Tackform TF-BS-98-25 Low Profile Bar Mount - 7/8" to 1-1/4" Bars, 25.4mm Ball, Chrome
Warranty Information
Vendor warranty summary
Tackform Warranty
At a glance: Lifetime on metal parts, 3 years on plastic, 1 year on electronics
This is Tackform's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Metal parts | Lifetime |
| Plastic/ABS parts | 3 years |
| Electronics | 1 year |
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Tackform mounts and their parts bought from Tackform or an authorized reseller
- Only the defective component is replaced, not the whole system
What's not covered
- Devices you attach (phones, GPS units, tablets)
- Abuse, misuse or exposure to extreme temperatures
- Normal wear and tear
- Modified or improperly used mounts
- Discontinued parts with no available replacement
How to make a Tackform warranty claim
- Email clear photos of the mount and the failed area
- Explain how and when it failed
- Include proof of purchase (order number, Amazon order or receipt) and your shipping address
- A small shipping charge applies based on part weight; international customers pay all shipping
Tackform contact: Email: support@tackform.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Tackform, and help it along either way.
Shop Tackform at NVMOS
TRAXX™ - Accessory Track Dash Bracket With Dual MagSafe Phone Mount | 2014-2018 Chevrolet Silverado & GMC Sierra, 2015-2019 Silverado HD & Sierra HD
TRAXX™ -Accessory Track Dash Bracket With Dual MagSafe Phone Cradles | 2009-2012 RAM 1500 & 2500/3500
TRAXX - Slim Track Dash Bracket With 20LITE Phone & Midland Magnetic CB Radio Mic Mounts | 2016 - 2023 Toyota Tacoma
See all Tackform products, lead times and FAQs →
Disclaimer: The information on this page describes Tackform's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Tackform official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Tackform has built heavy-duty device mounts in Addison, Illinois since 2012. NVMOS carries their TRAXX dash brackets, 20 Series phone mounts (including MagSafe), tablet and monitor holders, CB mic holders, camera holders and bases for trucks, vans and off-road rigs where the phone needs to stay put.
Based in: Addison, Illinois · Founded: 2012 · Lead time: In-stock ships in 24–48 hrs
Shop all 1883 TackformWarrantyAll brands
Warranty terms are set by Tackform, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This is a slim bar clamp for the spots where a normal clamp will not fit. If cables or other clutter around your handlebar, grab bar or tube make it hard to get a thicker clamp around it, the low profile body gives you more room while keeping the same clamping hold. It is machined from 6061-T6 aluminum alloy and finished in chrome.
The clamp is sized for 7/8" to 1-1/4" bars and ships with rubber spacer inserts to take up the difference: 0.47" (12mm), 0.87" (22mm) and 1" (25.4mm). Without a spacer, the clamp bore is 1.25" (32mm).
It belongs to Tackform's 25 Series and works only with 25.4mm (1", B-sized) ball-and-socket parts. It will not work with 20mm metal balls. Tackform designs its 25 Series to uniform load standards. It says the parts are compatible with other 1" / 25.4mm / B-sized products but have tested durability and engineered load capacities, with a safety factor other manufacturers do not guarantee.
Fitment
Universal. It clamps round bars from 7/8" to 1-1/4" and is not tied to a make, model or year. Measure your bar and choose the right spacer before you tighten it down.
What's included
The listing describes the clamp base and its rubber spacers. Other mount components, arms and holders are separate.
Install notes
Pick the spacer that matches your bar diameter, or leave it out for the 1.25" bore. Only pair this with 25.4mm B-sized parts.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
Tackform TF-BS-98-25 Low Profile Bar Mount FAQs
Will it work with 20mm ball parts?
No. The listing says it works only with 25.4mm ball-and-socket parts and not with 20mm metal balls.
What bar sizes does it fit?
7/8" to 1-1/4", using the supplied rubber spacers. With no spacer the opening is 1.25" (32mm).
Why choose the low profile clamp?
It fits tight applications where cables or obstructions make a thicker clamp hard to wrap around the bar.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
