C4 Fabrication Tundra Overland Series Front Bumper / 3rd Gen / 2022+
Warranty Information
Vendor warranty summary
C4 Fabrication Warranty
At a glance: 1 year from ship date on welds, hardware and mechanical parts; powder coat not covered
This is C4 Fabrication's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Welds, hardware and mechanical parts (manufacturing defects) | 1 year from the ship date |
| Powder coat finish | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Factory defects such as failed or broken welds
- Failed or broken hardware and mechanical parts
- C4 decides whether to send replacement parts or give a full or partial refund
What's not covered
- Powder coat on any part shipped coated or offered with a coating option
- Normal wear, rust and scratches
- Accidents, trail damage and highway damage
- Racing or competition use
- Overloading, wrong assembly or poor maintenance
- Acts of nature
- Parts the customer has modified, or not installed per C4's instructions
- Any damage to your vehicle, cargo, other people or property
How to make a C4 Fabrication warranty claim
- Contact C4 Fabrication by email or phone with your order details
- Describe and photograph the defect
- C4 reviews the claim and chooses the remedy
C4 Fabrication contact: Phone: 1-605-721-2911 · Email: sales@c4fabrication.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to C4 Fabrication, and help it along either way.
Shop C4 Fabrication at NVMOS
C4 Fabrication Tacoma Rock Runner Sliders / 3rd Gen / 2016-2023
C4 Fabrication Tacoma Rock Runner High Clearance Rear Bumper / 3rd Gen / 2016-2023
C4 Fabrication Tacoma High Clearance Fender Liners / 2nd Gen / 2005-2015
See all C4 Fabrication products, lead times and FAQs →
Disclaimer: The information on this page describes C4 Fabrication's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: C4 Fabrication official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
C4 Fabrication builds overland armor for Toyota and Lexus in Chandler, Arizona. NVMOS carries C4 front and rear bumpers, rock sliders, skid plates, body mount relocation kits and MOLLE storage for Tacoma, 4Runner, Tundra, Land Cruiser 250 and Lexus GX. It's for Toyota owners who want armor that fits right and looks the part.
Based in: Chandler, Arizona · Made in: USA (Chandler, Arizona) · Lead time: Bumpers ~8–14 weeks; sliders ~8–10; skids ~2
Shop all 146 C4 FabricationWarrantyAll brands
Warranty terms are set by C4 Fabrication, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The Overland Series Front Bumper for the 3rd Gen (2022–2025) Tundra delivers rugged off-road performance while maintaining full compatibility with Toyota Safety Sense, parking sensors, and the front-mounted camera. All bull bar configurations work with TSS, though low- and mid-height bars will appear in the camera’s view without obstructing it fully. A TSS recalibration may be required after installation, as sensor relocation can occasionally trigger the system to request adjustment. For optimal sensor performance, C4 Fabrication recommends a level truck stance, as excessive forward rake may cause increased sensitivity.
Engineered for both durability and function, this bumper is built from 3/16″ laser-cut P&O steel with 1/4″ thick mounting and winch plates, plus fully welded 3/4″ thick D-ring tabs. The bull bar is made from .120 wall HREW tubing in 1 3/4″ and 1 1/2″ diameters for strength and impact resistance. Designed to house a 40″ single-row light bar (specifically the Baja Designs S8) and one pair of Baja Designs Squadron fog lights, the bumper also accommodates LP9 lights on all options except the low bar, but they will not be pre-drilled. Integrated light cutouts come standard.
The bumper fits most 8k-12k winches, with WARN VR and ZEON series confirmed to fit, and performs best with synthetic rope and a hawse-style fairlead. It includes a steel front skid plate to replace the factory plastic version, provisions to reattach factory fender liners, and requires minor trimming of bumper panels and fender flares for installation. Available in multiple bull bar configurations: no bar (160 lbs), low bull bar (168 lbs), mid-height with gussets (174 lbs), and full bull bar with headlight hoops (182 lbs). This bumper blends heavy-duty strength, clean fitment, and sensor-friendly design for the ultimate overland upgrade. Unless ordered with the powder-coated finish, painting or coating is required before installation to prevent rust.
Videos
Complete your Toyota Tundra build
More parts that fit your Toyota Tundra and pair well with this one — matched and ready to install.
$1,994.00
$69.99
$79.95
$129.95
$299.95
More for your Toyota Tundra
Picked from the 1227 parts we carry for the Toyota Tundra, matched to 2022+ model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
