ICON Stage 7 Suspension System, Billet - 2019-2026 Ram 1500 2-3" Lift
Warranty Information
Vendor warranty summary
ICON Vehicle Dynamics Warranty
At a glance: Lifetime on components, springs and weldments; shocks 12 months for defects
This is ICON Vehicle Dynamics's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Suspension components, springs, weldments | Limited lifetime, original retail purchaser |
| Shocks | 12 months from purchase, manufacturer's defect only |
| Delta Joint | 5 years from purchase (must register within 30 days) |
| Delta Joint Pro | 1 year from purchase |
| Finish | Not covered |
| Wear items (bushings etc.) once worn | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in materials and workmanship
- Covers the original retail buyer who owns the vehicle the part was first installed on
What's not covered
- Normal wear; worn wear items are not considered defective
- Finish
- Alterations, modifications, or installs that don't follow ICON's instructions
- Accidents, negligence, abuse or misuse
- Race, police, taxi, government or commercial vehicles
- Products sold outside the USA and Canada
- Delta Joints that weren't registered within 30 days (5-year term)
How to make a ICON Vehicle Dynamics warranty claim
- Gather proof of purchase
- Contact ICON or use the warranty page/form at iconvehicledynamics.com/pages/warranty-form
- Register Delta Joints at iconvehicledynamics.com/deltajointreg within 30 days to keep the 5-year term
- Ship the part to ICON for inspection when asked
- Owner pays service costs if failure came from neglect or improper installation; ICON also offers paid factory shock service
ICON Vehicle Dynamics contact: Phone: 951-689-4266 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to ICON Vehicle Dynamics, and help it along either way.
Shop ICON Vehicle Dynamics at NVMOS
ICON 1996-2004 Toyota Tacoma, 0-3" Lift, Front, V.S. 2.5 Series Coilover Kit, Remote Reservoir
ICON 1996-2004 Toyota Tacoma, 0-3" Lift, Front,V.S. 2.5 Series Coilover Kit, Extended Travel, Remote Reservoir w/ CDCV, 700 lbs/in Spring Rate
ICON 2008-16 Ford F250/F350 SD 4WD Diesel, 4-6.5” Lift, Front, 2.5 VS RR Coilover Kit
See all ICON Vehicle Dynamics products, lead times and FAQs →
Disclaimer: The information on this page describes ICON Vehicle Dynamics's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: ICON Vehicle Dynamics official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
ICON Vehicle Dynamics builds performance suspension in Riverside, California, from shocks and coilovers to complete Stage systems. NVMOS carries ICON lift kits, coilover kits, upper control arms, leaf springs and parts for Toyota, Jeep, Ford, Chevy/GMC, Ram and Nissan. For drivers who want the whole suspension engineered as one system.
Based in: Riverside, California · Made in: USA (in-house in Riverside) · Lead time: In-stock items ship in 24–48 hours
Shop all 2450 ICON Vehicle DynamicsWarrantyAll brands
Warranty terms are set by ICON Vehicle Dynamics, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This is ICON's Stage 7 suspension system for the 2019-2026 Ram 1500, built around vehicle-specific 2.5" coilover shocks with CDCV remote reservoirs. The coilovers are height adjustable for 2-3" of front lift over stock, and because they are longer than the factory units they add front wheel travel, which is the point of the whole exercise. The lift leaves room for larger wheel and tire combinations.
Up front, the upper control arms are billet aluminum and use ICON's Delta Joint, a heavy-duty high-angle ball joint that pairs ball joint durability with the movement of a traditional uniball. The arms add strength, help hold factory alignment specs, offer on-vehicle caster and camber adjustment, and allow proper alignment at the lifted height.
The rear uses a dual-rate coil, with a softer initial rate for street comfort and a firmer overload rate to resist bottoming. It adds 1.5" of rear height over stock for a level stance, and an adjustable rear track bar keeps the axle aligned while removing the deflection of soft factory bushings. The rear shocks are ICON 2.5 Aluminum Series CDCV piggyback reservoir units with vehicle-specific valving, and the included ICON CDC valves are externally adjustable, giving 10 levels of compression damping. Billet rear lower links with PTFE-lined FK rod ends and multi-durometer bushings add articulation, cut deflection and allow on-vehicle length adjustment.
Fitment
Ram 1500, 2019-2026, per the vendor listing. Confirm trim and drivetrain details against the part number K213117 before ordering, or call us.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
ICON Stage 7 Suspension System, Billet FAQs
What years and trucks does this fit?
It is listed for the 2019-2026 Ram 1500. Check the part number and your trim with us if you are unsure.
What is the difference between the Billet and Tubular versions?
The billet system uses billet aluminum Delta Joint arms that offer on-vehicle caster and camber adjustment. The tubular version uses tubular arms that increase caster over stock.
How much lift does it give?
The front coilovers are adjustable for 2-3" of lift over stock and the rear adds 1.5", which gives a level stance.
Does it include a rear track bar?
Yes. The vendor lists an adjustable rear track bar to keep the rear axle aligned and remove bushing deflection.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
