RCI Ascent Roof Rack - 2024+ Land Cruiser
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
About the brand
RCI Metalworks builds skid plates, rock sliders, bumpers and racks in Loveland, Colorado, doing the cutting, bending, welding and powder coat in-house. NVMOS carries the RCI lineup for Toyota 4Runner, Tacoma, Tundra and Land Cruiser, Lexus GX, Ford Bronco, Ranger and F-150, Jeep Wrangler JL and more. Steel or aluminum, coated or bare.
Based in: Loveland, Colorado · Made in: USA (built in-house in Colorado) · Lead time: Built to order, about 1–6 weeks by category
Shop all 518 RCI MetalworksWarrantyLead timesAll brands
Warranty terms are set by RCI Metalworks, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The Ascent is RCI's roof rack for the 2024-present Land Cruiser. It mounts lights, Hi-Lift jacks, rooftop tents, shower systems, traction boards, Quick Fist mounts, RotoPax, spare tires, bike mounts and roof baskets, and it is engineered to carry heavy gear including rooftop tents.
Side panels and the rear fairing are 1/4" 5052 aluminum, laser cut, with 1" x 2" black anodized aluminum T-slot cross bars and a 1/8" 5052 front fairing that follows the roof and windshield. All aluminum is CNC deburred. T-slots accept nut plates and carriage bolts, side panel slots take handles, side lighting and awning mounts, and injection-molded rubber blocks cushion the feet and seal out moisture without silicone. Made in the USA.
Fitment
2024-present Toyota Land Cruiser. It bolts to the existing roof rack mounting holes and does not require removing or altering the roof antenna. The rack sits 1.75" above the highest point of the vehicle, not counting the antenna.
What's included
Rubber trim, black stainless steel hardware and all needed installation hardware and instructions.
Install notes
Bolt-together assembly takes about 45 minutes. The rack weighs about 62 lb; shipping weight is 63 lb.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Toyota Land Cruiser build
More parts that fit your Toyota Land Cruiser and pair well with this one — matched and ready to install.
$1,019.00
$85.99
$85.99
$85.99
$85.99
More for your Toyota Land Cruiser
Picked from the 399 parts we carry for the Toyota Land Cruiser, matched to 2024+ model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
RCI Ascent Roof Rack FAQs
Do I need to take the antenna off?
No, the rack does not require removing or altering the antenna.
Does it need drilling?
No. It uses the existing roof rack mounting holes.
How long does installation take?
About 45 minutes.
Can I add accessories later?
Yes. The T-slots accept nut plates and carriage bolts, and the side panels have built-in slots.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
