Morimoto 3Easy Projector Shroud
Warranty Information
Vendor warranty summary
Morimoto Warranty
At a glance: 5 years on headlight and tail light assemblies; limited lifetime on off-road lighting
This is Morimoto's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Headlight and tail light assemblies (e.g. XB) | 5 years |
| Off-road lighting | Limited lifetime |
| 2Stroke LED bulbs (per product page) | Limited lifetime |
What's covered
- Product failures and defects on headlights and tail lights for 5 years
- Off-road lights for a limited lifetime
- Products must be bought from an authorized Morimoto dealer
What's not covered
- Modifications, alterations, or misuse
- Products bought from unauthorized sellers
- Damage or problems caused by improper installation (document issues before removing lights)
How to make a Morimoto warranty claim
- If something isn't right, take photos or video of the problem before removing the lights
- Contact Morimoto support by phone or email before doing anything else
- Follow their instructions (some items may be field-destroyed with photos; housings usually need to be returned)
Morimoto contact: Phone: 424-239-5142 · Email: morimotohid@morimotohid.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Morimoto, and help it along either way.
Shop Morimoto at NVMOS
Morimoto BigBanger LED Pods: HXB Spot Beam
Morimoto 4Banger LED Pods: HXB Combo Beam
Morimoto 2Banger LED Pods: NCS Combo Beam
See all Morimoto products, lead times and FAQs →
Disclaimer: The information on this page describes Morimoto's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Morimoto official warranty information. Last updated on nvmos.com: October 28, 2026. See our return policy for NVMOS's own terms.
About the brand
Morimoto headlights (often typed Marimoto or Mirimoto) are why most people land here: plug-and-play XB LED headlight assemblies that replace dim factory halogens on Ford, Ram, Chevy/GMC, Toyota, Jeep and Nissan trucks. Morimoto designs, engineers and tests its lights in-house in Atlanta, and NVMOS also carries its LED headlights, tail lights, fog lights, ditch light kits and Banger pods.
Based in: Atlanta, Georgia · Founded: 2008 · Lead time: In-stock items ship in 24–48 hours
Shop all 879 MorimotoWarrantyAll brands
Warranty terms are set by Morimoto, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Morimoto 3Easy Projector Shroud
3Easy: Lets start with the facts, there is nothing exciting about the design of this shroud. It's chrome. Its smooth. It+D1731s got no texture. No visual interest. No vents or holes for halos. It is the most utilitarian shroud known to retrofitting mankind, it's small, fit's in the tightest of spaces, and it's absolutely perfect [for that!] 3 Inch Projectors: If you've made the choice to shove a bigger projector with a 3 inch lens into something like your high beam reflector, and the projector just takes up all the available space to the point where no other shroud will fit -- BOOM, that's where these come in handy. 99% of the time, these will be used in quad retrofits where the high beam position is way tight. Keep it tight: They sit nice and tight on a Morimoto Mini D2S 5.0 Bixenon projector, which is really what they were designed for. There is just a tiny vent on top for air flow, and a cutout on the bottom to just barely let the Bi-xenon solenoid poke through. Otherwise, they'll cover up the entire front half of the projector very well and add minimal extra size to the overall package. Mounting: These will press-fit directly onto the lens holder of a D2S 5.0 projector, no centric ring needed. You could use a centric ring to mount these on something smaller like a Mini H1, but there's really no point since the Mini Gatling Gun shroud is even smaller. . If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us.
Morimoto Projectors: Mini D2S 5.0Other Projectors: G5, EvoXRLens Diameters: 3inLED Halos: 80mm RecommendedMounts with: JB Weld (no centric ring needed)
Shroud: 1x 3Easy Projector ShroudWarranty: 5 Years
Part #: S400. Questions about fitment? Call or text us at (920) 249-7744.
Morimoto 3Easy Projector Shroud FAQs
Is this one shroud or a pair?
One. The listing includes 1x shroud.
Which projectors does it fit?
Morimoto Mini D2S 5.0, plus G5 and EvoX-R projectors. Lens diameter: 3".
How does it mount?
With JB Weld. No centric ring is needed.
What size LED halo works?
80mm recommended.
What is the warranty?
Morimoto lists a 5-year warranty on this shroud.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com












