RCI Rock Sliders - 2020+ Jeep Gladiator JT
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
These RCI sliders protect the rocker panels and doors on the Gladiator with a 2" square main tube, which RCI says is much stronger than the 1.75" round tube many competitors use, plus 1.75" DOM outer rails as standard. Gussets are 1/4" thick on all legs, and the mitered end caps are laser-cut and bent 3/16" steel. A full-length 3/16" frame plate and support legs tie them to the truck. RCI says one side can support the whole truck for a Hi-Lift or sliding on rocks. Made in the USA. This item is made to order and ships on a lead time; RCI posts current lead times on its site.
Pick a slider angle of 5, 20 (standard) or 45 degrees, in bare metal or satin black powdercoat over epoxy primer. A bolt-on tread plate is available for the 5 and 20 degree versions, for a dimpled step surface that adds grip and protects the rocker from debris; RCI recommends 5 degrees if you want a flatter step. RCI's low-profile rear kick-out is standard.
Fitment
Fits the 2020 to present Jeep Gladiator JT. RCI also suggests adding pinch seam covers for a finished look on the rocker panel.
Install notes
Direct bolt-on to existing factory attachment points with no drilling, and it installs in minutes with basic hand tools. They can also be welded to the frame if you prefer. All hardware is provided.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Jeep Gladiator build
More parts that fit your Jeep Gladiator and pair well with this one — matched and ready to install.
$1,229.00
$179.00
$195.00
$1,099.00
$999.00
More for your Jeep Gladiator
Picked from the 754 parts we carry for the Jeep Gladiator, matched to 2020+ model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
RCI Rock Sliders FAQs
Which angle should I pick?
20 degrees is standard. RCI recommends 5 degrees if you add the tread plate and want a flatter step surface. 45 degrees is available without a tread plate.
Can I add a tread plate?
Yes, a bolt-on tread plate is available on the 5 and 20 degree models.
Do I need to drill?
No. They bolt to existing factory attachment points, or can be welded to the frame if desired.
Is there a lead time?
Yes, they are made to order.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
