Morimoto Housing Cap: Stepped (96mm)
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Morimoto Warranty
At a glance: 5 years on headlight and tail light assemblies; limited lifetime on off-road lighting
This is Morimoto's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Headlight and tail light assemblies (e.g. XB) | 5 years |
| Off-road lighting | Limited lifetime |
| 2Stroke LED bulbs (per product page) | Limited lifetime |
What's covered
- Product failures and defects on headlights and tail lights for 5 years
- Off-road lights for a limited lifetime
- Products must be bought from an authorized Morimoto dealer
What's not covered
- Modifications, alterations, or misuse
- Products bought from unauthorized sellers
- Damage or problems caused by improper installation (document issues before removing lights)
How to make a Morimoto warranty claim
- If something isn't right, take photos or video of the problem before removing the lights
- Contact Morimoto support by phone or email before doing anything else
- Follow their instructions (some items may be field-destroyed with photos; housings usually need to be returned)
Morimoto contact: Phone: 424-239-5142 · Email: morimotohid@morimotohid.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Morimoto, and help it along either way.
Shop Morimoto at NVMOS
Morimoto BigBanger LED Pods: HXB Spot Beam
Morimoto 4Banger LED Pods: HXB Combo Beam
Morimoto 2Banger LED Pods: NCS Combo Beam
See all Morimoto products, lead times and FAQs →
Disclaimer: The information on this page describes Morimoto's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Morimoto official warranty information. Last updated on nvmos.com: October 28, 2026. See our return policy for NVMOS's own terms.
About the brand
Morimoto headlights are why most people land here: plug-and-play XB LED headlight assemblies that replace dim factory halogens on Ford, Ram, Chevy/GMC, Toyota, Jeep and Nissan trucks. Morimoto designs, engineers and tests its lights in-house in Atlanta, and NVMOS also carries its LED headlights, tail lights, fog lights, ditch light kits and Banger pods.
Based in: Atlanta, Georgia · Founded: 2008 · Lead time: In-stock items ship in 24–48 hours
Shop all 879 MorimotoWarrantyAll brands
Warranty terms are set by Morimoto, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Morimoto Housing Cap: Stepped (96mm)
Seal It Up: Retrofit left the back side of your housings a bit open to the elements? These rubber housing caps may be your perfect solution to close that back up for good. Sizing: These rubber housing caps are available in a variety of diameters and shapes to fit the most common headlight flanges. To Measure: Measure the outer diameter of your headlight's rear flange and select from the size menu above. If you're over by +3mm, we recommend going for the next size up and using a large zip tie to secure them. Durable: These headlight accessories are made of durable black rubber, they won't harden or crack over time through from hot and cold temperature changes. Ribbed inner ridge works to keep them fit snugly to the backside of the housing. What else? Well... that's about it. They're rubber, they're housing caps, they keep crud out of your custom headlights. If you have a gap, you probably should order our rubber housing caps. That's all!
RETROFITS: Added depth inside sealed housingsDIAMETERS: 43-100mmFIT FLANGES: +/-3mm Listed Size
HOUSING CAP: 1x Rubber 96mm SteppedWarranty: 1 Year
Part #: A283. Questions about fitment? Call or text us at (920) 249-7744.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
