RCI Interior Side Molle Panel - 2010-2024 Toyota 4Runner
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
About the brand
RCI Metalworks builds skid plates, rock sliders, bumpers and racks in Loveland, Colorado, doing the cutting, bending, welding and powder coat in-house. NVMOS carries the RCI lineup for Toyota 4Runner, Tacoma, Tundra and Land Cruiser, Lexus GX, Ford Bronco, Ranger and F-150, Jeep Wrangler JL and more. Steel or aluminum, coated or bare.
Based in: Loveland, Colorado · Made in: USA (built in-house in Colorado) · Lead time: Built to order, about 1–6 weeks by category
Shop all 518 RCI MetalworksWarrantyLead timesAll brands
Warranty terms are set by RCI Metalworks, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
These interior side panels turn the dead space beside the rear windows of a 5th-gen 4Runner into usable mounting space. RCI laser cuts them from 12-gauge steel, adds MOLLE cutouts for pouches and organizers, and slots the plate for RotoPax mounts, shovel or axe brackets and similar gear. A black powder coat guards against corrosion, and there is a bottle opener built into the panel, which is a small touch we like. The panels follow the window opening closely so they give up very little cargo room, and the pair weighs 15.5 lb.
Fitment
Built for the 2010-2024 Toyota 4Runner. RCI has physically confirmed the fit on a 2010 Limited and suspects it works on every trim from 2010 on. If you drive a different trim and want certainty before ordering, call us and we will help sort it out. The panels bolt to existing locations in the vehicle.
What's included
One driver-side and one passenger-side panel (sold as a pair) and all of the hardware needed for installation.
Install notes
This is a direct bolt-on to factory locations, and RCI publishes an installation guide for it. The panel is made to order, so it ships on a lead time instead of straight off the shelf. RCI keeps a current lead time page, and we can tell you where it stands when you order.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Toyota 4Runner build
More parts that fit your Toyota 4Runner and pair well with this one — matched and ready to install.
$296.00
$20.70
$82.80
$16.00
$95.00
More for your Toyota 4Runner
Picked from the 1199 parts we carry for the Toyota 4Runner, matched to 2010–2024 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
RCI Interior Side Molle Panel FAQs
Will this fit my 4Runner trim?
RCI confirmed the fit on a 2010 Limited and suspects all 2010 and newer 4Runner trims work. Call us if you want to double check your specific trim.
Are the panels sold as a pair?
Yes. One order includes the driver and passenger panels.
Do I need to drill anything?
No. The panels bolt directly to existing locations in the vehicle, and the hardware is included.
Is it in stock?
It is made to order and ships on a lead time. Ask us for the current wait when you order.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
