Dual Powerswitch PowerTray > Tacoma TRD Off Road/Pro
Warranty Information
Vendor warranty summary
PowerTrays Warranty
At a glance: No written warranty published — we handle defects with the brand for you
This is PowerTrays's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
What to expect
PowerTrays doesn't publish a written warranty that we could find. In practice, parts that arrive damaged or show a manufacturing defect are handled between us and PowerTrays — you don't have to chase the brand on your own.
What PowerTrays does publish
- Items that arrive defective or damaged are replaced
- Returns and exchanges are accepted for 90 days
- Email PowerTrays with your order details and photos of the defect or damage
- Ship the item back as instructed
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to PowerTrays, and help it along either way.
Shop PowerTrays at NVMOS
sPOD BantamX PowerTray > Chevy Colorado 12-22
Tundra Bussmann RTMR PowerTray
Switch-Pros PowerTray > Jeep JL/JT 2018-Current > 3.6L V6
See all PowerTrays products, lead times and FAQs →
Disclaimer: The information on this page describes PowerTrays's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: PowerTrays official policy pages. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
PowerTrays makes vehicle-specific aluminum underhood mounts in Boulder, Colorado, for switch systems, fuse blocks and breakers. NVMOS carries the trays, accessory bundles, breakers and custom battery cables for Tacoma, 4Runner, FJ Cruiser, Lexus GX, Tundra, Jeep JL/JT and Colorado owners wiring up auxiliary power.
Based in: Boulder, Colorado · Made in: USA (Colorado) · Material: 1/8-inch brushed aluminum · Lead time: In stock: ships in 24–48 hours
Shop all 72 PowerTraysWarrantyAll brands
Warranty terms are set by PowerTrays, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
PowerTrays Dual PowerSwitch PowerTray — Tacoma TRD Off Road / TRD Pro
This tray mounts two Garmin PowerSwitch units and two grounding busbars in the engine bay of a 2nd or 3rd gen Tacoma with electric-assist braking, which in practice means TRD Off Road and TRD Pro trucks.
Each PowerSwitch has six circuits. Wiring an accessory is a matter of ring terminals on both leads, positive to a PowerSwitch circuit, negative to the common ground busbar.
| Spec | Detail |
|---|---|
| Vehicle | Toyota Tacoma 2nd and 3rd gen (2005–2023) with electric-assist braking (TRD Off Road, TRD Pro) |
| Transmission | Automatic, or manual without the fender-mounted clutch fluid reservoir |
| Clearance notes | Aftermarket hood struts: space tray out 1/2 in. (kit sold separately). Supercharged: relocate the reservoir or use the Standoff tray |
| Material | 1/8 in. 5052 aluminum |
| Manufacturing | Waterjet cut to ±0.003 in., edges hand-chamfered at 45° |
| Fasteners | PEM fasteners pressed into the tray, stainless steel screws for mounting accessories |
| Install hardware | JIS Class 10.9 steel |
| Included | Mounting platform, support leg, mounting hardware |
| Not included | Garmin PowerSwitch units, Blue Sea components, power/ground cables, terminals, fuses |
How do I know my Tacoma has electric-assist braking?
Look behind the brake master cylinder. No round vacuum booster there means electric-assist braking. Check the hardware, not badges or bedside stickers.
Will it fit my manual-transmission Tacoma?
Only without the clutch fluid reservoir on the inner fender, which most pre-2020 manual Tacomas have. It sits where the tray mounts; the Standoff tray is the alternative.
Does it include the PowerSwitch units?
No. It includes the platform, support leg and mounting hardware. PowerSwitch units, Blue Sea components, cables, terminals and fuses are separate.
I have aftermarket hood struts. Will it clear?
The tray needs to be spaced out about 1/2 in. for strut clearance. PowerTrays sells a spacer kit separately.
Complete your Toyota Tacoma build
More parts that fit your Toyota Tacoma and pair well with this one — matched and ready to install.
More for your Toyota Tacoma
Picked from the 2713 parts we carry for the Toyota Tacoma. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com



















