Baja Designs RTL-M Spare Tire Mount Kit
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Baja Designs Warranty
At a glance: Limited lifetime (or 49,930 hours) on lights for recreational use; 5 years for commercial use
This is Baja Designs's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Light bars & auxiliary lights (recreational use) | Limited lifetime or 49,930 hours of operation, whichever comes first |
| Lights in commercial use (agriculture, industrial, mining, public safety) | 5 years or 49,930 hours, whichever comes first |
| sPOD electronics (bought after 4/1/23) | 5 years limited |
| Third-party brackets, harnesses, switches | Original manufacturer's warranty only |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in design and manufacturing only
- Baja Designs pays return freight if the defective item is sent back within 90 days of delivery
What's not covered
- Installation errors and installation labor
- Wear and tear, accidents, collisions, acts of God
- Misuse, abuse, or modifications not done by Baja Designs
- sPOD: water damage, reverse polarity, improper install
- Full warranty does not apply to items bought from unauthorized Amazon, eBay or Walmart resellers
- After 90 days from delivery, customer prepays freight to Baja Designs
How to make a Baja Designs warranty claim
- Call Baja Designs technical support to troubleshoot
- If inspection is needed, Baja issues an RMA form and number
- Ship the item marked with the RMA# to Baja Designs - Warranty, 2950 Norman Strasse Rd., San Marcos, CA 92069
Baja Designs contact: Phone: (760) 560-2252 · Email: bdwarranty@bajadesigns.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Baja Designs, and help it along either way.
Shop Baja Designs at NVMOS
Baja Designs Ford Bull Bar Light Kit - Ford 2023-2026 F-250/350 Super Duty
Baja Designs 7XL Linkable Bumper Light Kit - Ford 2023-2026 F-250/350 Super Duty
Baja Designs Ford XL Linkable Bumper Light Kit - Ford 2021-2026 Bronco; 2022-2026 Bronco Raptor; NOTE: w/ OE Steel Bumper
See all Baja Designs products, lead times and FAQs →
Disclaimer: The information on this page describes Baja Designs's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Baja Designs official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Baja Designs is the San Marcos, California lighting company that built the first forward-projecting LED light bar. NVMOS carries their pods, light bars and vehicle-specific bumper, fog and reverse kits for Ford, Toyota, Jeep, RAM and GM trucks, for drivers who want to actually see the trail at night.
Based in: San Marcos, California · Founded: 1992 · Lead time: In-stock ships in 24–48 hrs
Shop all 552 Baja DesignsWarrantyAll brands
Warranty terms are set by Baja Designs, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This mount puts a Baja Designs RTL-M rear light on a rear-facing spare tire carrier, positioned near the center of the wheel. It was designed around the Jeep JK's factory spare mount, and it also works with any carrier that uses a 5x127mm pattern. All the hardware comes in the kit. See more light mounts and brackets.
Why it works
- Centered position. The light sits near the center of the spare wheel, where it reads clean from behind.
- Uses existing lug points. The mount picks up two lug nut locations on the factory spare tire mount, so there is no drilling into the carrier.
- Not just for JKs. Any rear-facing carrier with a 5x127mm pattern will take it.
Install notes
Carriers vary, so confirm the bolt pattern on yours before ordering. The RTL-M light is sold separately; this kit is the mount and hardware. Browse the Baja Designs lighting line for the light itself.
In the box
- Spare tire mount
- All necessary hardware
Fitment
Jeep JK factory spare tire mount, and any rear-facing spare tire carrier with a 5x127mm pattern.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Technical specifications
| Application | RTL-M Lights |
|---|---|
| Bracket Material | Stainless Steel |
| Description | Spare Tire Mount |
| Product Type | RTL-M Spare Tire Mount Kit |
Complete your build
The pieces owners run with this one — matched to your build and to each other. Do the whole truck in one order instead of three.
$92.95
$26.95
$345.95
$761.95
$162.00
Baja Designs RTL-M Spare Tire Mount Kit FAQs
Will it fit a Jeep JK?
Yes. It was designed around the JK and picks up two lug nut locations on the factory spare tire mount.
Can I use it on other vehicles?
Yes, on any rear-facing carrier with a 5x127mm pattern.
Does it include hardware?
Yes. All necessary hardware is provided with each kit.
Is the RTL-M included?
No. This listing is the mount kit only.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
