Toyota 4Runner Swing Arms Add-On | 2025-2027
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
CBI Offroad Fab Warranty
At a glance: Limited lifetime on CBI-made parts for the original owner; powder coat not covered
This is CBI Offroad Fab's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: November 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| CBI-manufactured parts (bumpers, sliders, armor, etc.) | Limited lifetime (original owner) |
| U-bolts | 1 year |
| Pull pins | 1 year |
| Hardware kits | 1 year (wear item) |
| CBI latch, latch catch, hub rebuild kit | Not covered (wear parts) |
| Powder coat finish | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in CBI-manufactured parts for as long as the original buyer owns them
- Missing parts or hardware if reported within 90 days
- CBI's remedy is limited to repair, replacement or refund
What's not covered
- Powder coat finish of any kind
- Normal wear, cosmetic rust and scratches
- Accidents, unlawful vehicle use, racing or competition
- Any customer modification or repair
- Misuse, neglect, overloading or improper assembly/installation
- Lost profits, consequential damages or damage to the vehicle
- Items lost in transit on return
How to make a CBI Offroad Fab warranty claim
- Test-fit the product and check all hardware before installing
- Submit a claim through the online warranty form (phone claims not accepted)
- Include a copy of your original invoice
- Wait for an RMA number (reply in about 2-3 business days)
- Ship the item to CBI, at your cost, with tracking and insurance, RMA printed on the label and box
CBI Offroad Fab contact: Phone: (866) 522-0697 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to CBI Offroad Fab, and help it along either way.
Shop CBI Offroad Fab at NVMOS
Toyota Tacoma Classic Front Bumper | 2024-2026
Chevy Colorado ZR2/Z71 Full Overland Skid Plates | 2015-2022
Chevy Colorado ZR2/Z71 Rear Skid Plates | 2015-2022
See all CBI Offroad Fab products, lead times and FAQs →
Disclaimer: The information on this page describes CBI Offroad Fab's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: CBI Offroad Fab official warranty information. Last updated on nvmos.com: November 4, 2026. See our return policy for NVMOS's own terms.
About the brand
CBI Offroad Fab builds steel and aluminum armor in Idaho Falls, Idaho. NVMOS carries CBI bumpers, rock sliders, skid plates and light brackets for Toyota Tacoma, 4Runner, Tundra, Land Cruiser 250, Lexus GX470, Chevy Colorado, Nissan Frontier and Sprinter owners who want their underside to stay intact.
Based in: Idaho Falls, Idaho · Made in: USA (Idaho Falls) · Building since: 1999 · Lead time: Built to order: about 2–12 weeks
Shop all 273 CBI Offroad FabWarrantyLead timesAll brands
Warranty terms are set by CBI Offroad Fab, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
CBI Offroad Fab Swing Arms Add-On for the 2025-2027 Toyota 4Runner
This is CBI Offroad Fab's dual swing arm add-on for the 6th Gen 4Runner, model years 2025-2027. It bolts onto CBI's 6th Gen 4Runner rear bumper and turns it into a two-arm setup: one arm carries the spare, the other carries fuel cans and recovery gear. Browse Toyota 4Runner parts.
The two arms open independently, so you can get into the hatch or grab gear from one side without swinging the whole load out of the way. Relocating the spare from under the truck to the arm is also the easiest way to clean up the rear underside, which CBI says helps ground clearance and departure angle. The install is bolt-on, with no custom fabrication.
The important catch: this add-on does not work by itself. It needs CBI's rear bumper for the 2025-2027 4Runner, sold separately, and it will not mount to the factory bumper or to another brand's bumper. If you are starting from scratch, compare the cost against CBI's complete swing arm rear bumper, which comes with an arm already.
Choose bare metal or black powder coat to match your bumper, and a straight or angled tire carrier. CBI builds these to order, so ask us about the current lead time.
| Spec | Detail |
|---|---|
| Brand | CBI Offroad Fab |
| Type | Dual swing arm add-on |
| Finish | Bare metal or black powder coat |
| Tire carrier | Straight or angled |
| Carries | Full-size spare, jerry cans, recovery gear |
| Requires | CBI 6th Gen 4Runner rear bumper (sold separately) |
| Part numbers | 200-000-011-211 to 200-000-011-214 (by option) |
2025-2027 Toyota 4Runner (6th Gen) with the CBI Offroad Fab 6th Gen 4Runner rear bumper. Does not mount to the factory bumper.
Bolt-on to the CBI rear bumper with no custom fabrication. CBI publishes an install guide for it, and we can send it over before you order.
Complete your Toyota 4Runner build
More parts that fit your Toyota 4Runner and pair well with this one — matched and ready to install.
$1,499.00
$169.00
$64.95
$19.99
$39.99
More for your Toyota 4Runner
Picked from the 1846 parts we carry for the Toyota 4Runner, matched to 2025–2027 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Toyota 4Runner Swing Arms Add-On | 2025-2027 FAQs
Will it bolt to my factory bumper?
No. It requires the CBI Offroad Fab 6th Gen 4Runner rear bumper, sold separately.
What can the arms carry?
A full-size spare on one arm, and jerry cans or recovery gear on the other.
Is welding needed?
No. It is a bolt-on install with no custom fabrication.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
