RCI Transfer Case Skid Plate - 2009-2014 F-150
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
The transfer case on a 4x4 F-150 sits low and exposed, along with the vacuum pump. This RCI skid plate covers both with a smooth, flat steel surface that slides over obstacles instead of catching on them. The steel version is finished in black powder coat to resist rust. Made in the USA.
It is meant to round out the underbody protection on the truck, and RCI describes it as compatible with all 4x4 trucks on the 2009-present chassis, including EcoBoost and Raptor models.
Highlights: Protects the transfer case and vacuum pump; Smooth, flat surface slides over obstacles; Black powder coated steel resists rust; Bolts to factory attachment points, no drilling; Made in the USA with hardware included.
Fitment
This listing is for the 2009-2014 Ford F-150, 4x4 trucks only.
What's included
The skid plate, all hardware and installation instructions.
Install notes
Direct bolt-on to existing factory attachment points with no drilling. RCI says it installs in minutes. Shipping weight is 19 lb.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your F-150 build
More parts that fit your F-150 and pair well with this one — matched and ready to install.
$229.00
$85.99
$85.99
$85.99
$85.99
More for your Ford F-150
Picked from the 592 parts we carry for the Ford F-150, matched to 2009–2014 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
RCI Transfer Case Skid Plate FAQs
Does it fit EcoBoost or Raptor trucks?
RCI states it is compatible with all 4x4 trucks on the 09-present chassis, including EcoBoost and Raptor. This listing covers the 2009-2014 years.
Is it for 2WD trucks?
No. It covers the transfer case, so it is for 4x4 models.
Do I have to drill?
No. It uses the existing factory attachment points.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
