Tackform Grab Handle Bar Clamp with 1/4"-20 Camera Mount - 1" to 2" Bars
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Tackform Warranty
At a glance: Lifetime on metal parts, 3 years on plastic, 1 year on electronics
This is Tackform's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Metal parts | Lifetime |
| Plastic/ABS parts | 3 years |
| Electronics | 1 year |
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Tackform mounts and their parts bought from Tackform or an authorized reseller
- Only the defective component is replaced, not the whole system
What's not covered
- Devices you attach (phones, GPS units, tablets)
- Abuse, misuse or exposure to extreme temperatures
- Normal wear and tear
- Modified or improperly used mounts
- Discontinued parts with no available replacement
How to make a Tackform warranty claim
- Email clear photos of the mount and the failed area
- Explain how and when it failed
- Include proof of purchase (order number, Amazon order or receipt) and your shipping address
- A small shipping charge applies based on part weight; international customers pay all shipping
Tackform contact: Email: support@tackform.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Tackform, and help it along either way.
Shop Tackform at NVMOS
TRAXX™ - Accessory Track Dash Bracket With Dual MagSafe Phone Mount | 2014-2018 Chevrolet Silverado & GMC Sierra, 2015-2019 Silverado HD & Sierra HD
TRAXX™ -Accessory Track Dash Bracket With Dual MagSafe Phone Cradles | 2009-2012 RAM 1500 & 2500/3500
TRAXX - Slim Track Dash Bracket With 20LITE Phone & Midland Magnetic CB Radio Mic Mounts | 2016 - 2023 Toyota Tacoma
See all Tackform products, lead times and FAQs →
Disclaimer: The information on this page describes Tackform's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Tackform official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Tackform (often typed as Trackform) has built heavy-duty device mounts in Addison, Illinois since 2012. NVMOS carries their TRAXX dash brackets, 20 Series phone mounts (including MagSafe), tablet and monitor holders, CB mic holders, camera holders and bases for trucks, vans and off-road rigs where the phone needs to stay put.
Based in: Addison, Illinois · Founded: 2012 · Lead time: In-stock ships in 24–48 hrs
Shop all 1901 TackformWarrantyAll brands
Warranty terms are set by Tackform, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This clamp holds a camera on a round bar using the standard 1/4"-20 tripod thread. It is a billet aluminum bar clamp with an aluminum tightening ring, and it is tool-free to set up. Tackform's pitch is vloggers, car reviews and dashcam alternatives, but anything with a tripod socket will do.
The clamp opens to fit bars from 1" to 2", which covers common round stock on motorcycles, semi truck grab handles, roll cages and harness bars. It is CNC-machined 6061-T6 billet aluminum. The knob is glass-filled resin with a stainless steel threaded core, the grips are anti-slip rubber, and the hardware is stainless steel. Like the rest of the family it uses Tackform's Type-B interface, with a single 20mm ball and four connection points in total, so you can relocate the ball on the clamp.
Fitment
Not tied to a vehicle. It fits round bars from 1" to 2" and any camera or device with a 1/4"-20 mount. Eight accent kit colors are offered. Tackform notes that it is not suitable for 25.4mm / 1" / B-sized balls, so it will not take those components.
Install notes
The tightening ring is hand-operated, so no tools are needed.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text us at (920) 249-7744.
Specifications
Tackform Grab Handle Bar Clamp with 1/4"-20 Camera Mount FAQs
What does the camera attach with?
A standard 1/4-inch-20 tripod screw.
Do I need tools?
No. It uses an aluminum tightening ring for hand-tight mounting.
What bars will it clamp?
Round bars from 1 to 2 inches.
Will it take 1-inch B-sized balls?
No, Tackform says it is not suitable for 25.4mm / 1 inch / B-sized balls.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
