Morimoto BangerBar Mounting Feet & Middle Support Legs
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Morimoto Warranty
At a glance: 5 years on headlight and tail light assemblies; limited lifetime on off-road lighting
This is Morimoto's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Headlight and tail light assemblies (e.g. XB) | 5 years |
| Off-road lighting | Limited lifetime |
| 2Stroke LED bulbs (per product page) | Limited lifetime |
What's covered
- Product failures and defects on headlights and tail lights for 5 years
- Off-road lights for a limited lifetime
- Products must be bought from an authorized Morimoto dealer
What's not covered
- Modifications, alterations, or misuse
- Products bought from unauthorized sellers
- Damage or problems caused by improper installation (document issues before removing lights)
How to make a Morimoto warranty claim
- If something isn't right, take photos or video of the problem before removing the lights
- Contact Morimoto support by phone or email before doing anything else
- Follow their instructions (some items may be field-destroyed with photos; housings usually need to be returned)
Morimoto contact: Phone: 424-239-5142 · Email: morimotohid@morimotohid.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Morimoto, and help it along either way.
Shop Morimoto at NVMOS
Morimoto BigBanger LED Pods: HXB Spot Beam
Morimoto 4Banger LED Pods: HXB Combo Beam
Morimoto 2Banger LED Pods: NCS Combo Beam
See all Morimoto products, lead times and FAQs →
Disclaimer: The information on this page describes Morimoto's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Morimoto official warranty information. Last updated on nvmos.com: October 28, 2026. See our return policy for NVMOS's own terms.
About the brand
Morimoto headlights are why most people land here: plug-and-play XB LED headlight assemblies that replace dim factory halogens on Ford, Ram, Chevy/GMC, Toyota, Jeep and Nissan trucks. Morimoto designs, engineers and tests its lights in-house in Atlanta, and NVMOS also carries its LED headlights, tail lights, fog lights, ditch light kits and Banger pods.
Based in: Atlanta, Georgia · Founded: 2008 · Lead time: In-stock items ship in 24–48 hours
Shop all 877 MorimotoWarrantyAll brands
Warranty terms are set by Morimoto, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Morimoto BangerBar Mounting Feet & Middle Support Legs
Replacement and add-on mounts for Morimoto BangerBars. The bar-end feet bolt a complete bar to any flat surface, like a metal bumper or roof rack, and let you dial in the vertical aim. The middle support leg carries the weight at the center of longer bars.
Each bar needs one set of end feet. Longer bars also need middle support legs; see the table for how many.
| Spec | Detail |
|---|---|
| End feet | Machined aluminum / stamped steel, sold as a pair |
| Middle support leg | Stamped steel with rubber footing, sold each |
| Adjustment | Radius ±9°, vertical aim ±45° |
| Legs needed, 2Banger | Under 24": none. 24": one. Over 24": two |
| Legs needed, BigBanger | 29" bar: one. Larger bars: two |
| Low Pro | BigBanger Low Pro feet are 29 mm shorter than the standard BAF089SF and pair with the Low Pro leg; made for JK, JL and Bronco BigBanger bar kits |
| Warranty | Lifetime limited |
How many legs does my bar need?
For a 2Banger bar: none under 24 inches, one at 24 inches, two over 24 inches. For a BigBanger bar: one on the 29-inch bar and two on anything larger.
Do I need one set of feet per bar?
Yes. Each bar needs one set of end feet, which come as a pair.
What is the Low Pro version for?
The Low Pro BigBanger feet sit 29 mm lower than standard and are meant for the JK, JL and Bronco BigBanger bar kits. Use them with the Low Pro support leg.
Videos
Technical specifications
| Finish Technique | Anodized and Powder Coated |
|---|---|
| Hardware | 304 and 316 Stainless |
| Hardware | 316 Stainless Screws |
| Radius Range | +/- 9 Degrees |
| Vertical Aiming Range | +/- 45 Degrees |
Compatibility
| End Mounting Feet | Universal |
|---|
In the box
| Mounting Accessories | 2x (One Pair) End Mounting Feet |
|---|---|
| Hardware | All components include stainless hardware |
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
