Tackform TF-AR-96-25 2.48" Double Socket Arm - 25.4mm B-Sized Ball, Black
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Tackform Warranty
At a glance: Lifetime on metal parts, 3 years on plastic, 1 year on electronics
This is Tackform's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Metal parts | Lifetime |
| Plastic/ABS parts | 3 years |
| Electronics | 1 year |
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Tackform mounts and their parts bought from Tackform or an authorized reseller
- Only the defective component is replaced, not the whole system
What's not covered
- Devices you attach (phones, GPS units, tablets)
- Abuse, misuse or exposure to extreme temperatures
- Normal wear and tear
- Modified or improperly used mounts
- Discontinued parts with no available replacement
How to make a Tackform warranty claim
- Email clear photos of the mount and the failed area
- Explain how and when it failed
- Include proof of purchase (order number, Amazon order or receipt) and your shipping address
- A small shipping charge applies based on part weight; international customers pay all shipping
Tackform contact: Email: support@tackform.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Tackform, and help it along either way.
Shop Tackform at NVMOS
TRAXX™ - Accessory Track Dash Bracket With Dual MagSafe Phone Mount | 2014-2018 Chevrolet Silverado & GMC Sierra, 2015-2019 Silverado HD & Sierra HD
TRAXX™ -Accessory Track Dash Bracket With Dual MagSafe Phone Cradles | 2009-2012 RAM 1500 & 2500/3500
TRAXX - Slim Track Dash Bracket With 20LITE Phone & Midland Magnetic CB Radio Mic Mounts | 2016 - 2023 Toyota Tacoma
See all Tackform products, lead times and FAQs →
Disclaimer: The information on this page describes Tackform's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Tackform official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Tackform (often typed as Trackform) has built heavy-duty device mounts in Addison, Illinois since 2012. NVMOS carries their TRAXX dash brackets, 20 Series phone mounts (including MagSafe), tablet and monitor holders, CB mic holders, camera holders and bases for trucks, vans and off-road rigs where the phone needs to stay put.
Based in: Addison, Illinois · Founded: 2012 · Lead time: In-stock ships in 24–48 hrs
Shop all 1901 TackformWarrantyAll brands
Warranty terms are set by Tackform, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This is a double socket arm from Tackform's 25 Series. It is machined from hard anodized 6061-T6 billet aluminum, 2.48" long overall, with a center-to-center ball span of 1.54". It connects two 25.4mm (1", B-sized) rubber ball parts, so you can set a device back from the base and angle it where you want it.
Tackform optimizes it for rigorous off-road use and rates it as best suited to devices under 2 lbs, such as cell phones, action cameras, tablets, tuners and similar small electronics. It recommends pairing it with other 25 Series parts. Tackform designs its 25 Series to uniform load standards. It says the parts are compatible with other 1" / 25.4mm / B-sized products but have tested durability and engineered load capacities, with a safety factor other manufacturers do not guarantee.
Compatibility note: it is not compatible with 20mm ball-and-socket parts or 1.5" C-sized balls.
Fitment
Universal. The arm fits any 1" / 25.4mm / B-sized rubber ball-and-socket system, so it is chosen by ball size rather than vehicle.
What's included
The arm only. Bases, holders and other parts are sold separately.
Install notes
Keep the load under 2 lbs. Match it to 25.4mm B-sized parts; it will not mate with 20mm or 1.5" C-sized balls.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text us at (920) 249-7744.
Specifications
Tackform TF-AR-96-25 2.48" Double Socket Arm FAQs
How much weight can it hold?
Tackform says it is best suited to devices weighing less than 2 lbs, such as phones, action cameras, tablets and tuners.
Does it fit 20mm mounts?
No. It is not compatible with 20mm ball-and-socket parts or 1.5" C-sized balls.
How long is the arm?
2.48" overall, with 1.54" between the ball centers.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
