Tackform Enduro Series Phone Cradles for 25 Series 1" B-Size Ball - 25LITE, 25MAXX, 25MAXX VIBE
Warranty Information
Vendor warranty summary
Tackform Warranty
At a glance: Lifetime on metal parts, 3 years on plastic, 1 year on electronics
This is Tackform's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Metal parts | Lifetime |
| Plastic/ABS parts | 3 years |
| Electronics | 1 year |
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Tackform mounts and their parts bought from Tackform or an authorized reseller
- Only the defective component is replaced, not the whole system
What's not covered
- Devices you attach (phones, GPS units, tablets)
- Abuse, misuse or exposure to extreme temperatures
- Normal wear and tear
- Modified or improperly used mounts
- Discontinued parts with no available replacement
How to make a Tackform warranty claim
- Email clear photos of the mount and the failed area
- Explain how and when it failed
- Include proof of purchase (order number, Amazon order or receipt) and your shipping address
- A small shipping charge applies based on part weight; international customers pay all shipping
Tackform contact: Email: support@tackform.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Tackform, and help it along either way.
Shop Tackform at NVMOS
TRAXX™ - Accessory Track Dash Bracket With Dual MagSafe Phone Mount | 2014-2018 Chevrolet Silverado & GMC Sierra, 2015-2019 Silverado HD & Sierra HD
TRAXX™ -Accessory Track Dash Bracket With Dual MagSafe Phone Cradles | 2009-2012 RAM 1500 & 2500/3500
TRAXX - Slim Track Dash Bracket With 20LITE Phone & Midland Magnetic CB Radio Mic Mounts | 2016 - 2023 Toyota Tacoma
See all Tackform products, lead times and FAQs →
Disclaimer: The information on this page describes Tackform's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Tackform official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Tackform has built heavy-duty device mounts in Addison, Illinois since 2012. NVMOS carries their TRAXX dash brackets, 20 Series phone mounts (including MagSafe), tablet and monitor holders, CB mic holders, camera holders and bases for trucks, vans and off-road rigs where the phone needs to stay put.
Based in: Addison, Illinois · Founded: 2012 · Lead time: In-stock ships in 24–48 hrs
Shop all 1883 TackformWarrantyAll brands
Warranty terms are set by Tackform, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This Enduro Series cradle is the 1" (25.4mm, B-size) version of Tackform's phone holder. It comes as the 25LITE, 25MAXX or 25MAXX VIBE and fits phones 2.4" to 3.7" wide and up to 0.6" deep. It is CNC machined aluminum with a spring-loaded design and clip-in rubber grips that have a button cutout.
The pins are sleeved to eliminate the buzz that metal-on-metal contact can cause under vibration. The 25LITE has standard spring tension for in-vehicle, semi-truck and light off-road use, allows one-handed insertion and removal, and suits any arm length. The 25MAXX has heavy spring tension for extreme off-road and open-top driving. The 25MAXX VIBE adds vibration dampening and is engineered for motorcycles and side-by-sides. Tackform does not recommend the MAXX versions on arms over 3.5", because the heavy spring can make the ball joint slip when you insert a phone with one hand.
Fitment
Universal, for 1", 25.4mm, B-size ball-and-socket parts. For 20mm systems, use the 20 Series Enduro cradle.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
Tackform Enduro Series Phone Cradles for 25 Series 1" B-Size Ball FAQs
Is this for 20mm balls?
No. This is the 1" / 25.4mm B-size version.
Which version should I get?
LITE suits in-vehicle and light off-road use. MAXX is heavier tension for extreme off-road. MAXX VIBE adds dampening for motorcycles and side-by-sides.
Can I use a MAXX on a long arm?
Tackform does not recommend arms over 3.5". It can be done if you hold the arm while inserting the phone.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
