Morimoto 4Banger LED Pods: HXB Spot Beam
Warranty Information
Vendor warranty summary
Morimoto Warranty
At a glance: 5 years on headlight and tail light assemblies; limited lifetime on off-road lighting
This is Morimoto's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Headlight and tail light assemblies (e.g. XB) | 5 years |
| Off-road lighting | Limited lifetime |
| 2Stroke LED bulbs (per product page) | Limited lifetime |
What's covered
- Product failures and defects on headlights and tail lights for 5 years
- Off-road lights for a limited lifetime
- Products must be bought from an authorized Morimoto dealer
What's not covered
- Modifications, alterations, or misuse
- Products bought from unauthorized sellers
- Damage or problems caused by improper installation (document issues before removing lights)
How to make a Morimoto warranty claim
- If something isn't right, take photos or video of the problem before removing the lights
- Contact Morimoto support by phone or email before doing anything else
- Follow their instructions (some items may be field-destroyed with photos; housings usually need to be returned)
Morimoto contact: Phone: 424-239-5142 · Email: morimotohid@morimotohid.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Morimoto, and help it along either way.
Shop Morimoto at NVMOS
Morimoto BigBanger LED Pods: HXB Spot Beam
Morimoto 4Banger LED Pods: HXB Combo Beam
Morimoto 2Banger LED Pods: NCS Combo Beam
See all Morimoto products, lead times and FAQs →
Disclaimer: The information on this page describes Morimoto's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Morimoto official warranty information. Last updated on nvmos.com: October 28, 2026. See our return policy for NVMOS's own terms.
About the brand
Morimoto headlights are why most people land here: plug-and-play XB LED headlight assemblies that replace dim factory halogens on Ford, Ram, Chevy/GMC, Toyota, Jeep and Nissan trucks. Morimoto designs, engineers and tests its lights in-house in Atlanta, and NVMOS also carries its LED headlights, tail lights, fog lights, ditch light kits and Banger pods.
Based in: Atlanta, Georgia · Founded: 2008 · Lead time: In-stock items ship in 24–48 hours
Shop all 877 MorimotoWarrantyAll brands
Warranty terms are set by Morimoto, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Morimoto 4Banger LED Pods — HXB Spot Beam
The HXB Spot is the far end of the 4Banger range. Three Osram HX Boost emitters push 170,000 candela of white light through spot optics that reach up to 800 meters.
It runs 42w per pod for that output, in the same 30% smaller housing that fits Morimoto's mounting kits. Morimoto states it is compliant with SAE standards for auxiliary high beams and fog lights.
| Spec | Detail |
|---|---|
| Light source | 3x Osram HX Boost (5700K) |
| Beam pattern | Spot — up to 800m |
| Intensity (white) | 170,000 cd post warm-up (1,700 lux @ 10m) |
| Intensity (yellow) | 119,000 cd post warm-up (1,190 lux @ 10m) |
| Peak luminosity (raw) | 3,000 lm |
| Power (stabilized) | 42w |
| Current | 3.2A @ 13.5V DC |
| Input | Proprietary overmolded Deutsch DT 2-pin |
| Dimensions | 82mm W, 67mm H, 60mm D |
| Hardware | M6 x 1.0 x 8mm (4Banger to U-bracket), M10 x 1.5 x 20mm (U-bracket base) |
| Materials | Makrolon LED PC lens, powdercoated die-cast aluminum housing |
| Compliance | Compliant with SAE standards for auxiliary high beams and fog lights |
| Weather rating | IP69K |
| Fitment | Universal. All specifications listed are per pod / each. |
How far do these actually throw?
Morimoto rates the Osram HX Boost emitters in the HXB Spot as lighting up to 800 meters, at 170,000 cd in white.
Are these figures for one pod or a pair?
Every figure in the spec table is per pod / each. The 42w draw and 3.2A current are single-pod numbers, which matters when you size the harness.
Are they street legal?
They are compliant with SAE standards for auxiliary high beams and fog lights. Local rules on how auxiliary lighting may be wired and used still apply.
What is the difference between HXB and NCS?
HXB uses Osram HX Boost emitters at 42w and 3,000 lm raw per pod. NCS uses Nichia emitters at 15.6w and 1,350 lm raw. HXB is the higher-output, higher-draw option in the same housing.
Videos
Technical specifications
| Note | These specifications are per pod / each. |
|---|---|
| Intensity | 170,000 Cd (Post Warm-Up) (1,700lux @ 10m) |
| Input | Integrated Deutsch DT 2-Pin |
| Power (stabilized) | 42w |
| Current | 3.2A @ 13.5V DC |
| Peak Luminosity (raw) | 3,000lm |
| Dimensions | 82mm W, 67mm H, 60mm D |
| Hardware | M6 x 1.0 x 8mm (4Banger to U-Bracket), M10 x 1.5 x 20mm (U-Bracket base) |
| Light Source | 3x Osram HX Boost (5700K) |
| Material | Makrolon LED PC (Lens), Powdercoated Die Cast Aluminum (Housing) |
Compatibility
| Universal | With Included U Brackets |
|---|
In the box
| LED Pods | 2x (One Pair) Morimoto 4Banger HXB Spot (White) |
|---|---|
| Brackets | Not Included, Must Purchase Separately (BAF046 or BAF047) |
| Hardware | Complete pack (stainless steel) |
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com























