TeraFlex and Falcon Steering Package - Jeep Wrangler JL and Gladiator JT
Warranty Information
Vendor warranty summary
Clayton Off Road Warranty
At a glance: Limited lifetime on control arms and track bars; 1 year on joints, bushings, springs, skids and brackets
This is Clayton Off Road's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Control arms and track bars (bending or breaking) | Limited lifetime (original buyer) |
| Johnny Joint bushings, GIRRO joints, washers, snap rings, rubber bushings | 1 year (workmanship defects) |
| Brake lines, coil springs, leaf springs | 1 year (workmanship defects) |
| Skid plates, mounting brackets, hardware | 1 year (workmanship defects) |
| Non-Clayton products sold by Clayton | That maker's warranty |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Control arms and track bars that bend or break from a manufacturing defect
- Workmanship defects on wear and other components for 1 year from purchase
What's not covered
- Minor finish flaws on powder-coated or plated parts from shipping
- Labor, towing, shipping, taxes, loss of use or revenue
- Abuse, accidents, alteration, modification, tampering, neglect or misuse
- Improper installation
- Sanctioned racing use
- Damage from loose or poorly maintained jam nuts (treated as neglect)
- Any item modified in any way
How to make a Clayton Off Road warranty claim
- Contact Clayton Off Road to get an RGA (return goods authorization) number
- Ship the part back at your cost, insured; C.O.D. packages are refused
- Pay shipping on the replacement part as well
- For non-Clayton parts, contact that manufacturer directly
Clayton Off Road contact: Phone: (203) 691-8593 · Email: customerservice@claytonoffroad.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Clayton Off Road, and help it along either way.
Shop Clayton Off Road at NVMOS
![Jeep Wrangler Engine Skid Plate (1996-2006, TJ/LJ) [6 Cyl ONLY]](https://cdn.shopify.com/s/files/1/0861/5113/5535/files/4100900.jpg?v=1776202964&width=400)
Jeep Wrangler Engine Skid Plate (1996-2006, TJ/LJ) [6 Cyl ONLY]
Jeep OVERLAND+ Short Rear Upper Control Arms (1993-2006, TJ/LJ/ZJ)
Jeep Wrangler Adjustable Front Sway Bar End Links (2018+, JL/JT)
See all Clayton Off Road products, lead times and FAQs →
Disclaimer: The information on this page describes Clayton Off Road's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Clayton Off Road official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Clayton Off Road builds Jeep suspension in the USA and ships it from Hamden, Connecticut. NVMOS carries Clayton lift kits, control arms, adjustable track bars, Johnny Joints, 4-link trusses and skid plates for Wrangler TJ/LJ, JK, JL and Gladiator JT. It's for Jeeps that commute all week and crawl on weekends.
Based in: Hamden, Connecticut · Made in: USA · Founded: 2001 · Lead time: Clayton in-stock: 1–3 business days; NVMOS stock: 24–48 hours
Shop all 583 Clayton Off RoadWarrantyAll brands
Warranty terms are set by Clayton Off Road, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
TeraFlex describes the OEM steering on the JL and JT as vague and unpredictable, and this package is built to tighten it up on both stock and lifted vehicles. It combines the TeraFlex HD forged drag link kit and HD chromoly tie rod kit with a matched steering stabilizer.
The drag link is a solid, fully forged 1.5" O.D. piece with an I-beam-inspired shape. TeraFlex says it is 100% stiffer than the factory drag link, uses an OEM-style turnbuckle adjuster, and has a black e-dip coating for corrosion resistance. The tie rod is 1-5/8" O.D. x 0.275" wall 4140 heat treated chromoly, described as more than 66% stronger and 75% stiffer than factory, adjustable from 59 to 61 inches, with a UV-protected triple-stage powder coat. One tie rod end is limited to 2 degrees of freedom to eliminate wobble and noise while the other has full motion for turning. The joints use a 4140 chromoly ball and stud in a 1045 carbon steel housing, with adjustable preload and a snap-ring retained design.
The stabilizer is a Falcon Nexus EF 2.2 Fast Adjust steering stabilizer, which gives a wide range of adjustability through a 3-position fast adjust knob. The tie rod kit relocates the stabilizer above the tie rod to help protect the stabilizer shaft and body.
Fitment
Jeep Wrangler JL (including Unlimited) and Gladiator JT models, stock or lifted.
What's included
The HD forged drag link kit, the HD chromoly tie rod kit and the Falcon Nexus EF 2.2 Fast Adjust stabilizer. Our source listing is cut off partway through the details, so ask us to confirm the complete parts list.
Install notes
The vendor text we received does not describe the install steps. The drag link uses an OEM-style turnbuckle for alignment adjustments.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Jeep Gladiator build
More parts that fit your Jeep Gladiator and pair well with this one — matched and ready to install.
$1,474.98
$149.00
$209.00
$279.00
$439.00
More for your Jeep Gladiator
Picked from the 712 parts we carry for the Jeep Gladiator. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
TeraFlex and Falcon Steering Package FAQs
Does this fit stock and lifted vehicles?
Yes. TeraFlex says the kits beef up steering on all JL and JT models, stock and lifted.
How adjustable is the tie rod?
The tie rod is adjustable in length from 59 to 61 inches.
What stabilizer comes with it?
A Falcon Nexus EF 2.2 Fast Adjust steering stabilizer.
What is the drag link made of and how is it finished?
It is a solid, fully forged 1.5 inch O.D. drag link with a black e-dip coating.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
