Tackform BC1 Chrome Bar Clamp - 25.4mm B-Sized Rubber Ball, 3/4" to 2" Bars
Warranty Information
Vendor warranty summary
Tackform Warranty
At a glance: Lifetime on metal parts, 3 years on plastic, 1 year on electronics
This is Tackform's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Metal parts | Lifetime |
| Plastic/ABS parts | 3 years |
| Electronics | 1 year |
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Tackform mounts and their parts bought from Tackform or an authorized reseller
- Only the defective component is replaced, not the whole system
What's not covered
- Devices you attach (phones, GPS units, tablets)
- Abuse, misuse or exposure to extreme temperatures
- Normal wear and tear
- Modified or improperly used mounts
- Discontinued parts with no available replacement
How to make a Tackform warranty claim
- Email clear photos of the mount and the failed area
- Explain how and when it failed
- Include proof of purchase (order number, Amazon order or receipt) and your shipping address
- A small shipping charge applies based on part weight; international customers pay all shipping
Tackform contact: Email: support@tackform.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Tackform, and help it along either way.
Shop Tackform at NVMOS
TRAXX™ - Accessory Track Dash Bracket With Dual MagSafe Phone Mount | 2014-2018 Chevrolet Silverado & GMC Sierra, 2015-2019 Silverado HD & Sierra HD
TRAXX™ -Accessory Track Dash Bracket With Dual MagSafe Phone Cradles | 2009-2012 RAM 1500 & 2500/3500
TRAXX - Slim Track Dash Bracket With 20LITE Phone & Midland Magnetic CB Radio Mic Mounts | 2016 - 2023 Toyota Tacoma
See all Tackform products, lead times and FAQs →
Disclaimer: The information on this page describes Tackform's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Tackform official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Tackform has built heavy-duty device mounts in Addison, Illinois since 2012. NVMOS carries their TRAXX dash brackets, 20 Series phone mounts (including MagSafe), tablet and monitor holders, CB mic holders, camera holders and bases for trucks, vans and off-road rigs where the phone needs to stay put.
Based in: Addison, Illinois · Founded: 2012 · Lead time: In-stock ships in 24–48 hrs
Shop all 1883 TackformWarrantyAll brands
Warranty terms are set by Tackform, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The BC1 is a fixed, size-specific bar clamp for people who do not plan to keep taking their mount on and off. Instead of a universal clamp that adapts to anything, it is sized to your exact bar, which makes for a cleaner and tighter result. Tackform lists it for motorcycles, roll cages, harness bars and similar round bars, in a chrome finish. The ball is a 25.4mm (1", B-sized) rubber ball, part of the 25 Series.
Measuring is the step that matters here. Choose the bar size from the drop-down: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-3/4", 1.85" or 2". If you would rather measure with a paper strip, wrap it around the bar and compare to Tackform's circumference chart: 7/8" is 2-3/4", 1" is 3-1/8", 1.25" is 4", 1.5" is 4-3/4", 1.75" is 5-1/2" and 2" is 6-1/4". Those are rounded to the nearest 1/8".
Fitment
Universal across any vehicle with a round bar in the sizes above. It is chosen by bar diameter, not by make, model or year.
What's included
One bar clamp in the size you select, with the 25.4mm rubber ball. Arms and holders are separate.
Install notes
Measure twice before ordering. If you are not sure of your bar size, call us and we will help you confirm it.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
Tackform BC1 Chrome Bar Clamp FAQs
How do I choose the right size?
Measure the bar diameter, or wrap a paper strip around it and match the circumference to Tackform's chart. If unsure, contact us before ordering.
What bars does it fit?
Round bars from 3/4" to 2" in the listed sizes, including motorcycle bars, roll cages and harness bars.
Can I move it between bars?
It is sized to one bar diameter, so it suits a mount you do not plan to remove often.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
