Baja Designs sPOD BantamX Touchscreen System - Universal
Warranty Information
Vendor warranty summary
Baja Designs Warranty
At a glance: Limited lifetime (or 49,930 hours) on lights for recreational use; 5 years for commercial use
This is Baja Designs's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Light bars & auxiliary lights (recreational use) | Limited lifetime or 49,930 hours of operation, whichever comes first |
| Lights in commercial use (agriculture, industrial, mining, public safety) | 5 years or 49,930 hours, whichever comes first |
| sPOD electronics (bought after 4/1/23) | 5 years limited |
| Third-party brackets, harnesses, switches | Original manufacturer's warranty only |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in design and manufacturing only
- Baja Designs pays return freight if the defective item is sent back within 90 days of delivery
What's not covered
- Installation errors and installation labor
- Wear and tear, accidents, collisions, acts of God
- Misuse, abuse, or modifications not done by Baja Designs
- sPOD: water damage, reverse polarity, improper install
- Full warranty does not apply to items bought from unauthorized Amazon, eBay or Walmart resellers
- After 90 days from delivery, customer prepays freight to Baja Designs
How to make a Baja Designs warranty claim
- Call Baja Designs technical support to troubleshoot
- If inspection is needed, Baja issues an RMA form and number
- Ship the item marked with the RMA# to Baja Designs - Warranty, 2950 Norman Strasse Rd., San Marcos, CA 92069
Baja Designs contact: Phone: (760) 560-2252 · Email: bdwarranty@bajadesigns.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Baja Designs, and help it along either way.
Shop Baja Designs at NVMOS
Baja Designs Ford Bull Bar Light Kit - Ford 2023-2026 F-250/350 Super Duty
Baja Designs 7XL Linkable Bumper Light Kit - Ford 2023-2026 F-250/350 Super Duty
Baja Designs Ford XL Linkable Bumper Light Kit - Ford 2021-2026 Bronco; 2022-2026 Bronco Raptor; NOTE: w/ OE Steel Bumper
See all Baja Designs products, lead times and FAQs →
Disclaimer: The information on this page describes Baja Designs's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Baja Designs official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Baja Designs is the San Marcos, California lighting company that built the first forward-projecting LED light bar. NVMOS carries their pods, light bars and vehicle-specific bumper, fog and reverse kits for Ford, Toyota, Jeep, RAM and GM trucks, for drivers who want to actually see the trail at night.
Based in: San Marcos, California · Founded: 1992 · Lead time: In-stock ships in 24–48 hrs
Shop all 554 Baja DesignsWarrantyAll brands
Warranty terms are set by Baja Designs, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The BantamX Touchscreen system is a universal eight-circuit power module with a touchscreen control panel. Only one ethernet cable runs into the cab, and the vendor says there is no cutting, no fishing wires and no tapping into factory wiring.
The module has eight circuits at 30A each, a 16-position terminal block, two RJ45 controller ports and low voltage cutoff with an optional override. It runs on 12 or 24 VDC, and uses current-sensing MOSFETs in place of fuses and relays. Up to four BantamX units can be daisy chained to one touchscreen, and one screen can control up to 32 circuits.
The touchscreen shows battery voltage, amperage for each switch and board temperature, and takes three lines of text for legends. The trade-off is cold: the vendor says it becomes inoperable below 20 degrees F, so let the cab warm up before using it.
Fitment
Universal. Choose a 36-inch or 84-inch battery cable set.
The touchscreen does not come with an arm or base. A RAM-201U double socket arm for 1-inch balls is required to mount it, with a RAM-238U base or RAM-224-1U suction cup base, all sold separately.
What's included
The BantamX module, a touchscreen control panel with its own mounting bracket, and a battery cable set in 36 or 84 inches. Ask us for a full contents check before ordering.
Install notes
Bluetooth in the touchscreen is for programming rather than remote control, with a range of roughly 5 to 15 feet.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
Baja Designs sPOD BantamX Touchscreen System FAQs
How do I mount the touchscreen?
You need a RAM-201U double socket arm for 1-inch balls, plus a RAM-238U base or RAM-224-1U suction cup base. These are sold separately.
Does it work in freezing weather?
Not below 20 degrees F. Let the cab warm up first.
Can I add more modules?
Yes. Up to four BantamX units can be daisy chained, for up to 32 circuits on one touchscreen.
Which cable length should I get?
Pick by the distance between the battery and the module: 36 or 84 inches.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
