Baja Designs sPOD BantamX Add-On Module - Universal
Warranty Information
Vendor warranty summary
Baja Designs Warranty
At a glance: Limited lifetime (or 49,930 hours) on lights for recreational use; 5 years for commercial use
This is Baja Designs's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Light bars & auxiliary lights (recreational use) | Limited lifetime or 49,930 hours of operation, whichever comes first |
| Lights in commercial use (agriculture, industrial, mining, public safety) | 5 years or 49,930 hours, whichever comes first |
| sPOD electronics (bought after 4/1/23) | 5 years limited |
| Third-party brackets, harnesses, switches | Original manufacturer's warranty only |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in design and manufacturing only
- Baja Designs pays return freight if the defective item is sent back within 90 days of delivery
What's not covered
- Installation errors and installation labor
- Wear and tear, accidents, collisions, acts of God
- Misuse, abuse, or modifications not done by Baja Designs
- sPOD: water damage, reverse polarity, improper install
- Full warranty does not apply to items bought from unauthorized Amazon, eBay or Walmart resellers
- After 90 days from delivery, customer prepays freight to Baja Designs
How to make a Baja Designs warranty claim
- Call Baja Designs technical support to troubleshoot
- If inspection is needed, Baja issues an RMA form and number
- Ship the item marked with the RMA# to Baja Designs - Warranty, 2950 Norman Strasse Rd., San Marcos, CA 92069
Baja Designs contact: Phone: (760) 560-2252 · Email: bdwarranty@bajadesigns.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Baja Designs, and help it along either way.
Shop Baja Designs at NVMOS
Baja Designs Ford Bull Bar Light Kit - Ford 2023-2026 F-250/350 Super Duty
Baja Designs 7XL Linkable Bumper Light Kit - Ford 2023-2026 F-250/350 Super Duty
Baja Designs Ford XL Linkable Bumper Light Kit - Ford 2021-2026 Bronco; 2022-2026 Bronco Raptor; NOTE: w/ OE Steel Bumper
See all Baja Designs products, lead times and FAQs →
Disclaimer: The information on this page describes Baja Designs's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Baja Designs official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Baja Designs is the San Marcos, California lighting company that built the first forward-projecting LED light bar. NVMOS carries their pods, light bars and vehicle-specific bumper, fog and reverse kits for Ford, Toyota, Jeep, RAM and GM trucks, for drivers who want to actually see the trail at night.
Based in: San Marcos, California · Founded: 1992 · Lead time: In-stock ships in 24–48 hrs
Shop all 552 Baja DesignsWarrantyAll brands
Warranty terms are set by Baja Designs, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This is an add-on BantamX for an existing sPOD system. It does not include a controller, and the vendor is clear that at least one sPOD controller must be connected for the system to work.
If you already run a BantamX or similar sPOD setup and need more circuits, this is the way to add them. Each module has eight circuits at 30A and a 16-position terminal block, runs on 12 or 24 VDC, and can be daisy chained, with up to four BantamX units controlled by one touchscreen.
Low voltage cutoff battery protection has an optional override, and a 100A in-line fuse protects the system.
Fitment
Universal, for existing sPOD systems and controllers only. It is offered with a 36-inch or 84-inch battery cable.
What's included
The BantamX module and a battery cable set in 36 or 84 inches. A controller is not included.
Install notes
The Pro-Series app unlocks extras such as circuit timers, switch lockout and programmable current limiting; the free app handles dimming, strobe, flash, momentary and switch linking.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Install guides & documents
Baja Designs sPOD BantamX Add-On Module FAQs
Can I use this on its own?
No. It needs at least one sPOD controller connected, and the controller is not included.
How many modules can one touchscreen run?
Up to four BantamX units can be daisy chained to one touchscreen.
Does it run on 24V?
Yes, 12 or 24 VDC.
Which cable length do I need?
Choose by the distance from the battery to the module: 36 inches or 84 inches.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
