C4 Fabrication Tacoma Front Lo-Pro Winch Bumper / 3rd Gen / 2016-2023
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
C4 Fabrication Warranty
At a glance: 1 year from ship date on welds, hardware and mechanical parts; powder coat not covered
This is C4 Fabrication's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: November 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Welds, hardware and mechanical parts (manufacturing defects) | 1 year from the ship date |
| Powder coat finish | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Factory defects such as failed or broken welds
- Failed or broken hardware and mechanical parts
- C4 decides whether to send replacement parts or give a full or partial refund
What's not covered
- Powder coat on any part shipped coated or offered with a coating option
- Normal wear, rust and scratches
- Accidents, trail damage and highway damage
- Racing or competition use
- Overloading, wrong assembly or poor maintenance
- Acts of nature
- Parts the customer has modified, or not installed per C4's instructions
- Any damage to your vehicle, cargo, other people or property
How to make a C4 Fabrication warranty claim
- Contact C4 Fabrication by email or phone with your order details
- Describe and photograph the defect
- C4 reviews the claim and chooses the remedy
C4 Fabrication contact: Phone: 1-605-721-2911 · Email: sales@c4fabrication.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to C4 Fabrication, and help it along either way.
Shop C4 Fabrication at NVMOS
C4 Fabrication Tacoma Rock Runner Sliders / 3rd Gen / 2016-2023
C4 Fabrication Tacoma Rock Runner High Clearance Rear Bumper / 3rd Gen / 2016-2023
C4 Fabrication Tacoma High Clearance Fender Liners / 2nd Gen / 2005-2015
See all C4 Fabrication products, lead times and FAQs →
Disclaimer: The information on this page describes C4 Fabrication's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: C4 Fabrication official warranty information. Last updated on nvmos.com: November 4, 2026. See our return policy for NVMOS's own terms.
About the brand
C4 Fabrication builds bumpers, rock sliders and skid plates for Toyota and Lexus in Chandler, Arizona. NVMOS carries C4 Lo-Pro, Hybrid, Overland and Rock Runner bumpers, rock sliders, skid plates, body mount relocation kits and MOLLE storage for Tacoma, 4Runner, Tundra, Land Cruiser 250 and Lexus GX. It's for Toyota owners who want armor that fits right and looks the part.
Based in: Chandler, Arizona · Made in: USA (Chandler, Arizona) · Lead time: Bumpers ~8–14 weeks; sliders ~8–10; skids ~2
Shop all 148 C4 FabricationWarrantyAll brands
Warranty terms are set by C4 Fabrication, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Tacoma Front Lo-Pro Winch Bumper, 3rd Gen, 2016-2023
The Lo-Pro Winch Bumper is made for 3rd Gen Tacomas and blends with the truck's lines while keeping recovery gear tucked in. A recessed winch mount allows discreet placement and access through front slots.
It houses most 8k-12k winches; ComeUp, Smittybilt X20 and Warn Zeon and VR series are commonly used, but the Warn Epic fairlead is not compatible. It is designed around 30-inch single-row light bars and welded 3/4-inch D-ring tabs. It weighs 75 lbs and works with the TRD Pro skid plate. See more C4 Fabrication and Tacoma bumpers and armor.
| Spec | Detail |
|---|---|
| Weight | 75 lbs |
| Light bar | 30 in single row |
| D-rings | 3/4 in thick, welded front and back |
| Bull bar | None or mid-height |
Toyota Tacoma 3rd Gen, 2016-2023. Installation requires cutting the center section of the factory plastic bumper. Optional bull bar does not work on TRD Pro grille models.
Videos
Install guides & documents
Complete your Toyota Tacoma build
The pieces owners run with this one — matched to your Toyota Tacoma and to each other. Do the whole truck in one order instead of three.
$889.00
$799.00
$19.99
$1,060.95
$679.00
More for your Toyota Tacoma
Picked from the 2712 parts we carry for the Toyota Tacoma, matched to 2016–2023 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
C4 Fabrication Tacoma Front Lo-Pro Winch Bumper / 3rd Gen / 2016-2023 FAQs
Does the bull bar work with TSS?
The optional bull bar works with Toyota Safety Sense, though not on TRD Pro grille models.
Which light bars fit?
30 inch single-row bars, with guaranteed fitment for Baja Designs S8, Extreme LED 5D and RIGID SR series.
Is it compatible with the TRD Pro skid?
Yes.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
