2024-2026 Ford Ranger Raptor ADD Edge Front Bumper
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Addictive Desert Designs Warranty
At a glance: 1-year limited warranty on manufactured parts against defects in materials and workmanship
This is Addictive Desert Designs's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| All ADD-manufactured parts (bumpers, skids, fairleads, etc.) | 1 year from date of purchase |
| Powder coat / finish | Not separately addressed (falls under the 1-year policy) |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials or workmanship found within one year of purchase
- ADD's obligation is limited to the cost of the product itself (repair or replace the part)
What's not covered
- Installation or labor costs
- Freight / shipping charges
- Normal wear and tear
- Damage from abuse, misuse, collisions or accidents
- Parts that were altered, modified, poorly cared for or installed incorrectly
- Damage from negligence, improper maintenance or unauthorized repair
- Consequential costs such as vehicle downtime, delays or mileage
How to make a Addictive Desert Designs warranty claim
- Notify ADD within one month of discovering the defect
- Return the defective part to ADD at your own expense while still inside the 1-year window
- ADD inspects the part to confirm the defect was not caused by misuse, accident or alteration before repairing/replacing
Addictive Desert Designs contact: Phone: (855) 233-8992 or (480) 671-0820 · Email: sales@addictivedesertdesigns.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Addictive Desert Designs, and help it along either way.
Shop Addictive Desert Designs at NVMOS
2021-2026 Ford Bronco Digital Device Dash Mount
2021-2026 Ford Bronco Adaptive Cruise Control Relocation Bracket in Hammer Black
2021-2026 Ford F-150 Adaptive Cruise Control Relocation Bracket
See all Addictive Desert Designs products, lead times and FAQs →
Disclaimer: The information on this page describes Addictive Desert Designs's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Addictive Desert Designs official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Addictive Desert Designs (ADD) builds steel bumpers, chase racks and skid plates in Chandler, Arizona. NVMOS carries ADD bumpers, mounts, racks and the small brackets that keep factory sensors working, for Ford, RAM, GM, Toyota and Jeep trucks that need to carry a winch, lights and a little more abuse.
Based in: Chandler, Arizona · Made in: USA (Chandler, Arizona) · Founded: 2007 · Lead time: Many items in stock; some new releases 4–6 weeks
Shop all 326 Addictive Desert DesignsWarrantyAll brands
Warranty terms are set by Addictive Desert Designs, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
2024-2026 Ford Ranger Raptor ADD Edge Front Bumper
The ADD Edge bumper for the 2024+ Ranger Raptor has the lowest-profile wings of any Addictive Desert Designs bumper line, which gives it the most clearance for climbing over larger obstacles. A frenched-in center pocket holds four 6-inch round lights.
It is built from steel with a removable 3/16-inch aluminum skid plate, and it keeps the factory recovery points, parking sensors, drive assist features and intercooler.
| Spec | Detail |
|---|---|
| Part number | F720443130103 |
| Fitment | 2024-2026 Ford Ranger Raptor (Raptor trim only) |
| Not compatible with | XL, XLT or LARIAT trims; OEM fog lights; OEM skid plate |
| Construction | Steel bumper, removable 3/16-inch aluminum skid plate |
| Finish | Hammer black powder coat with satin black accent panels |
| Lighting | (4) RIGID 360 Series 6-inch or (4) Baja Designs LP4 round lights (lights not included) |
| Retains | OEM recovery points, parking sensors, drive assist, intercooler |
| Requires for ACC | ADD Adaptive Cruise Control Relocation Bracket (sold separately) |
| Installation | Trimming inner fender liners recommended |
| Made in | USA, designed and built by ADD in Chandler, Arizona |
Will it fit my Ranger XLT or LARIAT?
No. It is for the Ranger Raptor trim only and is not compatible with XL, XLT or LARIAT models.
Can I keep adaptive cruise control?
Yes, with the ADD Adaptive Cruise Control Relocation Bracket, which is required to retain ACC and sold separately.
Which lights fit the center mount?
Four 6-inch round lights: RIGID 360 Series 6-inch or Baja Designs LP4. Lights are not part of the bumper.
Do my fog lights and skid plate carry over?
No. The bumper is not compatible with the OEM fog lights or OEM skid plate; it has its own removable aluminum skid plate.
Install guides & documents
Complete your Ranger Raptor build
More parts that fit your Ranger Raptor and pair well with this one — matched and ready to install.
$2,398.98
$1,898.98
$198.98
$2,398.98
$1,698.98
More for your Ford Ranger Raptor
Picked from the 27 parts we carry for the Ford Ranger Raptor, matched to 2024–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
