ICON 2025-2026 Toyota 4Runner 4WD Hybrid (i-FORCE MAX), 1.75-3" Lift, Stage 12 2.5 Suspension System, Billet, CDEV
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
ICON Vehicle Dynamics Warranty
At a glance: Lifetime on components, springs and weldments; shocks 12 months for defects
This is ICON Vehicle Dynamics's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Suspension components, springs, weldments | Limited lifetime, original retail purchaser |
| Shocks | 12 months from purchase, manufacturer's defect only |
| Delta Joint | 5 years from purchase (must register within 30 days) |
| Delta Joint Pro | 1 year from purchase |
| Finish | Not covered |
| Wear items (bushings etc.) once worn | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in materials and workmanship
- Covers the original retail buyer who owns the vehicle the part was first installed on
What's not covered
- Normal wear; worn wear items are not considered defective
- Finish
- Alterations, modifications, or installs that don't follow ICON's instructions
- Accidents, negligence, abuse or misuse
- Race, police, taxi, government or commercial vehicles
- Products sold outside the USA and Canada
- Delta Joints that weren't registered within 30 days (5-year term)
How to make a ICON Vehicle Dynamics warranty claim
- Gather proof of purchase
- Contact ICON or use the warranty page/form at iconvehicledynamics.com/pages/warranty-form
- Register Delta Joints at iconvehicledynamics.com/deltajointreg within 30 days to keep the 5-year term
- Ship the part to ICON for inspection when asked
- Owner pays service costs if failure came from neglect or improper installation; ICON also offers paid factory shock service
ICON Vehicle Dynamics contact: Phone: 951-689-4266 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to ICON Vehicle Dynamics, and help it along either way.
Shop ICON Vehicle Dynamics at NVMOS
ICON 1996-2004 Toyota Tacoma, 0-3" Lift, Front, V.S. 2.5 Series Coilover Kit, Remote Reservoir
ICON 1996-2004 Toyota Tacoma, 0-3" Lift, Front,V.S. 2.5 Series Coilover Kit, Extended Travel, Remote Reservoir w/ CDCV, 700 lbs/in Spring Rate
ICON 2008-16 Ford F250/F350 SD 4WD Diesel, 4-6.5” Lift, Front, 2.5 VS RR Coilover Kit
See all ICON Vehicle Dynamics products, lead times and FAQs →
Disclaimer: The information on this page describes ICON Vehicle Dynamics's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: ICON Vehicle Dynamics official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
ICON Vehicle Dynamics builds performance suspension in Riverside, California, from shocks and coilovers to complete Stage systems. NVMOS carries ICON lift kits, coilover kits, upper control arms, leaf springs and parts for Toyota, Jeep, Ford, Chevy/GMC, Ram and Nissan. For drivers who want the whole suspension engineered as one system.
Based in: Riverside, California · Made in: USA (in-house in Riverside) · Lead time: In-stock items ship in 24–48 hours
Shop all 2443 ICON Vehicle DynamicsWarrantyAll brands
Warranty terms are set by ICON Vehicle Dynamics, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
ICON's Stage 12 2.5 suspension system for the 2025-2026 Toyota 4Runner 4WD Hybrid with the i-FORCE MAX powertrain. It replaces the factory front struts and rear shocks with 2.5 Series coilovers with CDEV remote reservoirs up front and 2.5 Aluminum Series remote reservoir CDEV shocks out back, and gives you 1.75-3 in. of adjustable front lift with up to 1.875 in. in the rear.
Hybrid only. This is the hybrid-specific kit. The gas-engine 4Runner kits use different rear numbers (0.75 in. of rear lift on the gas truck versus up to 1.875 in. here), so a gas kit will not level a hybrid and this kit is not for the gas truck. Check that your 4Runner is a 4WD i-FORCE MAX before ordering.
Why this stage
Stage 12 sits in a ladder of fourteen 2.5 Series kits for this truck. Each step adds hardware or adjustability, so pick the stage that matches how you drive rather than the biggest number. Beyond the shocks and springs, this kit adds billet upper control arms with ICON's Delta Joint PRO and an adjustable rear track bar. The new arms fix the ball joint angle the lift creates and give the alignment shop more camber and caster to work with. The track bar puts the rear axle back under the body after the lift. CDEV valving is electronic and runs through ICON Intelligent Control, so damping can be changed from an app and adjusts on its own with terrain. It is the most capable option and also the most to wire up.
What's included
- 2.5 Series coilovers with CDEV remote reservoirs and ICON coil springs, height adjustable for 1.75-3 in. of front lift
- Front differential drop brackets and polyurethane differential mounting bushings
- Billet upper control arm kit with ICON Delta Joint PRO ball joints
- Dual-rate rear coil springs (up to 1.875 in. of rear lift)
- Billet adjustable rear track bar
- 2.5 Aluminum Series remote reservoir CDEV rear shocks
Install notes
This is a full front and rear suspension swap. Plan on a shop or a well-equipped garage, a spring-safe coilover install, and a professional alignment afterward. Set front ride height on the coilovers before the alignment, not after. Install instructions are on ICON's site under the part number K54412. If you are not sure which stage fits your build, call real humans at (920) 249-7744 with your trim, tire size and plans.
Fitment
- Fits 2025-2026 Toyota 4Runner 4WD Hybrid (i-FORCE MAX)
- Not for gas-engine or 2WD 4Runners
- Lift: 1.75-3 in. front (adjustable), up to 1.875 in. rear
Install guides & documents
Complete your Toyota 4Runner build
More parts that fit your Toyota 4Runner and pair well with this one — matched and ready to install.
$7,974.95
$169.00
$64.95
$19.99
$39.99
More for your Toyota 4Runner
Picked from the 1846 parts we carry for the Toyota 4Runner, matched to 2025–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
ICON 2025-2026 Toyota 4Runner 4WD Hybrid (i-FORCE MAX), 1.75-3" Lift, Stage 12 2.5 Suspension System, Billet, CDEV FAQs
Will this fit a gas-engine 2025-2026 4Runner?
No. This kit is for the 4WD 4Runner with the i-FORCE MAX hybrid powertrain. ICON sells separate kits for the gas-engine truck, and the rear lift numbers differ, so order the hybrid version.
How much lift does it give?
1.75-3 in. of adjustable front lift and up to 1.875 in. in the rear, which levels the hybrid front to rear.
Billet or tubular, which should I pick?
Both correct the front geometry and use the Delta Joint PRO. Billet is machined aluminum and costs more; tubular does the same job for less money.
What does CDEV need to work?
CDEV valves are run through ICON Intelligent Control. Check ICON's install documents for the IIC hardware your build needs, or call us and we will sort it out.
What is the warranty?
See our ICON warranty page for the current terms.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
