2016-2023 Toyota Tacoma | Center Mount Front Bumper V2
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
DV8 Offroad Warranty
At a glance: 1-year limited warranty against defects in materials and workmanship
This is DV8 Offroad's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| All DV8-manufactured parts | 1 year from purchase |
| Third-party products sold by DV8 | Original manufacturer's warranty only |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials and workmanship on DV8-made parts
- DV8 decides whether to repair or replace with an equivalent product
What's not covered
- Installation, labor and freight
- Normal wear and tear
- Abuse, misuse, collision damage or neglect
- Altered, modified or improperly installed products
- Consequential losses such as vehicle downtime
How to make a DV8 Offroad warranty claim
- Notify DV8 within one month of discovering the defect
- Return the part to DV8 at your expense within the 1-year period
- DV8 inspects it and repairs or replaces if the defect is confirmed
DV8 Offroad contact: Phone: 855-680-9595 · Email: sales@dv8offroad.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to DV8 Offroad, and help it along either way.
Shop DV8 Offroad at NVMOS
883 Simulated Beadlock Wheel | Matte Bronze 20" 5x127
2021-2026 Ford Bronco | Adaptive Cruise Control Relocation Bracket
2021-2026 Ford Bronco | Digital Device Dash Mount
See all DV8 Offroad products, lead times and FAQs →
Disclaimer: The information on this page describes DV8 Offroad's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: DV8 Offroad official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
DV8 Offroad designs steel armor and accessories in Chandler, Arizona and Riverside, California. NVMOS carries their bumpers, skid plates, rock sliders, fender flares, MOLLE storage, racks and interior parts for Jeep Wrangler and Gladiator, Ford Bronco, and a growing list of Toyota, Ford, GM and Ram trucks.
Based in: Chandler, Arizona · Designed in: Chandler, AZ & Riverside, CA · Lead time: In-stock ships in 24–48 hrs
Shop all 493 DV8 OffroadWarrantyAll brands
Warranty terms are set by DV8 Offroad, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
DV8 Offroad Center Mount Front Bumper V2 — 2016-2023 Toyota Tacoma (FBTT1-05)
The V2 center-mount bumper puts a steel winch-and-recovery section in the middle of the third-gen Tacoma while the factory corners stay put. It comes with a bolt-on steel bull bar that shields the grille from brush and carries a 20-inch light bar, and you can run the bumper with or without it.
It is 3mm and 5mm steel in micro-texture black powder coat, retains the factory fog lights and adaptive cruise, and leaves the front camera clear.
| Spec | Detail |
|---|---|
| SKU | FBTT1-05 |
| Fitment | 2016-2023 Toyota Tacoma |
| Not compatible | TRD Pro skid plate |
| Material | 3mm / 5mm steel |
| Finish | Micro-texture black powder coat |
| Included | Bumper and bolt-on steel bull bar |
| Recovery | Winch mount; two 1-inch D-ring mounts for 3/4-inch shackles |
| Lighting | One 20-inch light bar on the bull bar |
| Install | Minor cutting; about 4 hours |
| Warranty | One-year limited warranty from DV8 Offroad against defects in workmanship and material |
Does this work with a TRD Pro?
Not with the TRD Pro skid plate. DV8 recommends pairing the bumper with its 3rd Gen Tacoma Front Skid Plate on TRD Pro trucks.
Do I have to run the bull bar?
No. It bolts on, so you can run the bumper with or without it.
Will I keep fog lights and adaptive cruise?
Yes. The OEM fog lights and ACC are retained, and the front camera is not obstructed.
Is cutting required?
Minor cutting. DV8 estimates about four hours.
Compatibility
| 2016-2023 Toyota Tacoma | Will not fit with the OEM TRD Pro skid plate. |
|---|
Install guides & documents
Complete your Toyota Tacoma build
More parts that fit your Toyota Tacoma and pair well with this one — matched and ready to install.
$649.99
$679.00
$1,649.00
$229.00
$59.00
More for your Toyota Tacoma
Picked from the 2053 parts we carry for the Toyota Tacoma, matched to 2016–2023 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
