Tackform BC415 Semi Truck Grab Handle Phone Mount with 3.5" Arm - Fits 7/8" to 1-1/2" Bars
Warranty Information
Vendor warranty summary
Tackform Warranty
At a glance: Lifetime on metal parts, 3 years on plastic, 1 year on electronics
This is Tackform's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Metal parts | Lifetime |
| Plastic/ABS parts | 3 years |
| Electronics | 1 year |
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Tackform mounts and their parts bought from Tackform or an authorized reseller
- Only the defective component is replaced, not the whole system
What's not covered
- Devices you attach (phones, GPS units, tablets)
- Abuse, misuse or exposure to extreme temperatures
- Normal wear and tear
- Modified or improperly used mounts
- Discontinued parts with no available replacement
How to make a Tackform warranty claim
- Email clear photos of the mount and the failed area
- Explain how and when it failed
- Include proof of purchase (order number, Amazon order or receipt) and your shipping address
- A small shipping charge applies based on part weight; international customers pay all shipping
Tackform contact: Email: support@tackform.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Tackform, and help it along either way.
Shop Tackform at NVMOS
TRAXX™ - Accessory Track Dash Bracket With Dual MagSafe Phone Mount | 2014-2018 Chevrolet Silverado & GMC Sierra, 2015-2019 Silverado HD & Sierra HD
TRAXX™ -Accessory Track Dash Bracket With Dual MagSafe Phone Cradles | 2009-2012 RAM 1500 & 2500/3500
TRAXX - Slim Track Dash Bracket With 20LITE Phone & Midland Magnetic CB Radio Mic Mounts | 2016 - 2023 Toyota Tacoma
See all Tackform products, lead times and FAQs →
Disclaimer: The information on this page describes Tackform's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Tackform official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Tackform has built heavy-duty device mounts in Addison, Illinois since 2012. NVMOS carries their TRAXX dash brackets, 20 Series phone mounts (including MagSafe), tablet and monitor holders, CB mic holders, camera holders and bases for trucks, vans and off-road rigs where the phone needs to stay put.
Based in: Addison, Illinois · Founded: 2012 · Lead time: In-stock ships in 24–48 hrs
Shop all 1883 TackformWarrantyAll brands
Warranty terms are set by Tackform, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This Tackform BC415 clamp mounts a phone to a semi-truck grab handle, which is often a better place for a screen than the dash. It clamps round bars from 7/8" up to 1-1/2", which the vendor says covers common stock for grab handles, roll cages and harness bars. A 3.5" fully articulating dual socket ball arm lets you aim the device.
The cradle is built for nearly all smartphones, with or without a case, up to 3.7" wide and 0.6" thick. Its octagon-shaped grips pull the phone away from the cradle back to limit heat transfer on hot days, and the injection-molded grips clip in and can be replaced, with no reliance on 3M tape. The spring is calibrated for vehicles so a phone goes in and out without straining the mount base.
The clamp has four Type-B connection points and ships with a single 20mm ball, so you can relocate the ball to suit your install. Extra components come in the box to convert the kit to a short reach configuration. It is part of the Tackform 20 Series, built around the 20mm ball and socket.
Fitment
Universal. Round bars from 7/8" to 1-1/2" in diameter. Colors listed: black, blue, green, orange, pink, purple, red, yellow.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
Tackform BC415 Semi Truck Grab Handle Phone Mount with 3.5" Arm FAQs
What bar sizes will it clamp?
Round bars from 7/8 inch up to 1-1/2 inches in diameter.
What phones does it hold?
Nearly all smartphones, with or without a case, up to 3.7 inches wide and 0.6 inches thick. Check your phone against those numbers.
Are the grips tape-on?
No. They are clip-in and replaceable, not dependent on 3M tape.
Can I shorten the reach?
Yes. The kit includes additional components to convert it to a short reach configuration.
What colors are available?
Black, blue, green, orange, pink, purple, red and yellow.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
