Addictive Desert Designs Edge Rear Bumper - Ford Ranger Raptor 2024-2026
Warranty Information
Vendor warranty summary
Addictive Desert Designs Warranty
At a glance: 1-year limited warranty on manufactured parts against defects in materials and workmanship
This is Addictive Desert Designs's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| All ADD-manufactured parts (bumpers, skids, fairleads, etc.) | 1 year from date of purchase |
| Powder coat / finish | Not separately addressed (falls under the 1-year policy) |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials or workmanship found within one year of purchase
- ADD's obligation is limited to the cost of the product itself (repair or replace the part)
What's not covered
- Installation or labor costs
- Freight / shipping charges
- Normal wear and tear
- Damage from abuse, misuse, collisions or accidents
- Parts that were altered, modified, poorly cared for or installed incorrectly
- Damage from negligence, improper maintenance or unauthorized repair
- Consequential costs such as vehicle downtime, delays or mileage
How to make a Addictive Desert Designs warranty claim
- Notify ADD within one month of discovering the defect
- Return the defective part to ADD at your own expense while still inside the 1-year window
- ADD inspects the part to confirm the defect was not caused by misuse, accident or alteration before repairing/replacing
Addictive Desert Designs contact: Phone: (855) 233-8992 or (480) 671-0820 · Email: sales@addictivedesertdesigns.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Addictive Desert Designs, and help it along either way.
Shop Addictive Desert Designs at NVMOS
2021-2026 Ford Bronco Digital Device Dash Mount
2021-2026 Ford Bronco Adaptive Cruise Control Relocation Bracket in Hammer Black
2021-2026 Ford F-150 Adaptive Cruise Control Relocation Bracket
See all Addictive Desert Designs products, lead times and FAQs →
Disclaimer: The information on this page describes Addictive Desert Designs's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Addictive Desert Designs official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Addictive Desert Designs (ADD) builds steel bumpers, chase racks and skid plates in Chandler, Arizona. NVMOS carries ADD bumpers, mounts, racks and the small brackets that keep factory sensors working, for Ford, RAM, GM, Toyota and Jeep trucks that need to carry a winch, lights and a little more abuse.
Based in: Chandler, Arizona · Made in: USA (Chandler, Arizona) · Founded: 2007 · Lead time: Many items in stock; some new releases 4–6 weeks
Shop all 326 Addictive Desert DesignsWarrantyAll brands
Warranty terms are set by Addictive Desert Designs, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The Addictive Desert Designs Edge is a low-profile rear bumper for the 2024-2026 Ford Ranger Raptor. It tightens up the back of the truck and follows the Raptor's body lines, but it does it without costing you anything the truck shipped with, and it leaves good clearance for off-road driving.
Why it works
- Nothing lost from stock. The OEM parking sensors, recovery points, license plate lights and all drive assist features are retained.
- Clearance where it counts. The low-profile shape tracks the Raptor's body lines and leaves good clearance for off-road driving.
- Room for lights. Integrated mounts take either two Rigid Industries SR-M Series lights or two Baja Designs S2 lights, for night driving and trail use. Lights are not included, so budget for the pair you want.
- Finish. Hammer black powder coat with satin black accent panels. Made in the USA.
Fitment
2024-2026 Ford Ranger Raptor. Part number R720295090103.
Install notes
Bolt-on, using the supplied hardware. The vendor does not describe any fabrication.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Ranger build
More parts that fit your Ranger and pair well with this one — matched and ready to install.
$1,898.98
$1,799.99
$69.99
$99.99
$59.99
More for your Ford Ranger
Picked from the 264 parts we carry for the Ford Ranger, matched to 2024–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
Addictive Desert Designs Edge Rear Bumper FAQs
Which lights fit the mounts?
Two Rigid Industries SR-M Series lights or two Baja Designs S2 lights. Lights are sold separately.
Does it fit a regular Ranger?
It is listed for the 2024-2026 Ranger Raptor.
Will parking sensors still work?
Yes, they are retained, along with drive assist features.
Does it need cutting?
The vendor describes a straightforward bolt-on with supplied hardware.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
