Tackform SLATE Tablet Cradle - All-Metal, Spring Loaded Grip, 20mm Ball
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Tackform Warranty
At a glance: Lifetime on metal parts, 3 years on plastic, 1 year on electronics
This is Tackform's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Metal parts | Lifetime |
| Plastic/ABS parts | 3 years |
| Electronics | 1 year |
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Tackform mounts and their parts bought from Tackform or an authorized reseller
- Only the defective component is replaced, not the whole system
What's not covered
- Devices you attach (phones, GPS units, tablets)
- Abuse, misuse or exposure to extreme temperatures
- Normal wear and tear
- Modified or improperly used mounts
- Discontinued parts with no available replacement
How to make a Tackform warranty claim
- Email clear photos of the mount and the failed area
- Explain how and when it failed
- Include proof of purchase (order number, Amazon order or receipt) and your shipping address
- A small shipping charge applies based on part weight; international customers pay all shipping
Tackform contact: Email: support@tackform.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Tackform, and help it along either way.
Shop Tackform at NVMOS
TRAXX™ - Accessory Track Dash Bracket With Dual MagSafe Phone Mount | 2014-2018 Chevrolet Silverado & GMC Sierra, 2015-2019 Silverado HD & Sierra HD
TRAXX™ -Accessory Track Dash Bracket With Dual MagSafe Phone Cradles | 2009-2012 RAM 1500 & 2500/3500
TRAXX - Slim Track Dash Bracket With 20LITE Phone & Midland Magnetic CB Radio Mic Mounts | 2016 - 2023 Toyota Tacoma
See all Tackform products, lead times and FAQs →
Disclaimer: The information on this page describes Tackform's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Tackform official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Tackform (often typed as Trackform) has built heavy-duty device mounts in Addison, Illinois since 2012. NVMOS carries their TRAXX dash brackets, 20 Series phone mounts (including MagSafe), tablet and monitor holders, CB mic holders, camera holders and bases for trucks, vans and off-road rigs where the phone needs to stay put.
Based in: Addison, Illinois · Founded: 2012 · Lead time: In-stock ships in 24–48 hrs
Shop all 1901 TackformWarrantyAll brands
Warranty terms are set by Tackform, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The SLATE is Tackform's all-metal tablet cradle for the 20mm ball system. A heavy internal spring keeps tension on the tablet, and the grips adjust to fit devices with or without a case. Insertion and removal is a one-handed job, and the cradle works in portrait or landscape.
Tablets from 6" to 16" (measured diagonally) fit, including Samsung Galaxy models and iPads. The spring cradle opens from 5.25" to 10.25" in height; if your tablet is taller than that, mount it horizontally and rotate for a diagonal view. The grips hold device depths from 0.18" to 1.5", so slim cases, rugged cases and cases with rear hand straps are all in play. Soft rubber padding on the grips protects the finish.
Small details help in a vehicle: rubber channels route a charging cable, a rubber stylus holder keeps the stylus handy, and an adjustable support leg fine-tunes height and position. An aluminum AMPS ball mount is included, and the rear of the cradle has several adjustable mounting locations for it.
Fitment
Universal. It is built for Tackform's 20 Series (20mm ball). The Samsung Galaxy View is not compatible.
What's included
SLATE cradle with the aluminum AMPS ball mount.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text us at (920) 249-7744.
Specifications
Tackform SLATE Tablet Cradle FAQs
Will my iPad or Galaxy tablet fit?
Samsung Galaxy and iPad models with screens from 6" to 16" fit. The Galaxy View is the one exception and is not compatible.
Can I leave my case on?
Yes. The grips adjust for devices from 0.18" to 1.5" deep, which covers uncased tablets, slim and rugged cases, and cases with rear hand straps.
What if my tablet is taller than 10.25"?
Mount it horizontally in the grips and rotate it to get a diagonal view.
Does it come with a ball mount?
Yes, an aluminum AMPS ball mount is included. The rear of the cradle has adjustable mounting locations for it.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
