In-stock parts ship in 24–48 hours · Questions? Real humans: (920) 249-7744

Shop by Vehicle Pick your rig and see everything that fits
1
2
3
Browse popular rigs & all vehicles Hide vehicles
SKU: 1315560

TeraFlex Alpine Long Control Arm Kit, Rear Upper (3-6" Lift) - Jeep Wrangler JK 2007-2018

$363.99

180-Day ReturnsOn uninstalled, unused parts Real humans who wheel(920) 249-7744 PayPal Credit acceptedFinancing option at checkout Secure checkoutEncrypted payment
Confirmed fit: 2007–2018 Jeep Wrangler
Verified to fit the 2007–2018 Jeep Wrangler.
Warranty Information

Vendor warranty summary

TeraFlex Warranty

At a glance: Lifetime on suspension, steering and armor; 1 year on Falcon shocks and drivetrain; 90 days on finish

This is TeraFlex's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.

Coverage by product

Product or component Coverage
Suspension (coils, bump stops, control arms, track bars, sway bars/links, IR bushings) Lifetime
9550 shocks and stabilizer Lifetime
Steering and brakes (ball joints, tie rods, drag links, big brake kits, rotors, brake lines) Lifetime
Body armor (skids, racks, Alpha carrier, CB mounts) Lifetime
Wheels and adapters Lifetime
Delta Brake Kit 3 years
Falcon shocks (all series) 1 year
Axle assemblies, housings, knuckles, shafts, conversions 1 year
Alpine control arm and track bar bushings; driveshaft parts; transfer case kits 1 year
Recovery gear (straps, D-rings) 1 year
Paint and powder coat 90 days (defects only)
Wear items (brake pads, rotors) Not covered
  • Original purchaser only — coverage does not transfer if you sell it.
  • Keep your NVMOS order confirmation — proof of purchase is required.

What's covered

  • Defects in materials and workmanship
  • TeraFlex chooses to repair, replace or refund at no charge (except inbound shipping)
  • TeraFlex pays the freight to send the part back to you

What's not covered

  • Improper use, failure to follow instructions, or improper installation/maintenance
  • Modifications or unauthorized repair
  • Normal wear and tear, and finish beyond the 90-day term
  • Racing or competition use
  • Shipping/storage damage and other outside causes
  • Removal labor (customer's responsibility)

How to make a TeraFlex warranty claim

  • Call TeraFlex customer service, Mon-Fri 8am-5pm MST
  • Have proof of purchase or the original invoice ready
  • Remove the part and ship it in at your cost

TeraFlex contact: Phone: (801) 713-3314 · Claim page / support

Bought it from NVMOS? Start with us.

Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to TeraFlex, and help it along either way.

Shop TeraFlex at NVMOS

See all TeraFlex products, lead times and FAQs →

Disclaimer: The information on this page describes TeraFlex's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: TeraFlex official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.

About the brand

TeraFlex

TeraFlex has built Jeep suspension since 1996, works out of West Jordan, Utah, and now covers the Ford Bronco, Toyota Tacoma and Super Duty too. NVMOS carries TeraFlex lift kits, Falcon shocks, Alpine control arms, sway bars, ball joints, wheel adapters and Nomad and Olympus wheels. For Jeep and Bronco owners building for the trail.

Based in: West Jordan, Utah · Made in: USA (Utah) · Founded: 1996 (manufacturing) · Lead time: In-stock items ship in 24–48 hours

TeraFlex warranty: Lifetime on suspension, steering and armor; 1 year on Falcon shocks and drivetrain; 90 days on finish. Read the full summary

Warranty terms are set by TeraFlex, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.


This is the rear upper piece of TeraFlex's Alpine long control arm system for JK Wranglers and Unlimiteds running a 3-6" lift. The system is built to give complete alignment adjustability at those heights, and this upper arm is made from 42mm x 4mm wall DOM tube.

The arm uses maintenance-free, factory-style bushings that TeraFlex says give good noise, vibration and harshness damping and ride quality. It is meant to work with the Alpine Long Arm Brackets, which are gusseted and reinforced and which TeraFlex says carry less NVH than other long arm kits.

Fitment

2007-2018 Jeep Wrangler JK and JK Unlimited with a 3-6" lift. Because this listing covers the rear upper position only, order the remaining positions separately or step up to a full 8-arm kit if you are doing the whole system.

Install notes

This arm must be used with the TeraFlex Alpine Long Arm Bracket Kit (part 1957000), which is not included. Installation requires cutting and welding, including cutting or removing the factory control arm bracketry to fit the Alpine brackets. Budget for fab tools or a shop.

Questions before you order?

Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.

Finish the whole truck in one order

Complete your Jeep Wrangler build

More parts that fit your Jeep Wrangler and pair well with this one — matched and ready to install.

TeraFlex Alpine Long Control Arm Kit, Rear Upper (3-6" Lift) - Jeep Wrangler JK 2007-2018 (this item) What you’re viewing $363.99
✓ Morimoto 4Banger LED Fog Lights Jeep JL / JT Finish $444.00
Build total (1 items)
$363.99
The complete look for your Jeep Wrangler.
Set any options above, then add them all in one click — one checkout, one shipment.
Everything else that fits this truck

More for your Jeep Wrangler

Picked from the 2703 parts we carry for the Jeep Wrangler, matched to 2007–2018 model years. Check the years and trim in each title — or call us and we’ll confirm fit.

Shop all 2703 parts for your Jeep Wrangler →

Specifications

  • Part number: 1315560
  • Position: Rear Upper
  • Lift range: 3-6"
  • Tube: 42mm x 4mm wall DOM tube
  • Bushings: maintenance-free, factory-style
  • Required bracket kit: Alpine Long Arm Bracket Kit, part 1957000 (not included)
  • Install: requires cutting and welding
  • Fitment: Jeep Wrangler JK 2007-2018

TeraFlex Alpine Long Control Arm Kit, Rear Upper (3-6" Lift) FAQs

Do I need the bracket kit too?

Yes. TeraFlex states this arm must be used with the Alpine Long Arm Bracket Kit, part 1957000. It is not included with this listing.

Does installation require cutting and welding?

Yes. The factory control arm bracketry has to be cut or removed to install the Alpine brackets, and the new brackets are welded in.

What lift height is this designed for?

TeraFlex designs the Alpine long arm system for JK Wranglers and Unlimiteds with 3-6" lifts.

Is this the whole control arm set?

No. This listing is the rear upper arm kit only. The 8-arm kits and the arms-only kit are listed separately.

Multi-column

Minimalist icon of three people for social, community, or group activities
Join Our Community

For all things NVMOS, check us out on Instagram and Facebook!

Simple black and white credit card icon for payment or checkout options
Financing Available

Buy now, pay later with PayPal Credit — available at checkout.

black and white envelope mail icon for email or newsletter sign up
Contact Us

Have a question? Just send us an e-mail at support@nvmos.com