2018-2026 Jeep Wrangler JL & Gladiator JT | 50-Inch Light Bar Mount
Warranty Information
Vendor warranty summary
DV8 Offroad Warranty
At a glance: 1-year limited warranty against defects in materials and workmanship
This is DV8 Offroad's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| All DV8-manufactured parts | 1 year from purchase |
| Third-party products sold by DV8 | Original manufacturer's warranty only |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials and workmanship on DV8-made parts
- DV8 decides whether to repair or replace with an equivalent product
What's not covered
- Installation, labor and freight
- Normal wear and tear
- Abuse, misuse, collision damage or neglect
- Altered, modified or improperly installed products
- Consequential losses such as vehicle downtime
How to make a DV8 Offroad warranty claim
- Notify DV8 within one month of discovering the defect
- Return the part to DV8 at your expense within the 1-year period
- DV8 inspects it and repairs or replaces if the defect is confirmed
DV8 Offroad contact: Phone: 855-680-9595 · Email: sales@dv8offroad.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to DV8 Offroad, and help it along either way.
Shop DV8 Offroad at NVMOS
883 Simulated Beadlock Wheel | Matte Bronze 20" 5x127
2021-2026 Ford Bronco | Adaptive Cruise Control Relocation Bracket
2021-2026 Ford Bronco | Digital Device Dash Mount
See all DV8 Offroad products, lead times and FAQs →
Disclaimer: The information on this page describes DV8 Offroad's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: DV8 Offroad official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
DV8 Offroad designs steel armor and accessories in Chandler, Arizona and Riverside, California. NVMOS carries their bumpers, skid plates, rock sliders, fender flares, MOLLE storage, racks and interior parts for Jeep Wrangler and Gladiator, Ford Bronco, and a growing list of Toyota, Ford, GM and Ram trucks.
Based in: Chandler, Arizona · Designed in: Chandler, AZ & Riverside, CA · Lead time: In-stock ships in 24–48 hrs
Shop all 493 DV8 OffroadWarrantyAll brands
Warranty terms are set by DV8 Offroad, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
DV8 Offroad 50-Inch Light Bar Mount — Jeep Wrangler JL and Gladiator JT (LBJL-10)
This low-profile bracket set puts a 50-inch LED light bar right above the windshield of a Wrangler JL or Gladiator JT. It sits low to cut down on wind noise while staying out of your line of sight.
The brackets are 5mm steel in a micro-texture black powder coat, bolt to factory locations with a three-bolt setup, and run your wiring through a hidden channel. High-density foam protects the paint on the cowl and A-pillar under each bracket.
| Spec | Detail |
|---|---|
| Part number | LBJL-10 |
| Fitment | Jeep Wrangler JL 2018-2026, Gladiator JT 2020-2026 |
| Not compatible | 4xe, 392 and Mojave models |
| Light bar | Most single or double row 50-inch bars |
| Mount-to-mount width | 52 in |
| Material | 5mm steel plate |
| Finish | Micro-texture black powder coat |
| Included | High-density foam paint protection |
| Install time | About 1.5 hours |
| Warranty | 1-year limited |
Which light bars fit?
Most single or double row 50-inch light bars. Total width from mount to mount is 52 inches, and bar widths vary by brand, so check your bar's end-to-end measurement.
Does it fit every JL and Gladiator?
No. DV8 lists it as not compatible with 4xe, 392 or Mojave models.
Is drilling required?
DV8 describes it as a bolt-on install to factory locations. Plan on about 1.5 hours.
Can I add pod lights too?
Yes. The LBJL-11 A-pillar dual pod mounts attach to this mount and add room for two 3-inch pods per side.
Compatibility
| Jeep Wrangler JL | 2018-2026 |
|---|---|
| Jeep Gladiator JT | 2020-2026 |
Install guides & documents
Complete your Jeep Gladiator build
More parts that fit your Jeep Gladiator and pair well with this one — matched and ready to install.
More for your Jeep Gladiator
Picked from the 1004 parts we carry for the Jeep Gladiator, matched to 2018–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
































