Baja Designs sPOD HD BantamX Kit - 2022-2023 Toyota Tundra
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Baja Designs Warranty
At a glance: Limited lifetime (or 49,930 hours) on lights for recreational use; 5 years for commercial use
This is Baja Designs's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: November 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Light bars & auxiliary lights (recreational use) | Limited lifetime or 49,930 hours of operation, whichever comes first |
| Lights in commercial use (agriculture, industrial, mining, public safety) | 5 years or 49,930 hours, whichever comes first |
| sPOD electronics (bought after 4/1/23) | 5 years limited |
| Third-party brackets, harnesses, switches | Original manufacturer's warranty only |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in design and manufacturing only
- Baja Designs pays return freight if the defective item is sent back within 90 days of delivery
What's not covered
- Installation errors and installation labor
- Wear and tear, accidents, collisions, acts of God
- Misuse, abuse, or modifications not done by Baja Designs
- sPOD: water damage, reverse polarity, improper install
- Full warranty does not apply to items bought from unauthorized Amazon, eBay or Walmart resellers
- After 90 days from delivery, customer prepays freight to Baja Designs
How to make a Baja Designs warranty claim
- Call Baja Designs technical support to troubleshoot
- If inspection is needed, Baja issues an RMA form and number
- Ship the item marked with the RMA# to Baja Designs - Warranty, 2950 Norman Strasse Rd., San Marcos, CA 92069
Baja Designs contact: Phone: (760) 560-2252 · Email: bdwarranty@bajadesigns.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Baja Designs, and help it along either way.
Shop Baja Designs at NVMOS
Baja Designs Ford Bull Bar Light Kit - Ford 2023-2026 F-250/350 Super Duty
Baja Designs 7XL Linkable Bumper Light Kit - Ford 2023-2026 F-250/350 Super Duty
Baja Designs Ford XL Linkable Bumper Light Kit - Ford 2021-2026 Bronco; 2022-2026 Bronco Raptor; NOTE: w/ OE Steel Bumper
See all Baja Designs products, lead times and FAQs →
Disclaimer: The information on this page describes Baja Designs's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Baja Designs official warranty information. Last updated on nvmos.com: November 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Baja Designs is the San Marcos, California lighting company that built the first forward-projecting LED light bar. NVMOS carries their pods, light bars and vehicle-specific bumper, fog and reverse kits for Ford, Toyota, Jeep, RAM and GM trucks, for drivers who want to actually see the trail at night.
Based in: San Marcos, California · Founded: 1992 · Lead time: In-stock ships in 24–48 hrs
Shop all 552 Baja DesignsWarrantyAll brands
Warranty terms are set by Baja Designs, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This sPOD HD BantamX kit is made to replace the in-cab sunglass holder in the 2022-on Tundra with the HD panel, set at an angle that makes the switches easy to reach. The BantamX module behind it supplies eight circuits at 30A each.
One ethernet cable runs into the cab, and the vendor says there is no cutting, no fishing wires and no tapping into the vehicle electrical system. The module runs on 12 or 24 VDC, has two RJ45 controller ports and an 8-position input terminal block, and uses current-sensing MOSFETs instead of fuses and relays.
The HD panel has a machined billet aluminum housing, silicone buttons, backlighting on all eight switches and an RGB backlight you can set to match the dash. The free sPOD app covers dimming, strobe, flash, momentary and switch linking, while circuit timers, switch lockout and programmable current limiting need the paid Pro-Series app.
Fitment
The vendor fit line reads Toyota Tundra 2022-2023, while the product title says 2022-2026. We list it as 2022-2023; check with us before ordering for a 2024 or newer truck.
What's included
The HD panel ships with a 10-foot CAT-6 ethernet cable and one sheet of 72 legends per the listing. Ask us for a full contents check if you want one.
Install notes
The panel can sit up to 25 feet from the BantamX on CAT-6. Bluetooth in the HD panel is mainly for programming, with a range of roughly 5 to 15 feet depending on placement and phone.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text us at (920) 249-7744.
Install guides & documents
Complete your Toyota Tundra build
More parts that fit your Toyota Tundra and pair well with this one — matched and ready to install.
$1,070.95
$153.95
$69.99
$79.95
$169.95
More for your Toyota Tundra
Picked from the 2208 parts we carry for the Toyota Tundra, matched to 2022–2023 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Baja Designs sPOD HD BantamX Kit FAQs
Does it fit a 2024 Tundra?
The product title says 2022-2026, but the vendor fit line says 2022-2023. Ask us before ordering for 2024 or newer.
Is Bluetooth good for remote control?
It is mainly for programming. Range is roughly 5 to 15 feet depending on placement, phone and case.
Which app features are free?
Dimming, strobe, flash, momentary, switch linking and on-road or off-road modes. Circuit timers, lockout and current limiting need the Pro-Series app.
Can I connect outside controls?
The vendor lists third-party switches, sensors and Arduino or Raspberry Pi, but only in conjunction with an sPOD controller.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
