Tackform Magnetic Adapter for GME XRS Handheld Radios
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Tackform Warranty
At a glance: Lifetime on metal parts, 3 years on plastic, 1 year on electronics
This is Tackform's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Metal parts | Lifetime |
| Plastic/ABS parts | 3 years |
| Electronics | 1 year |
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Tackform mounts and their parts bought from Tackform or an authorized reseller
- Only the defective component is replaced, not the whole system
What's not covered
- Devices you attach (phones, GPS units, tablets)
- Abuse, misuse or exposure to extreme temperatures
- Normal wear and tear
- Modified or improperly used mounts
- Discontinued parts with no available replacement
How to make a Tackform warranty claim
- Email clear photos of the mount and the failed area
- Explain how and when it failed
- Include proof of purchase (order number, Amazon order or receipt) and your shipping address
- A small shipping charge applies based on part weight; international customers pay all shipping
Tackform contact: Email: support@tackform.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Tackform, and help it along either way.
Shop Tackform at NVMOS
TRAXX™ - Accessory Track Dash Bracket With Dual MagSafe Phone Mount | 2014-2018 Chevrolet Silverado & GMC Sierra, 2015-2019 Silverado HD & Sierra HD
TRAXX™ -Accessory Track Dash Bracket With Dual MagSafe Phone Cradles | 2009-2012 RAM 1500 & 2500/3500
TRAXX - Slim Track Dash Bracket With 20LITE Phone & Midland Magnetic CB Radio Mic Mounts | 2016 - 2023 Toyota Tacoma
See all Tackform products, lead times and FAQs →
Disclaimer: The information on this page describes Tackform's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Tackform official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Tackform (often typed as Trackform) has built heavy-duty device mounts in Addison, Illinois since 2012. NVMOS carries their TRAXX dash brackets, 20 Series phone mounts (including MagSafe), tablet and monitor holders, CB mic holders, camera holders and bases for trucks, vans and off-road rigs where the phone needs to stay put.
Based in: Addison, Illinois · Founded: 2012 · Lead time: In-stock ships in 24–48 hrs
Shop all 1901 TackformWarrantyAll brands
Warranty terms are set by Tackform, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This is the radio-side half of Tackform's magnetic mounting system, made for the GME XRS handheld GMRS radio. It replaces the factory belt clip on the back of the radio with a magnetic mounting point. Pair it with a Tackform magnetic receiver in the vehicle and the radio docks with a magnetic snap and pulls off with one hand, which beats fishing a radio out of a cupholder or door pocket.
The adapter is part of Tackform's 20 Series platform, which is built around a 20mm ball and socket. That means the receiver you pair it with can sit on a Tackform dash mount, grab handle mount, track base or bar clamp, and Tackform says the system plays with other 20mm products as well. Tackform also says it tests its parts for durability and engineers load capacities with a safety factor, though it does not publish the numbers.
If you already own a Tackform magnetic receiver from another radio or mic setup, this adapter is all you need to bring a GME XRS into the same system. If you are starting from scratch, the bundle version adds the receiver with a 20mm ball.
Fitment
Not universal in the radio sense. It is made only for the GME XRS handheld GMRS radio. No vehicle fitment applies; where it ends up depends on the receiver and mount you pair it with.
Install notes
Remove the GME's stock belt clip and fit the adapter in its place. The magnetic receiver is sold separately, so budget for one if you do not already have it.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text us at (920) 249-7744.
Technical specifications
| GME | XRS Handheld GMRS Radio |
|---|
Tackform Magnetic Adapter for GME XRS Handheld Radios FAQs
Does it fit other GME or Midland radios?
No. Tackform lists it only for the GME XRS handheld GMRS radio. Tackform makes separate adapters for Midland, Cobra and universal radios.
Is the magnetic receiver included?
No. The receiver is sold separately, or buy the bundle that includes it with a 20mm ball.
How does it attach to the radio?
It replaces the radio's factory belt clip.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
