Baja Designs XL Linkable LED Light Bar Pre-Load Mount
Warranty Information
Vendor warranty summary
Baja Designs Warranty
At a glance: Limited lifetime (or 49,930 hours) on lights for recreational use; 5 years for commercial use
This is Baja Designs's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Light bars & auxiliary lights (recreational use) | Limited lifetime or 49,930 hours of operation, whichever comes first |
| Lights in commercial use (agriculture, industrial, mining, public safety) | 5 years or 49,930 hours, whichever comes first |
| sPOD electronics (bought after 4/1/23) | 5 years limited |
| Third-party brackets, harnesses, switches | Original manufacturer's warranty only |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in design and manufacturing only
- Baja Designs pays return freight if the defective item is sent back within 90 days of delivery
What's not covered
- Installation errors and installation labor
- Wear and tear, accidents, collisions, acts of God
- Misuse, abuse, or modifications not done by Baja Designs
- sPOD: water damage, reverse polarity, improper install
- Full warranty does not apply to items bought from unauthorized Amazon, eBay or Walmart resellers
- After 90 days from delivery, customer prepays freight to Baja Designs
How to make a Baja Designs warranty claim
- Call Baja Designs technical support to troubleshoot
- If inspection is needed, Baja issues an RMA form and number
- Ship the item marked with the RMA# to Baja Designs - Warranty, 2950 Norman Strasse Rd., San Marcos, CA 92069
Baja Designs contact: Phone: (760) 560-2252 · Email: bdwarranty@bajadesigns.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Baja Designs, and help it along either way.
Shop Baja Designs at NVMOS
Baja Designs Ford Bull Bar Light Kit - Ford 2023-2026 F-250/350 Super Duty
Baja Designs 7XL Linkable Bumper Light Kit - Ford 2023-2026 F-250/350 Super Duty
Baja Designs Ford XL Linkable Bumper Light Kit - Ford 2021-2026 Bronco; 2022-2026 Bronco Raptor; NOTE: w/ OE Steel Bumper
See all Baja Designs products, lead times and FAQs →
Disclaimer: The information on this page describes Baja Designs's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Baja Designs official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Baja Designs is the San Marcos, California lighting company that built the first forward-projecting LED light bar. NVMOS carries their pods, light bars and vehicle-specific bumper, fog and reverse kits for Ford, Toyota, Jeep, RAM and GM trucks, for drivers who want to actually see the trail at night.
Based in: San Marcos, California · Founded: 1992 · Lead time: In-stock ships in 24–48 hrs
Shop all 552 Baja DesignsWarrantyAll brands
Warranty terms are set by Baja Designs, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The Baja Designs XL Linkable Pre-Load Mount is the center support for long Linkable builds. Link six, seven or eight XL lights into one bar and a lot of weight ends up hanging in the middle; this kit carries that load so the bar stays steady instead of shaking on rough ground.
Why it works
- Made for long bars. Built for 6-, 7- and 8-link XL Linkable setups, where a lot of weight sits in the middle of the bar.
- Takes the load off the center. The kit takes load off the middle of the light system, where a long bar carries its weight.
- Less vibration. Supporting the center helps prevent the vibration a long, unsupported bar picks up off-road.
- Linkable specific. Designed specifically for the XL Linkable system.
How it fits into your build
This is not a stand-alone mount. It works together with the standard XL Linkable brackets, which still hold the bar. The lights are sold separately too, so a long-bar order is usually three pieces: the Linkable bar, the standard brackets and this pre-load kit. Browse more mounts and brackets or see Baja Designs lighting for the bars themselves.
Fitment
Universal. For Baja Designs XL Linkable setups of 6, 7 or 8 links.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Technical specifications
| Application | XL Linkable Lighting for 6, 7, 8 Links |
|---|---|
| Bracket Material | Stainless Steel |
| Description | Pre-Load Mount |
| Mounting Hardware Description | Bracketry; Hardware; Clear Protective Adhesive |
| Product Type | XL Linkable LED Light Bar Pre-Load Kit |
| Wiring Harness Included | No |
Complete your build
The pieces owners run with this one — matched to your build and to each other. Do the whole truck in one order instead of three.
Baja Designs XL Linkable LED Light Bar Pre-Load Mount FAQs
Who needs the pre-load kit?
Anyone linking 6, 7 or 8 XL Linkable lights together.
What does it do?
It takes the load off the center of the light system and prevents vibration.
Do I still need the standard brackets?
Yes. This kit supports the center, and the standard XL Linkable brackets mount the bar.
Is a light bar included?
No. This listing is the pre-load mount only.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
























