, with eight circuits at 30A each and a single ethernet cable into the cab.

The touchscreen reads out battery voltage, shows current draw for each switch, and reports board temperature. It also takes up to three lines of text for legends, shuts the backlight off after 30 minutes idle, and powers down after six hours of inactivity or when the engine is not running. One screen can control up to 32 circuits, and up to four BantamX units can be daisy chained to one touchscreen.

The trade-off is cold weather: the vendor warns the display becomes inoperable below 20 degrees F, so let the cab warm up first.

Fitment

Ford F-150, 2021-2026, and F-150 Raptor, 2021-2026, including the 2024-2026 F-150 Raptor 37/R.

What's included

The touchscreen comes with its own mounting bracket. The listing does not itemize the rest of the box, so ask us if you need a full contents check.

Install notes

Replaces the in-cab sunglass holder. The vendor says there is no cutting, no fishing wires into the cab, and no tapping into the vehicle electrical system.

Bluetooth in the touchscreen is for programming rather than remote control; range is roughly 5 to 15 feet.

Questions before you order?

Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.

Finish the whole truck in one order

Complete your F-150 build

More parts that fit your F-150 and pair well with this one — matched and ready to install.

Baja Designs sPOD Touchscreen BantamX Kit - 2021-2026 Ford F-150 & Raptor (this item) What you’re viewing $1,217.95
✓ Tailgate Letter Inserts Finish $79.99
✓ Platinum Tailgate Letter Inserts Finish $39.99
✓ Rear Tailgate Letter Inserts Finish $59.99
✓ Tailgate Letter Inserts Finish $39.99
Build total (1 items)
$1,217.95
The complete look for your F-150.
Set any options above, then add them all in one click — one checkout, one shipment.
Everything else that fits this truck

More for your Ford F-150

Picked from the 592 parts we carry for the Ford F-150, matched to 2021–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.

Shop all 592 parts for your Ford F-150 →

Specifications

  • Circuits: 8 at 30A at 12.5 VDC each
  • Terminal block: 16-position
  • Controller ports: 2 (RJ45)
  • Fuse: 100A in-line
  • Daisy chain: up to 4 BantamX units per touchscreen
  • Backlight timeout: 30 minutes; deep sleep after 6 hours
  • Cold limit: inoperable below 20 degrees F
  • Part number: 870086

Baja Designs sPOD Touchscreen BantamX Kit FAQs

Does the touchscreen work in the cold?

Not below 20 degrees F. The vendor says to let the cab warm up before operating it.

Does it fit the Raptor?

Yes. The listing covers the 2021-2026 F-150 and F-150 Raptor, including the 2024-2026 Raptor 37/R.

Can it show how much each accessory draws?

Yes. It has an amperage meter for each switch, plus voltage feedback and board temperature.

Can I add more modules?

Yes. One touchscreen can control up to 32 circuits, and up to four BantamX units can be daisy chained.

Multi-column

Minimalist icon of three people for social, community, or group activities
Join Our Community

For all things NVMOS, check us out on Instagram and Facebook!

Simple black and white credit card icon for payment or checkout options
Financing Available

Buy now, pay later with PayPal Credit — available at checkout.

black and white envelope mail icon for email or newsletter sign up
Contact Us

Have a question? Just send us an e-mail at support@nvmos.com