Dobinsons Rear Shock Extension Brackets with Hardware - Toyota Sequoia 2nd Gen
Warranty Information
Vendor warranty summary
Dobinsons Warranty
At a glance: 2 years / unlimited miles on springs and shocks; 1 year on other parts
This is Dobinsons's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Coil springs | 2 years, unlimited miles |
| Leaf springs | 2 years, unlimited miles |
| Shock absorbers | 2 years, unlimited miles |
| Winches | 2 years |
| Fridges | 5 years compressor; 1 year other components |
| All other parts | 1 year |
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Non-cosmetic manufacturing faults
- Coil springs: breakage, or sag of more than 10mm height loss
- Leaf springs: breakage, or sag of more than 12mm camber loss
- Shocks, winches, fridges and other parts: manufacturing faults only
What's not covered
- Products that are abused, misused, misapplied, neglected or altered
- Improper installation or maintenance
- Industrial, mining or agricultural use
- Wrongly selected parts and non-Dobinsons components
- Shipping costs to or from Dobinsons, labor, and consequential losses
How to make a Dobinsons warranty claim
- Notify Dobinsons in writing within the warranty window (2 years from invoice for springs/shocks, 12 months for other parts) - late claims are treated as waived
- Complete the online warranty form
- Return the part to Dobinsons or an approved importer for inspection, at your cost
Dobinsons contact: Phone: 305-424-8353 · Email: Sales@Dobinsonusa.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Dobinsons, and help it along either way.
Shop Dobinsons at NVMOS
Dobinsons Front Coil Springs Pair for 2021-2025 Ford Bronco 2-Door, Black - C19-568B
Dobinsons Front Coil Springs Pair for 2021-2025 Ford Bronco 4-Door - Teal - C19-570
See all Dobinsons products, lead times and FAQs →
Disclaimer: The information on this page describes Dobinsons's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Dobinsons official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Dobinsons is an Australian spring and suspension maker that has been building since 1953. NVMOS carries Dobinsons MRR 3-way adjustable lift kits and struts, coil springs, control arms, panhard kits and geometry parts for the 2021–2025 Ford Bronco, plus a Land Cruiser 60 Series kit. It's for owners who want to tune ride quality, not just add height.
Based in: Rockhampton, Queensland, Australia (US: Doral, Florida) · Made in: Springs made in Rockhampton, Australia · Founded: 1953
Shop all 56 DobinsonsWarrantyAll brands
Warranty terms are set by Dobinsons, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This kit lets you run the Dobinsons GS59-713 rear shocks on a 2nd Gen Toyota Sequoia with a 2.5 inch lift. The extension brackets bring the shock to the correct length so it works properly at that ride height, instead of bottoming or topping out.
The extensions are powder coated black and come with the grade 8.8 zinc-plated hardware to mount them, so there is nothing extra to source.
The kit exists to ensure proper shock length and performance at 2.5 inches of lift. It is a small, simple part: two powder-coated extensions and the hardware to mount them. It is not a lift by itself, and it is intended for use specifically with the Dobinsons GS59-713 rear shock.
Fitment
2nd Gen Toyota Sequoia, rear. It is specified for use with the Dobinsons GS59-713 rear shocks on a 2.5 inch lift.
What's included
Two powder-coated black shock extensions, two M18x2.5 80mm grade 8.8 zinc-plated bolts, two M18 grade 8.8 zinc-plated nuts, and two M18 zinc-plated washers.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Toyota Sequoia build
More parts that fit your Toyota Sequoia and pair well with this one — matched and ready to install.
$75.00
$36.00
$39.99
$29.99
$19.99
More for your Toyota Sequoia
Picked from the 372 parts we carry for the Toyota Sequoia. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
Dobinsons Rear Shock Extension Brackets with Hardware FAQs
What shocks does this go with?
The Dobinsons GS59-713 rear shocks.
What lift height is it for?
It allows those shocks to be used with a 2.5 inch lift.
Is hardware included?
Yes: two bolts, two nuts, and two washers alongside the two extensions.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
