Toyota - 4Runner - 2025-Present - 6th Gen - Non Hybrid - Explore Series - Rear Plate System
Please allow 7-8 weeks for fulfillment. This product is made to order and is non-refundable.
Warranty Information
Vendor warranty summary
Goose Gear Warranty
At a glance: No written warranty published — we handle defects with the brand for you
This is Goose Gear's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
What to expect
Goose Gear doesn't publish a written warranty that we could find. In practice, parts that arrive damaged or show a manufacturing defect are handled between us and Goose Gear — you don't have to chase the brand on your own.
What Goose Gear does publish
- Contact Goose Gear directly with proof of purchase and a description/photos of the defect
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Goose Gear, and help it along either way.
Shop Goose Gear at NVMOS
Scout Tuktut Offset Plate Drivers Side
Toyota Tacoma 2005-2023 2nd and 3rd Gen Double Cab Version 2 - Second Row Seat Delete Plate System
Jeep Wrangler 2007-2018 JKU 4 Door - Second Row Seat Delete Plate System - V2
See all Goose Gear products, lead times and FAQs →
Disclaimer: The information on this page describes Goose Gear's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Goose Gear builds modular storage and sleep systems in Colorado, starting with a vehicle-specific plate and stacking drawers, kitchens and sleeping platforms on top. NVMOS carries plate systems, drawer modules, packages and camper interiors for Toyota, Lexus, Jeep, Ford, Ram, Ineos, Rivian and Winnebago Revel builds.
Based in: Grand Junction, Colorado · Made in: USA (Colorado) · Lead time: Built to order, about 10 weeks typical
Shop all 504 Goose GearWarrantyAll brands
Warranty terms are set by Goose Gear, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The 6th Gen Toyota 4Runner rear plate system for Non-Hybrid vehicles is here. Non-Third-Row vehicles only.
Featuring 4 hatches to access the storage space below the rear plate. Two hatches in the rear cargo area and two hatches just behind the second-row seats. This Goose Gear Plate System is the foundation for your build. Providing a secure and stable place to strap your gear, or better yet, add some Goose Gear Drawer or Kitchen Modules for superior storage and accessibility.
This product is 100% Bolt-In and is completely reversible so you can put your rig back to stock form later if you choose.
Other options include extending forward with our Second Row Delete Plate Systems. We offer a low version seat delete that ties directly into the rear of our 6th Gen 4Runner Base Plate as well as a module-based version. The module-based version is designed to secure to the rear of our drawer modules at a 10" height X 34" depth.
Space below the large hatches is approximately 3.5" (88mm) deep. Space below the small hatches behind the second-row seat is approximately 2" (50mm) deep.
Product Weight: 38 pounds
Usable Space 43-3/4" (1110mm) Wide x 42-3/8" (1075mm) Long
This plate is compatible with the following Modules:
CampKitchen 2.2, IceBox 1.2 and IceBox 1.2 with Top Drawer
Single Drawer Modules in 19-3/16" width and 24-3/16" width, 8", 10" and 12" heights, 30" and 34" depths. Module based seat delete is designed around the 19-3/16" and 24-3/16" wide x 10" high x 34" deep modules only.
Double Drawer Modules in 19-3/16" with and 24-3/16" width, 15", 19" and 22" heights, 30" depths only.
Side X Side Drawer Modules in 43-3/8" widths, 8", 10", and 12" heights, 30" and 34" depths. Module based seat delete is designed around the 43-3/8" wide x 10" high x 34" deep module only.
6th Gen Non Hybrid Specific - Side X Side Drawer Modules with Fitted Top Plates in 43-3/8" Width X 10" Height X 34" Depth.
As shown in the photos, the seat backs are approximately 8" above the top of the plate at their lowest point and about 10" above the plate at their highest point.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with PayPal Credit at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
