RCI Low-Pro Rock Rails - 2010-2024 Toyota 4Runner
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
About the brand
RCI Metalworks builds skid plates, rock sliders, bumpers and racks in Loveland, Colorado, doing the cutting, bending, welding and powder coat in-house. NVMOS carries the RCI lineup for Toyota 4Runner, Tacoma, Tundra and Land Cruiser, Lexus GX, Ford Bronco, Ranger and F-150, Jeep Wrangler JL and more. Steel or aluminum, coated or bare.
Based in: Loveland, Colorado · Made in: USA (built in-house in Colorado) · Lead time: Built to order, about 1–6 weeks by category
Shop all 518 RCI MetalworksWarrantyLead timesAll brands
Warranty terms are set by RCI Metalworks, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The Low-Pro Rock Rails are a slimmer take on RCI's slider for the 5th generation 4Runner. They protect the pinch seam and give moderate protection to the rocker panel, and they clean up the look of the open rocker area along the side of the truck.
Each rail mounts to the frame through full-length 1/4" plates with up to 15 mounting points. The main tube is 2" square with 1/4" leg gussets, and the standard angle is 5 degrees for a low profile with maximum ground clearance. RCI says they can support the entire side of the truck for lifting or sliding on rocks, and they can serve as a side jack point for a floor jack. They work with both KDSS and non-KDSS trucks. The finish is a black textured powdercoat over epoxy primer. Built in the USA.
Options
Choose satin black powdercoat or bare metal.
Fitment
Listed for the 2010-2024 Toyota 4Runner. They are not compatible with the Limited unless you remove or cut the plastic rocker trim, and they do not work with XREAS-equipped models.
Lead time
Made to order, so this ships on a lead time. RCI posts current lead times on its site, and we can check the current wait for you.
Install notes
Direct frame bolt-on to existing mounting locations with no drilling, using basic hand tools. Grade 5 and 8 hardware is provided where applicable.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Toyota 4Runner build
More parts that fit your Toyota 4Runner and pair well with this one — matched and ready to install.
$899.00
$20.70
$82.80
$16.00
$95.00
More for your Toyota 4Runner
Picked from the 1199 parts we carry for the Toyota 4Runner, matched to 2010–2024 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
RCI Low-Pro Rock Rails FAQs
How are these different from the full rock sliders?
They are a lower-profile rail that protects the pinch seam and gives moderate rocker panel protection, rather than the full-height armor of the standard slider.
Do they work with KDSS?
Yes, they are fully compatible with both KDSS and non-KDSS trucks.
Will they fit a Limited?
Not without removing or cutting the plastic rocker trim. They also do not work with XREAS models.
Can I jack from them?
RCI says they can be used as a jack point from the side with a floor jack.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
