CBI Swing Arm Multi Mount License Plate Bracket
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
CBI Offroad Fab Warranty
At a glance: Limited lifetime on CBI-made parts for the original owner; powder coat not covered
This is CBI Offroad Fab's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: November 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| CBI-manufactured parts (bumpers, sliders, armor, etc.) | Limited lifetime (original owner) |
| U-bolts | 1 year |
| Pull pins | 1 year |
| Hardware kits | 1 year (wear item) |
| CBI latch, latch catch, hub rebuild kit | Not covered (wear parts) |
| Powder coat finish | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in CBI-manufactured parts for as long as the original buyer owns them
- Missing parts or hardware if reported within 90 days
- CBI's remedy is limited to repair, replacement or refund
What's not covered
- Powder coat finish of any kind
- Normal wear, cosmetic rust and scratches
- Accidents, unlawful vehicle use, racing or competition
- Any customer modification or repair
- Misuse, neglect, overloading or improper assembly/installation
- Lost profits, consequential damages or damage to the vehicle
- Items lost in transit on return
How to make a CBI Offroad Fab warranty claim
- Test-fit the product and check all hardware before installing
- Submit a claim through the online warranty form (phone claims not accepted)
- Include a copy of your original invoice
- Wait for an RMA number (reply in about 2-3 business days)
- Ship the item to CBI, at your cost, with tracking and insurance, RMA printed on the label and box
CBI Offroad Fab contact: Phone: (866) 522-0697 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to CBI Offroad Fab, and help it along either way.
Shop CBI Offroad Fab at NVMOS
Toyota Tacoma Classic Front Bumper | 2024-2026
Chevy Colorado ZR2/Z71 Full Overland Skid Plates | 2015-2022
Chevy Colorado ZR2/Z71 Rear Skid Plates | 2015-2022
See all CBI Offroad Fab products, lead times and FAQs →
Disclaimer: The information on this page describes CBI Offroad Fab's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: CBI Offroad Fab official warranty information. Last updated on nvmos.com: November 4, 2026. See our return policy for NVMOS's own terms.
About the brand
CBI Offroad Fab builds steel and aluminum armor in Idaho Falls, Idaho. NVMOS carries CBI bumpers, rock sliders, skid plates and light brackets for Toyota Tacoma, 4Runner, Tundra, Land Cruiser 250, Lexus GX470, Chevy Colorado, Nissan Frontier and Sprinter owners who want their underside to stay intact.
Based in: Idaho Falls, Idaho · Made in: USA (Idaho Falls) · Building since: 1999 · Lead time: Built to order: about 2–12 weeks
Shop all 273 CBI Offroad FabWarrantyLead timesAll brands
Warranty terms are set by CBI Offroad Fab, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This bracket mounts a rear license plate to your CBI Swing Arm Multi Mount. It is a small part, but it keeps a rear-mounted spare and gear setup street ready where a plate is needed.
Why it works
- Plate on the swing arm. The plate rides on the multi-mount with the rest of your gear.
- Gear friendly. It works alongside Rotopax and Maxtrax, so the plate does not get in the way of either.
- Simple install. Designed to go on easily.
Fitment
Requires a CBI swing arm and a CBI Swing Arm Multi-Mount. It does not mount on its own.
Shop more tire carriers and swing-outs or more from CBI Offroad Fab.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text us at (920) 249-7744.
Complete your build
The pieces owners run with this one — matched to your build and to each other. Do the whole truck in one order instead of three.
$50.00
$62.00
$166.00
$580.00
$1,299.00
Specifications
CBI Swing Arm Multi Mount License Plate Bracket FAQs
What else do I need?
A CBI swing arm and the swing arm multi-mount.
Will it work with Rotopax?
Yes, it is compatible with Rotopax and Maxtrax.
Is it hard to install?
It is described as a simple installation.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
