Baja Designs sPOD Touchscreen BantamX Kit - 2022-2026 Toyota Tundra
Warranty Information
Vendor warranty summary
Baja Designs Warranty
At a glance: Limited lifetime (or 49,930 hours) on lights for recreational use; 5 years for commercial use
This is Baja Designs's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: November 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Light bars & auxiliary lights (recreational use) | Limited lifetime or 49,930 hours of operation, whichever comes first |
| Lights in commercial use (agriculture, industrial, mining, public safety) | 5 years or 49,930 hours, whichever comes first |
| sPOD electronics (bought after 4/1/23) | 5 years limited |
| Third-party brackets, harnesses, switches | Original manufacturer's warranty only |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in design and manufacturing only
- Baja Designs pays return freight if the defective item is sent back within 90 days of delivery
What's not covered
- Installation errors and installation labor
- Wear and tear, accidents, collisions, acts of God
- Misuse, abuse, or modifications not done by Baja Designs
- sPOD: water damage, reverse polarity, improper install
- Full warranty does not apply to items bought from unauthorized Amazon, eBay or Walmart resellers
- After 90 days from delivery, customer prepays freight to Baja Designs
How to make a Baja Designs warranty claim
- Call Baja Designs technical support to troubleshoot
- If inspection is needed, Baja issues an RMA form and number
- Ship the item marked with the RMA# to Baja Designs - Warranty, 2950 Norman Strasse Rd., San Marcos, CA 92069
Baja Designs contact: Phone: (760) 560-2252 · Email: bdwarranty@bajadesigns.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Baja Designs, and help it along either way.
Shop Baja Designs at NVMOS
Baja Designs Ford Bull Bar Light Kit - Ford 2023-2026 F-250/350 Super Duty
Baja Designs 7XL Linkable Bumper Light Kit - Ford 2023-2026 F-250/350 Super Duty
Baja Designs Ford XL Linkable Bumper Light Kit - Ford 2021-2026 Bronco; 2022-2026 Bronco Raptor; NOTE: w/ OE Steel Bumper
See all Baja Designs products, lead times and FAQs →
Disclaimer: The information on this page describes Baja Designs's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Baja Designs official warranty information. Last updated on nvmos.com: November 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Baja Designs is the San Marcos, California lighting company that built the first forward-projecting LED light bar. NVMOS carries their pods, light bars and vehicle-specific bumper, fog and reverse kits for Ford, Toyota, Jeep, RAM and GM trucks, for drivers who want to actually see the trail at night.
Based in: San Marcos, California · Founded: 1992 · Lead time: In-stock ships in 24–48 hrs
Shop all 552 Baja DesignsWarrantyAll brands
Warranty terms are set by Baja Designs, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This kit puts the sPOD touchscreen in the 2022-on Tundra, in place of the in-cab sunglass holder. A BantamX module does the work with eight circuits at 30A each, and a single ethernet cable runs into the cab.
The screen shows battery voltage, current draw for each switch, and board temperature. It takes three lines of text for legends, turns the backlight off after 30 minutes idle, and powers down after six hours of inactivity or when the engine is not running. One screen can control up to 32 circuits, and up to four BantamX units can be daisy chained to it.
There is one trade-off: the vendor says the display becomes inoperable below 20 degrees F, so let the cab warm up first.
Fitment
Toyota Tundra, 2022-2026 (3rd generation).
What's included
The touchscreen comes with its own mounting bracket. The listing does not itemize the rest of the box, so ask us if you need a full contents check.
Install notes
Designed to replace the in-cab sunglass holder, with no cutting, no fishing wires into the cab and no tapping into the vehicle electrical system.
Bluetooth in the touchscreen is for programming rather than remote control, with a range of roughly 5 to 15 feet.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text us at (920) 249-7744.
Install guides & documents
Complete your Toyota Tundra build
More parts that fit your Toyota Tundra and pair well with this one — matched and ready to install.
More for your Toyota Tundra
Picked from the 2208 parts we carry for the Toyota Tundra, matched to 2022–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Baja Designs sPOD Touchscreen BantamX Kit FAQs
Does the touchscreen work in winter?
Not below 20 degrees F. Let the cab warm up before operating it.
Can it show how much each accessory draws?
Yes. It has an amperage meter for each switch, plus voltage and board temperature.
How many circuits can one screen control?
Up to 32, with up to four BantamX units daisy chained.
Which years does it fit?
The listing covers the 2022-2026 Tundra.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com


















