Switch-Pro Accessory Bundle > Tacoma TRD Off Road/ 4Runner/ FJ Cruiser/ GX
Warranty Information
Vendor warranty summary
PowerTrays Warranty
At a glance: No written warranty published — we handle defects with the brand for you
This is PowerTrays's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
What to expect
PowerTrays doesn't publish a written warranty that we could find. In practice, parts that arrive damaged or show a manufacturing defect are handled between us and PowerTrays — you don't have to chase the brand on your own.
What PowerTrays does publish
- Items that arrive defective or damaged are replaced
- Returns and exchanges are accepted for 90 days
- Email PowerTrays with your order details and photos of the defect or damage
- Ship the item back as instructed
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to PowerTrays, and help it along either way.
Shop PowerTrays at NVMOS
sPOD BantamX PowerTray > Chevy Colorado 12-22
Tundra Bussmann RTMR PowerTray
Switch-Pros PowerTray > Jeep JL/JT 2018-Current > 3.6L V6
See all PowerTrays products, lead times and FAQs →
Disclaimer: The information on this page describes PowerTrays's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: PowerTrays official policy pages. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
PowerTrays makes vehicle-specific aluminum underhood mounts in Boulder, Colorado, for switch systems, fuse blocks and breakers. NVMOS carries the trays, accessory bundles, breakers and custom battery cables for Tacoma, 4Runner, FJ Cruiser, Lexus GX, Tundra, Jeep JL/JT and Colorado owners wiring up auxiliary power.
Based in: Boulder, Colorado · Made in: USA (Colorado) · Material: 1/8-inch brushed aluminum · Lead time: In stock: ships in 24–48 hours
Shop all 72 PowerTraysWarrantyAll brands
Warranty terms are set by PowerTrays, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Switch-Pro Accessory Bundle — Tacoma TRD Off Road / 4Runner / FJ Cruiser / GX
The supporting parts for a Switch-Pros 9100 on a PowerTray: circuit protection, in-house cables, a Blue Sea 6-circuit fuse block, busbar, terminal block and ring terminals. The Switch-Pros 9100 and the PowerTray mount are sold separately.
Cables use USA-made welding wire, tin-plated copper lugs, braided sheathing and 3M marine-grade heat shrink.
| Spec | Detail |
|---|---|
| Fitment | Tacoma TRD Off Road/Pro, 4Runner, FJ Cruiser, Lexus GX |
| Every option includes | Two 4-gauge grounds (3 in. fuse block to busbar, 16 in. busbar to fender), Blue Sea 5025 6-circuit fuse block, Blue Sea 2300 10-screw busbar, Blue Sea 8-circuit terminal block, Molex PermaSeal ring terminals (5 large, 5 small) |
| Dual MRBF cables | 26 in. (125A MRBF to Switch-Pros), 24 in. (100A MRBF to fuse block) |
| Dual CB cables | 21 in. battery to 100A CB, 21 in. battery to 120A CB, 42 in. 100A CB to fuse block, 30 in. 120A CB to Switch-Pros |
| Tap packs | None; 1 (ignition); 2, recommended (ignition, light sense); 3 (adds trigger) |
| Tie-down caution | Not for factory or vented lead-acid batteries; may need longer J-hooks (sold separately) |
Does this include the Switch-Pros or the tray?
No. The Switch-Pros 9100 and the Switch-Pros PowerTray mount are separate. This bundle covers everything else for the install.
Why the special fuse taps?
These Toyotas use low-profile mini fuses. The standard tap that comes with the Switch-Pros works, but it stands tall enough that the fuse box cover may need modifying to snap back on.
Will the battery tie-down work with my stock battery?
No. It needs a flat-top aftermarket battery. Factory and vented lead-acid batteries will not work because of the vents.
MRBF or circuit breakers?
Both protect the circuits. The breakers reset after a trip and have a manual trip button for cutting power while you work.
Complete your Toyota 4Runner build
More parts that fit your Toyota 4Runner and pair well with this one — matched and ready to install.
More for your Toyota 4Runner
Picked from the 1846 parts we carry for the Toyota 4Runner. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com























