C4 Fabrication 4Runner Rock Runner Front Bumper / 5th Gen / 1" Body Lift / 2010-2024
Warranty Information
C4 FAB LLC will warranty all products produced and distributed by C4 FAB LLC for ONE YEAR after the shipping date of the product. This warranty will include any issues caused by manufacture defects including failing or broken welds and/or failing or broken hardware and mechanical parts that are shipped with the product. C4 FAB LLC DOES NOT WARRANTY POWDER COAT FINISH ON ANY PRODUCTS THAT ARE SHIPPED POWDER COATED OR CAN BE ORDERED WITH THE OPTION TO BE POWDER COATED. Products will only be warrantied if installed in accordance with C4 FAB LLC installation guidelines. Any modification to the original product design, functionality, or use, by said customer voids all warranty eligibility. It is the sole discretion of C4 FAB LLC to determine warranty eligibility. Our One Year Warranty is effective for as long as the original retail purchaser owns the product. This warranty terminates when the original retail purchaser sells or otherwise transfers the product to any other person.
C4 FAB LLC reserves the right to remedy defects in workmanship or materials in one of three ways.
- C4 FAB LLC will issue replacements components to the customer that deems defective or inconsistent with the quality of its brand.
- C4 FAB LLC will elect to issue the customer a full or partial refund for the defects or damages of the product.
- C4 FAB LLC will pay the cost of having a shop near the customer perform repairs on the product if it is deemed that this option is more affordable and will satisfy the customers warranty request.
This warranty does not cover defects caused by normal wear and tear, rust, scratches, accidents, or products used for racing/competition. This warranty does not cover damage to the finish of powder coated products. C4 FAB LLC is not responsible for defects that are not in control of C4 FAB LLC such as, trail damage, highway damage or car accidents, overloading, incorrect assembly, poor maintenance practices or damaging acts of god such as extreme weather e.g.: hail, flooding, lightning, extreme wind.
REPLACEMENT OF A DEFECTIVE PRODUCT OR THE ISSUANCE OF A REFUND (AS DETERMINED BY C4 FAB LLC) IS A PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY. ANY AND ALL DAMAGE TO A PURCHASER’S VEHICLE, CARGO AND/OR TO ANY OTHER PERSON OR PROPERTY IS EXCLUDED.
The Rock Runner Front Bumper transforms your 5th Gen 4Runner into a trail-ready beast with a modular 3-piece design built for strength, clearance, and versatility. Designed for serious use, this bumper requires trimming the factory plastic bumper for a proper fit and maximum clearance. Constructed from 11-gauge laser-cut P&O steel with 3/16-inch thick mounting plates and winch plate, the Rock Runner provides a solid foundation for recovery and protection. Fully welded ¾-inch D-ring tabs are included standard, giving you reliable recovery points when you need them. Weight ranges from 100-108 lbs depending on your chosen configuration (plate or tube sides, with or without bull bar).
The bumper comes equipped with frame support brackets, a winch cover plate, and a bridge skid to tie into our existing skid plates and the factory cross member. It fits most 8k-10k winches, with Smittybilt X20 and Warn VR Series confirmed. Winches with synthetic rope and a hawse fairlead are recommended for the cleanest fit, though some trimming of the grille support brackets may be needed for integrated control box winches.
Lighting and utility are baked in. Tube side wings include mounts sized for up to one Baja Designs Squadron, one S2, and one S1 light per side, while front cutouts provide easy winch lever access. An aluminum fill panel completes the look if you’re running without a winch. For additional armor, a washer tank skid can be added.
Optional features include a TSS relocation bracket for 2020-2024 4Runners to keep Toyota Safety Sense fully functional. Unless you select the powder coat option, the bumper ships raw steel and must be painted or coated to prevent rust.
Note: This bumper is made for 4Runners with a 1" body lift. If you do not have a body lift, please choose the standard (no body lift) version of this bumper instead.
Complete your Toyota 4Runner build
More parts that fit your Toyota 4Runner and pair well with this one — matched and ready to install.
$1,249.00
$1,798.00
$599.00
$49.00
$179.00
More for your Toyota 4Runner
Picked from the 904 parts we carry for the Toyota 4Runner, matched to 2010–2024 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
