2018-2026 Jeep Wrangler JL & 2020-2025 Gladiator JT OE Plus Front Bumper
Warranty Information
Vendor warranty summary
DV8 Offroad Warranty
At a glance: 1-year limited warranty against defects in materials and workmanship
This is DV8 Offroad's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| All DV8-manufactured parts | 1 year from purchase |
| Third-party products sold by DV8 | Original manufacturer's warranty only |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials and workmanship on DV8-made parts
- DV8 decides whether to repair or replace with an equivalent product
What's not covered
- Installation, labor and freight
- Normal wear and tear
- Abuse, misuse, collision damage or neglect
- Altered, modified or improperly installed products
- Consequential losses such as vehicle downtime
How to make a DV8 Offroad warranty claim
- Notify DV8 within one month of discovering the defect
- Return the part to DV8 at your expense within the 1-year period
- DV8 inspects it and repairs or replaces if the defect is confirmed
DV8 Offroad contact: Phone: 855-680-9595 · Email: sales@dv8offroad.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to DV8 Offroad, and help it along either way.
Shop DV8 Offroad at NVMOS
883 Simulated Beadlock Wheel | Matte Bronze 20" 5x127
2021-2026 Ford Bronco | Adaptive Cruise Control Relocation Bracket
2021-2026 Ford Bronco | Digital Device Dash Mount
See all DV8 Offroad products, lead times and FAQs →
Disclaimer: The information on this page describes DV8 Offroad's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: DV8 Offroad official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
DV8 Offroad designs steel armor and accessories in Chandler, Arizona and Riverside, California. NVMOS carries their bumpers, skid plates, rock sliders, fender flares, MOLLE storage, racks and interior parts for Jeep Wrangler and Gladiator, Ford Bronco, and a growing list of Toyota, Ford, GM and Ram trucks.
Based in: Chandler, Arizona · Designed in: Chandler, AZ & Riverside, CA · Lead time: In-stock ships in 24–48 hrs
Shop all 498 DV8 OffroadWarrantyAll brands
Warranty terms are set by DV8 Offroad, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
DV8 Offroad OE Plus Front Bumper — Jeep Wrangler JL (2018–2026) & Gladiator JT (2020–2026)
The OE Plus Series bumper (FBJL-13) follows the lines of the factory bumper but trades the plastic for 3 mm and 5 mm steel, a recessed winch mount and a removable bull bar.
Removable wings let you run it full width for more coverage or stubby for tire clearance on technical trails. It fits all trims and works with factory tow hooks if your Jeep has them.
| Spec | Detail |
|---|---|
| Part number | FBJL-13 |
| Fitment | 2018–2026 Jeep Wrangler JL and 2020–2026 Jeep Gladiator JT, all trims |
| Material | 3 mm and 5 mm steel |
| Finish | Micro-texture black powder coat |
| Included | Removable bull bar, removable wings, winch plate cover, two light mounts |
| Light mounts | (2) 3 in. pod lights or (2) 4 in. fog lights |
| Tow hooks | Compatible with factory tow hooks if equipped |
| Not compatible | Factory front skid plate (DV8 recommends its Sway Bar Disconnect Skid Plate) |
| Front camera | Bull bar and winch may block the camera on equipped Jeeps |
| Install | Bolt-on, about 4 hours; minor trimming may be required |
Does it work with the factory front skid plate?
No. DV8 states it is not compatible with the factory front skid plate and recommends its Sway Bar Disconnect Skid Plate instead.
Will it block my front camera?
On Jeeps with a front camera, the bull bar and a mounted winch may obstruct its view.
Can I run it without a winch?
Yes. A winch plate cover is included to close up the recessed mount.
Is any cutting required?
It is a bolt-on install of about 4 hours, but DV8 notes minor trimming may be required.
Compatibility
| 2018-2026 Jeep Wrangler JL | All Trims |
|---|---|
| 2020-2026 Jeep Gladiator JT | All Trims |
Install guides & documents
Complete your Jeep Gladiator build
More parts that fit your Jeep Gladiator and pair well with this one — matched and ready to install.
More for your Jeep Gladiator
Picked from the 1730 parts we carry for the Jeep Gladiator, matched to 2018–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com





































