In-stock parts ship in 24–48 hours · Questions? Real humans: (920) 249-7744

Shop by Vehicle Pick your rig and see everything that fits
1
2
3
Browse popular rigs & all vehicles Hide vehicles
SKU: 1601277

TeraFlex JK Upper Stud Frame Bracket Kit (Stud, Hitch Pin Clip, Nut) for Sway Bar QD - Wrangler JK 2007-2018

$42.99

180-Day ReturnsOn uninstalled, unused parts Real humans who wheel(920) 249-7744 Financing availableAffirmPayPal CreditFor qualified buyers at checkout Secure checkoutEncrypted payment
Confirmed fit: 2007–2018 Jeep Wrangler
Verified to fit the 2007–2018 Jeep Wrangler.
Warranty Information

Vendor warranty summary

TeraFlex Warranty

At a glance: Lifetime on suspension, steering and armor; 1 year on Falcon shocks and drivetrain; 90 days on finish

This is TeraFlex's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.

Coverage by product

Product or component Coverage
Suspension (coils, bump stops, control arms, track bars, sway bars/links, IR bushings) Lifetime
9550 shocks and stabilizer Lifetime
Steering and brakes (ball joints, tie rods, drag links, big brake kits, rotors, brake lines) Lifetime
Body armor (skids, racks, Alpha carrier, CB mounts) Lifetime
Wheels and adapters Lifetime
Delta Brake Kit 3 years
Falcon shocks (all series) 1 year
Axle assemblies, housings, knuckles, shafts, conversions 1 year
Alpine control arm and track bar bushings; driveshaft parts; transfer case kits 1 year
Recovery gear (straps, D-rings) 1 year
Paint and powder coat 90 days (defects only)
Wear items (brake pads, rotors) Not covered
  • Original purchaser only — coverage does not transfer if you sell it.
  • Keep your NVMOS order confirmation — proof of purchase is required.

What's covered

  • Defects in materials and workmanship
  • TeraFlex chooses to repair, replace or refund at no charge (except inbound shipping)
  • TeraFlex pays the freight to send the part back to you

What's not covered

  • Improper use, failure to follow instructions, or improper installation/maintenance
  • Modifications or unauthorized repair
  • Normal wear and tear, and finish beyond the 90-day term
  • Racing or competition use
  • Shipping/storage damage and other outside causes
  • Removal labor (customer's responsibility)

How to make a TeraFlex warranty claim

  • Call TeraFlex customer service, Mon-Fri 8am-5pm MST
  • Have proof of purchase or the original invoice ready
  • Remove the part and ship it in at your cost

TeraFlex contact: Phone: (801) 713-3314 · Claim page / support

Bought it from NVMOS? Start with us.

Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to TeraFlex, and help it along either way.

Shop TeraFlex at NVMOS

See all TeraFlex products, lead times and FAQs →

Disclaimer: The information on this page describes TeraFlex's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: TeraFlex official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.

About the brand

TeraFlex

TeraFlex has built Jeep suspension since 1996, works out of West Jordan, Utah, and now covers the Ford Bronco, Toyota Tacoma and Super Duty too. NVMOS carries TeraFlex lift kits, Falcon shocks, Alpine control arms, sway bars, ball joints, wheel adapters and Nomad and Olympus wheels. For Jeep and Bronco owners building for the trail.

Based in: West Jordan, Utah · Made in: USA (Utah) · Founded: 1996 (manufacturing) · Lead time: In-stock items ship in 24–48 hours

TeraFlex warranty: Lifetime on suspension, steering and armor; 1 year on Falcon shocks and drivetrain; 90 days on finish. Read the full summary

Warranty terms are set by TeraFlex, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.


If you run TeraFlex quick disconnect sway bar links, the upper stud and its hardware are the parts that take the abuse of being unplugged and reconnected. This replacement upper stud frame bracket kit supplies the stud, hitch pin clip and nut, so you can restore the upper mount on a JK without buying a whole new link set.

TeraFlex describes the kit as all the upper mounting components required to properly mount your sway bar link when it is disconnected for off-road use. In other words, it is what the link hangs from when it is swung up out of the way on the trail.

Fitment

Listed for the 2007-2018 Jeep Wrangler JK and used with the TeraFlex JK sway bar quick disconnect system. The source listing is short, so call us if you need to confirm it against your particular link kit before ordering.

Questions before you order?

Fitment questions are easier to settle before the box ships. Call or text us at (920) 249-7744.

Finish the whole truck in one order

Complete your Jeep Wrangler build

More parts that fit your Jeep Wrangler and pair well with this one — matched and ready to install.

TeraFlex JK Upper Stud Frame Bracket Kit (Stud, Hitch Pin Clip, Nut) for Sway Bar QD - Wrangler JK 2007-2018 (this item) What you’re viewing $42.99
Build total (1 items)
$42.99
The complete look for your Jeep Wrangler.
Set any options above, then add them all in one click — one checkout, one shipment.
Everything else that fits this truck

More for your Jeep Wrangler

Picked from the 6389 parts we carry for the Jeep Wrangler, matched to 2007–2018 model years. Check the years and trim in each title — or call us and we’ll confirm fit.

Shop all 6389 parts for your Jeep Wrangler →

Specifications

  • Brand: TeraFlex
  • Part number: 1601277
  • Includes: stud, hitch pin clip, nut
  • Use: sway bar quick disconnect upper mount
  • Fitment: 2007-2018 Jeep Wrangler JK

TeraFlex JK Upper Stud Frame Bracket Kit (Stud, Hitch Pin Clip, Nut) for Sway Bar QD FAQs

What is in the kit?

A stud, hitch pin clip and nut, forming the upper frame bracket hardware.

What is it for?

It provides the upper mounting components for the sway bar link when disconnected for off-road use.

Does it fit the JL?

No. It is listed for the 2007-2018 JK.

Multi-column

Minimalist icon of three people for social, community, or group activities
Join Our Community

For all things NVMOS, check us out on Instagram and Facebook!

Simple black and white credit card icon for payment or checkout options
Financing Available

Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

black and white envelope mail icon for email or newsletter sign up
Contact Us

Have a question? Just send us an e-mail at support@nvmos.com