Morimoto 4Banger LED Pods: NCS Spot Beam
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Morimoto Warranty
At a glance: 5 years on headlight and tail light assemblies; limited lifetime on off-road lighting
This is Morimoto's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Headlight and tail light assemblies (e.g. XB) | 5 years |
| Off-road lighting | Limited lifetime |
| 2Stroke LED bulbs (per product page) | Limited lifetime |
What's covered
- Product failures and defects on headlights and tail lights for 5 years
- Off-road lights for a limited lifetime
- Products must be bought from an authorized Morimoto dealer
What's not covered
- Modifications, alterations, or misuse
- Products bought from unauthorized sellers
- Damage or problems caused by improper installation (document issues before removing lights)
How to make a Morimoto warranty claim
- If something isn't right, take photos or video of the problem before removing the lights
- Contact Morimoto support by phone or email before doing anything else
- Follow their instructions (some items may be field-destroyed with photos; housings usually need to be returned)
Morimoto contact: Phone: 424-239-5142 · Email: morimotohid@morimotohid.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Morimoto, and help it along either way.
Shop Morimoto at NVMOS
Morimoto Ford Super Duty (17-22) XB Evo+ LED Fog Lights
Morimoto Ford F-150 (18-20) XB Evo+ LED Fog Lights
Morimoto Ford F-150 (15-17) XB Evo+ LED Fog Lights
See all Morimoto products, lead times and FAQs →
Disclaimer: The information on this page describes Morimoto's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Morimoto official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Morimoto headlights are why most people land here: plug-and-play XB LED headlight assemblies that replace dim factory halogens on Ford, Ram, Chevy/GMC, Toyota, Jeep and Nissan trucks. Morimoto designs, engineers and tests its lights in-house in Atlanta, and NVMOS also carries its LED headlights, tail lights, fog lights, ditch light kits and Banger pods.
Based in: Atlanta, Georgia · Founded: 2008 · Lead time: In-stock items ship in 24–48 hours
Shop all 621 MorimotoWarrantyAll brands
Warranty terms are set by Morimoto, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Morimoto 4Banger LED Pods — NCS Spot Beam
The NCS Spot is the long-range 4Banger. Three Nichia NCS emitters sit behind optics that build a 5-degree hot spot, putting 105,000 candela of white light well down the trail while still throwing some flood around it.
The housing runs 30% smaller than what it replaces, so it tucks into ditch and bumper mounts without dominating the front end. Designed, engineered and tested in the USA.
| Spec | Detail |
|---|---|
| Light source | 3x Nichia NCSW131F (white) or NCSY131F (yellow) |
| Beam pattern | Spot — 5-degree hot spot with flood spill |
| Intensity (white) | 105,000 cd post warm-up (1,005 lux @ 10m) |
| Intensity (yellow) | 73,500 cd post warm-up (735 lux @ 10m) |
| Peak luminosity (raw) | 1,350 lm |
| Power (stabilized) | 15.6w |
| Current | 1.5A @ 13.5V DC |
| Input | Proprietary overmolded Deutsch DT 2-pin |
| Dimensions | 82mm W, 67mm H, 60mm D |
| Hardware | M6 x 1.0 x 8mm (4Banger to U-bracket), M10 x 1.5 x 20mm (U-bracket base) |
| Materials | Makrolon LED PC lens, powdercoated die-cast aluminum housing |
| Weather rating | IP69K |
| Fitment | Universal. All specifications listed are per pod / each. |
Are these figures for one pod or a pair?
Every figure in the spec table is per pod / each. The 15.6w draw, 1.5A current and 1,350 lm raw output are single-pod numbers.
Which beam pattern should I choose?
The NCS Spot builds a 5-degree hot spot for long-range visibility. If you want width instead of distance, the NCS Combo and NCS Wide use the same housing with different optics.
White or yellow?
White NCS emitters produce 105,000 cd and yellow produce 73,500 cd. Yellow gives up peak intensity in exchange for better contrast in weather.
How do they mount and wire in?
Each pod uses a proprietary overmolded Deutsch DT 2-pin input. Mounting is M6 x 1.0 x 8mm from the pod to the U-bracket and M10 x 1.5 x 20mm at the bracket base, and the 30% smaller housing is sized to work with Morimoto's mounting kits.
Videos
Technical specifications
| Note | These specifications are per pod / each. |
|---|---|
| Intensity | 105,000 Cd (Post Warm-Up) (1,005lux @ 10m) |
| Input | Integrated Deutsch DT 2-Pin |
| Power (stabilized) | 15.6w |
| Current | 1.5A @ 13.5V DC |
| Peak Luminosity (raw) | 1,350lm |
| Dimensions | 82mm W, 67mm H, 60mm D |
| Hardware | M6 x 1.0 x 8mm (4Banger to U-Bracket), M10 x 1.5 x 20mm (U-Bracket base) |
| Light Source | 3x Nichia NCSW131F |
| Material | Makrolon LED PC (Lens), Powdercoated Die Cast Aluminum (Housing) |
Compatibility
| Universal | With Included U Brackets |
|---|
In the box
| LED Pods | 2x (One Pair) Morimoto 4Banger NCS Spot (White) |
|---|---|
| Brackets | Not Included, Must Purchase Separately (BAF046 or BAF047) |
| Hardware | Complete pack (stainless steel) |
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
