Baja Designs LP4 Pro LED Auxiliary Light Pod
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Baja Designs Warranty
At a glance: Limited lifetime (or 49,930 hours) on lights for recreational use; 5 years for commercial use
This is Baja Designs's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: November 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Light bars & auxiliary lights (recreational use) | Limited lifetime or 49,930 hours of operation, whichever comes first |
| Lights in commercial use (agriculture, industrial, mining, public safety) | 5 years or 49,930 hours, whichever comes first |
| sPOD electronics (bought after 4/1/23) | 5 years limited |
| Third-party brackets, harnesses, switches | Original manufacturer's warranty only |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in design and manufacturing only
- Baja Designs pays return freight if the defective item is sent back within 90 days of delivery
What's not covered
- Installation errors and installation labor
- Wear and tear, accidents, collisions, acts of God
- Misuse, abuse, or modifications not done by Baja Designs
- sPOD: water damage, reverse polarity, improper install
- Full warranty does not apply to items bought from unauthorized Amazon, eBay or Walmart resellers
- After 90 days from delivery, customer prepays freight to Baja Designs
How to make a Baja Designs warranty claim
- Call Baja Designs technical support to troubleshoot
- If inspection is needed, Baja issues an RMA form and number
- Ship the item marked with the RMA# to Baja Designs - Warranty, 2950 Norman Strasse Rd., San Marcos, CA 92069
Baja Designs contact: Phone: (760) 560-2252 · Email: bdwarranty@bajadesigns.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Baja Designs, and help it along either way.
Shop Baja Designs at NVMOS
Baja Designs Ford Bull Bar Light Kit - Ford 2023-2026 F-250/350 Super Duty
Baja Designs 7XL Linkable Bumper Light Kit - Ford 2023-2026 F-250/350 Super Duty
Baja Designs Ford XL Linkable Bumper Light Kit - Ford 2021-2026 Bronco; 2022-2026 Bronco Raptor; NOTE: w/ OE Steel Bumper
See all Baja Designs products, lead times and FAQs →
Disclaimer: The information on this page describes Baja Designs's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Baja Designs official warranty information. Last updated on nvmos.com: November 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Baja Designs is the San Marcos, California lighting company that built the first forward-projecting LED light bar. NVMOS carries their pods, light bars and vehicle-specific bumper, fog and reverse kits for Ford, Toyota, Jeep, RAM and GM trucks, for drivers who want to actually see the trail at night.
Based in: San Marcos, California · Founded: 1992 · Lead time: In-stock ships in 24–48 hrs
Shop all 552 Baja DesignsWarrantyAll brands
Warranty terms are set by Baja Designs, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The LP4 is the smallest variant in the LP lineup and uses the same design architecture of its larger siblings. The LP4 features a total of 8,857 raw lumens, pumping out 6,885 forward projecting raw lumens and 1,972 raw lumens of dedicated peripheral lighting courtesy of our patented Integrated Peripheral Technology (IPT) providing 200-degree spread of light that illuminates zones 1, 2 and 3 along with reaching into zone 4 spot. To keep your light performing at its highest level, the LP4 integrates our proprietary Direct Ducted Cooling (DDC) technology that allows air to travel through the front of the housing and over the rear heat sinks - drastically improving cooling capacity and performance. The addition of red, blue, or green backlight options alongside our original amber on the LP4 Pro gives enthusiasts the choice to customize their vehicle for shows, photo shoots or anywhere they want to bring attention. Backed by our 30 Day Satisfaction Gaurantee and Lifetime Limited Warranty for the ultimate in purchase protection. NOTE: This light does not come with a wiring harness. The applicable wiring harness for this light is 640175.
Disclaimer: Baja Designs LP series lights with red, blue, or green backlights are for EXHIBITION USE ONLY. Never use it on public roads to avoid confusion with law enforcement or emergency vehicles. The owner/driver is responsible for observing all highway equipment laws and safety regulations.
Satisfaction Guarantee – 30-Day Money Back Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
uService – Replaceable Lenses And Optics
ClearView – All The Light, Right Where You Need It
MoistureBlock – Waterproof, Rain Proof, Submersible
DirectSink – Direct Thermal Path Technology
5000K Daylight – Less Driver Fatigue, Natural Color
Technical specifications
| Light Quantity | 1 |
|---|---|
| Lighting Modes | Beam/Day-Time Running Backlighting |
| Lighting Quantity | 4 |
| Lighting Technology | LED |
| Product Type | LP4 Pro LED Light Pod |
| Secondary Amperage Rating (A) | 1.000 |
| Secondary Brightness (Lumens) | 1972 |
| Secondary Light Quantity | 4 LEDs |
| Secondary Lighting Technology | LED |
| Secondary Lighting Type | Integrated Peripheral Technology (IPT) |
| Secondary Wattage (W) | 15 |
| Terminal Connector | DT06-4S Deutsch |
| Terminal Type | Mating Connector |
| Universal or Specific | Universal |
| Wattage (W) | 75.900 |
| Wiring Harness Included | No |
| Amperage Rating (A) | 5.500 |
| Backlight Amperage Rating (A) | 0.350 |
| Backlight Wattage (W) | 4.830 |
| Beam Pattern | Spot |
| Bezel Material | Powder Coat Cast Aluminum |
| Brightness (Lumens) | 8857 |
| Description | Spot; Clear |
| Housing Material | Powder Coat Cast Aluminum |
| Depth (in.) | 3.200 |
| Height (in.) | 5.100 |
| Length (in.) | 5.100 |
| Weight (lbs.) | 2.800 |
| Product Type | LP4 Pro LED Light Pod |
| Secondary Amperage Rating (A) | 1.000 |
| Secondary Brightness (Lumens) | 1972 |
| Secondary Light Quantity | 4 LEDs |
| Secondary Lighting Technology | LED |
| Secondary Lighting Type | Integrated Peripheral Technology (IPT) |
| Secondary Wattage (W) | 15 |
| Terminal Connector | DT06-4S Deutsch |
| Terminal Type | Mating Connector |
| Universal or Specific | Universal |
| Wattage (W) | 75.900 |
| Wiring Harness Included | No |
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
